• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.1
• /
• pp.106-122
• /
• 2021

This study confirmed the mechanical properties of an auxetic re-entrant pattern prepared using 3D printing technology and its composite fabric with neoprene for the production of functional auxetic patterns/textiles for safety shoes. Samples were prepared by the tilt angle of a re-entrant pattern of 0°, 30°, 45°, 60° and 90°, and then analyzed using Poisson's ratio, bending, compression, and tensile properties. A 3D printed auxetic re-entrant pattern (3DP-RE) and its composite fabric (3DP-RE/NP) showed a negative Poisson's ratio in all tilting angles that indicated auxetic properties. The results of the bending property shown that strength of 3DP-RE/NP was 1.5 times lower than NP, but the strain improved 2.0 times. It was confirmed that the deformation of 3DP-RE/NP is possible with a low load. Each sample type of compression behavior indicated similar regardless of the tilting angles; in addition, the compression toughness of 3DP-RE/NP increased 1.2 times compared with NP. In the case of tensile properties, 3DP-RE and 3DP-RE/NP were affected by the tilting angle, samples with 90° (the opposite of load direction) showed best tensile property and toughness. 3DP-RE/NP indicated improved bending, compression, and tensile properties.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.763-770
• /
• 2000

In this paper, a new stereo image compression algorithm is suggested in which the residual image extracted from the stereo image by the disparity-compensated prediction method is compressed using the wavelet transform considering the inter & intra correlation between subbands. The compression performance of the proposed method is significantly improved by comparing with the conventional algorithm such as EPIC, EPWIC & JPEG through the computer simulation and the PSNR is also increased about 3.5dB compared with the EPIC. Finally, the stereo image having a good 3D effect can be reconstructed from the compressed image data by the proposed method.

• Korean Journal of Computational Design and Engineering
• /
• v.7 no.2
• /
• pp.81-88
• /
• 2002

Transmission of 3D shape model through Internet has become one of the hottest issues in these days. Presented in this paper is a new approach for the rapid transmission of the geometry data of the shape model. By analyzing the important three factors, the shape fidelity, the file size, and the decompression time, for the compression, we point out the potential problems of previous approaches of using the deltas between consecutive vertices and propose an alternative of directly using the position values of vertices of the model. It turns out that the proposed approach has smaller file size, has lesser distortion in the model, and the decompression is faster.

• Electronics and Telecommunications Trends
• /
• v.38 no.2
• /
• pp.66-74
• /
• 2023

Holography is the most promising 3D imaging technology to faithfully record and reproduce light information. In addition, it is widely explored in metrology for applications such as microscopy and tomography because it can accurately measure 3D shapes. However, the data size of a digital hologram is very large, and the data characteristics are notably different from those of conventional 2D images. The Joint Photographic Experts Group (JPEG) is a group of experts from the International Organization for Standardization/International Electrotechnical Commission. This group develops and maintains standards for still image compression. In 2014, the JPEG released a new standard for 3D image compression called JPEG Pleno to represent light fields, point clouds, and holograms. Among them, JPEG Pleno Holography is the first international standard for hologram compression. We review recent advances in JPEG Pleno Holography standardization and discuss future directions of development.

• Proceedings of the IEEK Conference
• /
• 2003.11a
• /
• pp.175-178
• /
• 2003

This paper proposes a stereo image insertion technique on DCT coefficients using the embedded method developed in the digital watermarking in due consideration of compatibility with conventional 2D system such JPEG, and MPEG. In conventional transmission method users with conventional digital TV cannot watch the transmitted 3D image sequence as 2D image, because of affectivity of conventional 3D image compression. To give an answer, in this paper, DCT coefficients are changed according to its disparity on YCbCr channels. Our method can insert stereo images into a conventional image compression method based on DCT.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1608-1615
• /
• 2004

CFD data compression methods based on Full-3D and Quasi-1D supercompact multiwavelets are presented. Supercompact wavelets method provide advantageous benefit that it allows higher order accurate representation with compact support. Therefore it avoids unnecessary interaction with remotely located data across singularities such as shock. Full-3D wavelets entails appropriate cross-derivative scaling function & wavelets, hence it can allow highly accurate multi-spatial data representation. Quasi-1D method adopt 1D multiresolution by alternating the directions rather than solving huge transformation matrix in Full-3D method. Hence efficient and relatively handy data processing can be conducted. Several numerical tests show swift data processing as well as high data compression ratio for CFD simulation data.

• ETRI Journal
• /
• v.39 no.1
• /
• pp.1-12
• /
• 2017

In this paper, we present a new approach for the progressive compression of three-dimensional (3D) mesh geometry using redundant frame dictionaries and sparse approximation techniques. We construct the proposed frames from redundant linear combinations of the eigenvectors of a combinatorial mesh Laplacian matrix. We achieve a sparse synthesis of the mesh geometry by selecting atoms from a frame using matching pursuit. Experimental results show that the resulting rate-distortion performance compares favorably with other progressive mesh compression algorithms in the same category, even when a very simple, sub-optimal encoding strategy is used for the transmitted data. The proposed frames also have the desirable property of being able to be applied directly to a manifold mesh having arbitrary topology and connectivity types; thus, no initial remeshing is required and the original mesh connectivity is preserved.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.203-204
• /
• 2007

In this work, we propose a compression algorithm for depth images, which are obtained from multi-view sequences. The proposed algorithm represents a depth image using a 3-D regular triangular mesh and predictively encodes the mesh vertices using a linear prediction scheme. The prediction errors are encoded with a arithmetic coder. Simulation results demonstrate that the proposed algorithm provides better performances than the JPEG2000 lossless coder.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.4
• /
• pp.612-625
• /
• 2018

This study designed 16 kinds of basic structure and 4 kinds of modified structure for impact protection pads with a spacer fabric shape. The pad is a structure in which hexagonal three-dimensional units, composed of a surface layer and a spacer layer, are interconnected. Designed pads were printed with flexible $NinjaFlex^{(R)}$ materials using a FDM 3D printer. The printed pads were evaluated for impact protection performance, compression properties and sensory properties. The evaluation of the impact protection performance indicated that basic structures better than CR foam material at 20cm height were DV1.5, DX1.5, DX1.0, DV1.0 and HV1.5. The evaluation of the compression properties for the five types, with good results in the impact protection performance, indicated that DV1.0, DX1.0, DV1.5, HV1.5 and DX1.5 showed good results, respectively. The sensory evaluation of DV1.0, DX1.0, and DV1.5, which with good results when considering both the impact protection performance and the compression performance, showed that DV1.0 were the best for surface, flexibility, compression and weight. Therefore, DV1.0 is shown to be the best structure for protection pads.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.269-270
• /
• 2007

In previous work[1], each codeblock is coded using a context which is adaptively selected from three kinds of scanning directions after 3D DWT. But some subbands still have correlations among the coefficients in horizontal, vertical or temporal direction. In this paper, we propose a new 3D DWT-based video compression technique in which the difference of coefficients is calculated in one of three directions for every codeblocks and coded by a context adaptively selected for each codeblock. Experimental results show that the proposed compression technique outperforms measurably and visually compared to the conventional DWT-based techniques.