• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.664-667
• /
• 2010

A new poinsettia cultivar 'Clara' was bred by the National Institute of Horticultural and Herbal Science (NIHHS) in 2005. A cross was made between 'Red Velvet', a variety with dark green leaves and red bracts, and 'Freedom Bright Red', a variety with early short day responding and bright red bracts, in 2002. 'Clara' was finally selected in 2005 after the investigation of the growth and flowering characteristics from 2003 to 2005. 'Clara' has red ovate bracts and weak intensity of rugosity between bract veins. Leaf blade is ovate and medium green. Petiole length is relatively short, and stem color is reddish. 'Clara' has medium free-branching ability and makes short and compact canopy. Clara's bracts and transitional leaves are fully colored 9 weeks after short day commencement.

• Korean Journal of Breeding Science
• /
• v.42 no.6
• /
• pp.611-614
• /
• 2010

A new poinsettia cultivar 'Heidi' was bred by the National Institute of Horticultural and Herbal Science (NIHHS) in 2004. A cross was made between 'Freedom Rose', a variety with vigorously growing deep pink color, and 'Red Velvet', a variety with dark green leaves and red bracts in 2001. 'Heidi' was finally selected in 2004 after the investigation of the growth and flower characteristics from 2002 to 2004. It has velvety red colored elliptic bracts and transitional leaves, and medium intensity of rugosity between bract veins. Leaf blade is dark green, ovate shape and lobes are shallow. Petiole length is relatively short and stem color is reddish. 'Heidi' has free-branching ability and plant height is short. The bracts and transitional leaves are fully colored 7.5 weeks after short day commencement.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.568-571
• /
• 2011

A new poinsettia cultivar 'Green Dream' was bred by the National Institute of Horticultural and Herbal Science (NIHHS) in 2009. A cross was made between 'Lemon Snow', a variety with dark green leaves and light yellow-green bracts, and 'Freedom Rose', a variety with vigorously growing deep pink bracts in 2006. 'Green Dream' was finally selected in 2009 after the investigation of the growth and flowering characteristics from 2007 to 2009. 'Green Dream' has light yellow-green ovate bracts and medium intensity of rugosity between bract veins. Leaf blade is ovate and dark green. Petiole length is long, and stem color is greenish. 'Green Dream' has medium free-branching ability and long plant height. 'Green Dream's bracts and transitional leaves are fully colored 7 weeks after short day commencement.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.1
• /
• pp.11-17
• /
• 1999

This experiment was conducted to select and utilize the tolerant rice varieties for ozone stress through comparing the physiological responses. In SOD activity, Backunchalbyeo which treated once by 0.15 ppm $0_3$, Ilpumbyeo and Inbujinado treated twice showed significantly different SOD activity compared with $non-O_3$ treatment. No significant difference of SOD activity in three-times $0_3$ treated Sangnambatbyeo and Hangangchalbyeo was found as compared to ($non-O_3$ treated)control, POD activity, when Sangnammbatbyeo, Hangsngchalbyeo, Ilpumbyeo and Inbujinado were sequently treated by third ozone, showed no significant difference between $O_3$ treatment and $non-O_3$. In the comparison of amino acid content in rice leaf blade between three times $O_3$ treatment and $non-0_3$ treatment in 3 varieties, phenylalanine content represent as increased quantities. Especially, in three times $0_3$ treatment of Sangnambatbyeo, phenylalanine content(O.66 mg/g) was significantly increased as compared with $non-O_3$. Visual-growing characters of Sangnembatbyeo were significantly different between $0_3$ treatment and non-treatment. However, grain-filling rate showed no difference. SOD and POD related to resistant mechanism were high activity. In addition, phenylalanine known as precursor which is synthesized resistant materials was increased by $0_3$ treatment. These results suggested that Sangnambatbyeo which increased SOD and POD activity, and phenylalanine content under ozone stress could be selected as a tolerant variety.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1638-1643
• /
• 2018

Multi-layer ceramic capacitors as decoupling capacitor were fabricated by dielectric composition with a high dielectric constant. The fabricated decoupling capacitors were embedded in the PCB of the 10G RF transceiver module and evaluated for the characteristics of electrical noise by the level of AC input voltage. In order to further improve the electrical properties of the $BaTiO_3$ based composite, glass frit, MgO, $Y_2O_3$, $Mn_3O$, $V_2O_5$, $BaCO_3$, $SiO_2$, and $Al_2O_3$ were used as additives. The electrical properties of the composites were determined by various amounts of additives and optimum sintering temperature. As a result of the optimized composite, it was possible to obtain a density of $5.77g/cm^3$, a dielectric constant of 1994, and an insulation resistance of $2.91{\times}10^{12}{\Omega}$ at an additive content of 5wt% and a sintering temperature of $1250^{\circ}C$. After forming a $2.5{\mu}m$ green sheet using the doctor blade method, a total of 77 layers were laminated and sintered at $1180^{\circ}C$. A decoupling capacitor with a size of $0.6mm(W){\times}0.3mm(L){\times}0.3mm(T)$ (width, length and thickness, respectively) and a capacitance of 100 nF was embedded using a PCB process for the 10G RF Transceiver modules. In the range of AC input voltage 400mmV @ 500kHz to 2200mV @ 900kHz, the embedded 10G RF Transceiver modules evaluated that it has better electrical performance than the non-embedded modules.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.226-236
• /
• 1999

Growth, reproduction, mortality, and production of Laminaria japonica were experimentally studied at a cultivation ground on the coast of llkwang, where the largest amount of cultivated Laminaria has been produced in Korea. For this experiment, young sporophytes (0.33 cm in mean length) grown in the laboratory were transplanted at the depth of 3 m and field surveys on them were conducted twice a month from December, 1995 to August, 1996. Plants exhibited an annual life span; they were completely dead by August. Frond width, thickness, and wet weight showed similar pattern of seasonal growth and reached their maxima in July, but frond length showed no more increment after May. Maximum mean frond length and weight were 199.8 cm and 333.0 g wet wt., respectively. Overall meristematic growth in length and weight were 384.0 cm and 393.6 g wet wt., respectively. Absolute growth rates (AGR) which were calculated from the length of tissue developed from meristem varied seasonally; AGR of length and weight reached maxima in March (3.6 $cm{\cdot}d^{-1}$) and May (3.8 g wet $wt{\cdot}d^{-1}$), respectively. Absolute attrition rates gradually increased from February to July. Seasonal differences in growth and attrition rates appeared to be related to seawater temperature and nitrogen concentration in seawater. Reproductive sporophytes bearing sprorangium sorus began to occur from April, and the ratio of sorus area to blade area reached its maximum in July (0.034). Survival rate was exponentially decreased; more than 90% of plants decayed within 56 days after outplanting. After February, mortality was size-specific; mortality of smaller plants less than 30 cm in length were relatively higher. Maximum biomass occured in July (285.6 kg wet $wt{\cdot}m^{-2}$) and annual production was 758.7 kg wet $wt{\cdot}m^{-2}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.5
• /
• pp.363-370
• /
• 2013

Small scale hydropower is one of most attractive and cost-effective energy technologies for installation within sewage treatment plants. This study was conducted to evaluate the potential of a semi-kaplan micro-hydropower (MHP) system for application to sewage treatment plants with high flow fluctuations and a low head. The semi-kaplan MHP is equipped with an adjustable runner blade, and is without a guide vane, so as to reduce the incidence of mechanical problems. A MHP rating 13.4 kWp with a semi-kaplan turbine has been considered for Kiheung Respia sewage treatment plant, and this installation is estimated to generate 86.8 MWh of electricity annually, which is enough to supply electricity to over 25 households, and equivalent to an annual reduction of 49 ton $CO_2$. The semi-kaplan turbine showed a 90.2% energy conversion efficiency at the design flow rate of 0.35 $m^3/s$ and net head of 4.7 m, and was adaptable to a wide range of flow fluctuations. Through the MHP operation, approximately 2.1% of total electricity demand of Kiheung Respia sewage treatment plant will be achievable. Based on financial analysis, an exploiting MHP is considered economically acceptable with an internal rate of return of 6.1%, net present value of 15,539,000 Korean Won, benefit-cost ratio of 1.08, and payback year of 15.5, respectively, if initial investment cost is 200,000,000 Korean Won.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.31 no.1
• /
• pp.1-7
• /
• 1998

Uronate compositions and molecular weights of alginates from the four kinds of brown algae, sea mustard (Undaria pinnatifida), sea tangle (Laminaria japonica), gulf weed (Sargassum fulvellum), and seaweed fusiforme (Hizikia fusiforme), in regard with the harvesting season were investigated. Sea mustard contained the highest amount of alginates in the four kinds of brown algae. D-Mannuronic acid to L-guluronic acid (M/C) ratio of the alginates was high in order of seaweed fusiforme, gulf weed, sea mustard, and sea tangle, and especially in water-soluble alginate. Molecular weights of the alginates were greater with the growing period ranging in $4,500\~4,800\;kDa$ for sea tangle, $4,000\~4,200\;kDa$ for sea mustard, $3,300\~3,400\;kDa$ for seaweed fusiforme, and $3,000\~3,200\;kDa$ for gulfweed. In water-soluble alginate of sea mustard, M/G ratio was much higher in sporophyll than in midrib and blade.

• Horticultural Science & Technology
• /
• v.32 no.3
• /
• pp.296-302
• /
• 2014

The foliage of variegated Solomon's seal is excellent in cut flower arrangements. However, it has a restricted marketing period because the harvesting is limited in spring and summer. The increased interest requires the year-round production, thus techniques for dormancy breaking and forcing without low temperature treatment is needed. Therefore, experiments were conducted to d etermine whether gibberellic acid (GA) could break dormancy in variegated Solomon's seal. Thes prouting of dormant bud did not occur throughout the experiment when $GA_3$ $400mg{\cdot}L^{-1}$ was applied to dormant rhizomes as a soil drench. However, when plants were treated with a GA drench after scratch with razor blade or were given direct injection of GA, percent sprouting was increased up to 100 or 83.3%, respectively. However, because treatments with razor or syringe may damage internal organs, we tested another method, scarifying the rhizomes with sodium hypochlorite (NaOCl). Rhizome scarification with 4% NaOCl for 6 or 24 hours followed by drench of $GA_3$ $400mg{\cdot}L^{-1}$ increased the dormancy breaking percentage to 70 or 86.7%, respectively. Moreover, scarified and GA-treated rhizomes produced more leaves than untreated or GA-soil drenched plants in the glasshouse. These results showed the possibility of year-round production of variegated Solomon's seal foliage with rhizome scarification and GA treatments.

• International Journal of Ocean System Engineering
• /
• v.2 no.3
• /
• pp.185-194
• /
• 2012

A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.