• 제목/요약/키워드: 3D Based

검색결과 15,785건 처리시간 0.049초

淸州 및 報恩地方의 頭首工洪水災害에 關한 調査硏究(II) -災害原因 및 對策方案을 中心으로- (A Study on the Damages of Head Works by the Storm Flood in the Area of Cheong Ju and Boeun -Emphasis onFactors Influenced on the Disasters and their Countermeasures-)

  • 남성우;김철기
    • 한국농공학회지
    • /
    • 제24권2호
    • /
    • pp.49-55
    • /
    • 1982
  • The purpose of this study is to classify the factors influenced on the damages of head works suffered from the storm flood occurred on July 22 1980 in both Musim and Bochong rivers and to find out an integral counter measures against the causes influenced on the disaster of head works in the engineering aspect of planning, design, construction and maintenance. In this survey, number of samples was taken 25 head Works, and the counter measures against the causes of their disasters summarized was as follows, 1. In the aspect of planning a. As the flood water level after the establishment of head works is more increased than the level before setting of head works owing to having more gentle slope of river bed between the head works than nature slope of river bed. Number of head works should be reduced for the appropriate annexation of them b. In the place where head works is established on the curved point of levee, the destruction of levee becomes severe by the strong deflective current. Therefore the setting of head works on the curved point should be kept off as long as possible and in case of unavoidable circumstances the construction method such as reinforced concrete wall or stone wall filed with concrete and anchored bank revetments should be considered. 2. In the aspect of design a. As scoring phenomena at up stream is serious around the weir Where the concentration of strong current is present in such a place, up stream apron having impermeability should be designed to resist and prevent scoring. b. As the length of apron and protected bed is too short to prevent scoring as down stream bed, the design length should be taken somewhat more than the calculated value, but in the case the calculated length becomes too long to be profitable, a device of water cushion should be considered. c. The structure of protected river bed should be improved to make stone mesh bags fixed to apron and to have vinyl mattress laid on river bed together with the improvement for increasing the stability of stone mesh bags and preventing the sucked sand from the river bed. d. As the shortage of cut-off length, especialy in case of the cutoffs conneting both shore sides of river makes the cause of destruction of embankment and weir body, the culculation of cut-off length should be taken enough length based on seepage length. 3. In the aspect of design and constructions a. The overturing destruction of weir by piping action was based on the jet water through cracks at the construction and expansion joints. therefore the expansion joint should be designed and constructed with the insertion of water proof plate and asphalt filling, and the construction joint, with concaved shape structure and steel reinforcement. b. As the wrong design and construction of the weep holes on apron will cause water piping and weir destruction, the design and construction of filter based on the rule of filter should be kept for weep holes. c. The wrong design and construction of bank revetment caused the severe destruction of levee and weir body resulting from scoring and impulse by strong current and formation of water route behind the revetment. Therefore bank revetment should be designod and constructed with stone wall filled with concrete and anchored, or reinforced concrete wall to prevent the formation of water flow route behind the wall and to resist against the scoring and impulse of strong stream. 4. In the aspect of maintenance When the damaged parts occurred at head works the authorities and farmers concerned should find and mend them as soon as possible with mutual cooperation, and on the other hand public citizen should be guided for good use of public property.

  • PDF

디지털미디어 환경(環境)에서 디자인 특성(特性)에 관한 연구(硏究) - 실내제품(室內製品) 디자인을 중심으로 - (A Destructive Method in the Connection of the Algorithm and Design in the Digital media - Centered on the Rapid Prototyping Systems of Product Design -)

  • 김석화
    • 조형예술학연구
    • /
    • 제5권
    • /
    • pp.87-129
    • /
    • 2003
  • The purpose of this thesis is to propose a new concept of design of the 21st century, on the basis of the study on the general signification of the structures and the signs of industrial product design, by examining the difference between modern and post-modern design, which is expected to lead the users to different design practice and interpretation of it. The starting point of this study is the different styles and patterns of 'Gestalt' in the post-modern design of the late 20th century from modern design - the factor of determination in industrial product design. That is to say, unlike functional and rational styles of modern product design, the late 20th century is based upon the pluralism characterized by complexity, synthetic and decorativeness. So far, most of the previous studies on design seem to have excluded visual aspects and usability, focused only on effective communication of design phenomena. These partial studies on design, blinded by phenomenal aspects, have resulted in failure to discover a principle of fundamental system. However, design varies according to the times; and the transformation of design is reflected in Design Pragnanz to constitute a new text of design. Therefore, it can be argued that Design Pragnanz serves as an essential factor under influence of the significance of text. In this thesis, therefore, I delve into analysis of the 20th century product design, in the light of Gestalt theory and Design Pragnanz, which have been functioning as the principle of the past design. For this study, I attempted to discover the fundamental elements in modern and post-modern designs, and to examine the formal structure of product design, the users' aesthetic preference and its semantics, from the integrative viewpoint. Also, with reference to history and theory of design my emphasis is more on fundamental visual phenomena than on structural analysis or process of visualization in product design, in order to examine the formal properties of modern and post-modern designs. Firstly, In Chapter 1, 'Issues and Background of the Study', I investigated the Gestalt theory and Design Pragnanz, on the premise of formal distinction between modern and post-modern designs. These theories are founded upon the discussion on visual perception of Gestalt in Germany in 1910's, in pursuit of the principle of perception centered around visual perception of human beings. In Chapter 2, I dealt with functionalism of modern design, as an advance preparation for the further study on the product design of the late 20th century. First of all, in Chapter 2-1, I examined the tendency of modern design focused on functionalism, which can be exemplified by the famous statement 'Form follows function'. Excluding all unessential elements in design - for example, decoration, this tendency has attained the position of the international style based on the spirit of Bauhause - universality and regularity - in search of geometric order, standardization and rationalization. In Chapter 2-2, I investigated the anthropological viewpoint that modern design started representing culture in a symbolic way including overall aspects of the society - politics, economics and ethics, and its criticism on functionalist design that aesthetic value is missing in exchange of excessive simplicity in style. Moreover, I examined the pluralist phenomena in post-modern design such as kitsch, eclecticism, reactionism, hi-tech and digital design, breaking away from functionalist purism of modern design. In Chapter 3, I analyzed Gestalt Pragnanz in design in a practical way, against the background of design trends. To begin with, I selected mass product design among those for the 20th century products as a target of analysis, highlighting representative styles in each category of the products. For this analysis, I adopted the theory of J. M Lehnhardt, who gradated in percentage the aesthetic and semantic levels of Pragnantz in design expression, and that of J. K. Grutter, who expressed it in a formula of M = O : C. I also employed eight units of dichotomies, according to the G. D. Birkhoff's aesthetic criteria, for the purpose of scientific classification of the degree of order and complexity in design; and I analyzed phenomenal aspects of design form represented in each unit. For Chapter 4, I executed a questionnaire about semiological phenomena of Design Pragnanz with 28 units of antonymous adjectives, based upon the research in the previous chapter. Then, I analyzed the process of signification of Design Pragnanz, founded on this research. Furthermore, the interpretation of the analysis served as an explanation to preference, through systematic analysis of Gestalt and Design Pragnanz in product design of the late 20th century. In Chapter 5, I determined the position of Design Pragnanz by integrating the analyses of Gestalt and Pragnanz in modern and post-modern designs In this process, 1 revealed the difference of each Design Pragnanz in formal respect, in order to suggest a vision of the future as a result, which will provide systemic and structural stimulation to current design.

  • PDF

높은 아치형 지중강판 구조물의 시공 중 거동 분석 (Behaviors of the High-profile Arch Soil-steel Structure During Construction)

  • 이종구;조성민;김경석;김명모
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.71-84
    • /
    • 2003
  • 지중강판 구조물은 강판부재 내에 발생하는 휨모멘트에는 매우 취약하기 때문에 그 주변을 양질의 흙으로 뒷채움하여 주변 흙과의 상호작용에 의하여 상부에 작용하는 하중을 지지한다. 그러나, 구조물 측면을 뒷채움할 때나 최소토피고를 확보하지 못한 상태에서 활하중이 작용할 때에는 강판부재내에 과도한 모멘트가 발생할 수 있다. 현재 설계기준에서는 허용변형량을 제시하여 시공 중에 과도한 변형이 발생하는 것을 방지하고 있으며 Duncan(1979)과 McGrath 등(2001)은 강도해석법을 제안하여 시공 중에 발생하는 모멘트를 강판의 소성강도 이내로 제한하고 있지만, 허용변형량은 경험적으로 규정한 값이고 강도해석에 의한 구조 안정성 검토는 유한요소 해석결과를 바탕으로 제안되었기 때문에 이들에 대하여 실험적 검증이 필요하다. 이 연구에서는 높은 아치형 구조물에 대한 실규모 현장시험을 실시하여 시공 중 거동과 활하중에 대한 하중지지 거동을 분석하였다. 시험결과를 바탕으로 시험시공 구조물의 허용변형량을 '높이의 1.45%' 로 추정할 수 있었는데 이는 설계기준의 허용값인 '높이의 2%' 보다 작은 값이었다. 또한, 계측결과를 Duncan과 McGrath 등이 제안한 강도해석결과와 비교하여 Duncan은 성토하중에 의한 모멘트는 과소평가하고 활하중 모멘트는 과대평가 하지만 McGrath 등은 두 값을 모두 실제와 근접하게 예측함을 알 수 있었다. 그러나, 두 방법에 의한 소성힌지에 대한 안전율은 실제 안전율과 잘 일치하여 두 방법 모두 시공 중에 작용하는 활하중에 대한 구조 안정성을 적절히 평가할 수 있음을 확인하였다.나 길항력(6.4 ㎜)은 남아있었다. 또한 분자량 10kDa 이하의 분획에서는 chitinase 활성은 없으나 길항력(5.2㎜)은 나타내었고, 80℃에서 열처리하여도 길항력(5.0mm)이 남아있어 효소 이외 다른 생리활성물질이 존재함을 확인하였다.rin, (+)-taxifolin 3-O--$\beta$-D-glucopyranoside, (+)-catechin 및 benzoic acid의 함량은 건조 및 처리 온도가 증가할 수록 감소하는 양상을 나타내었다.tier taste and the Doenjang with P. japonica Powder had the least sweet taste. In the flavor and overall Preference, the Doenjang with P. japonica powder was the lowestEX>로 측정되었고, 계사내 지붕의 표면 온도는 최고 $29^{\circ}C$가 측정되었다. 계사 내 표면 온도 및 닭의 표면 온도는 계사내 공기온도의 영향을 많이 받는 것으로 나타났다.ill in a good agreement with those predicted by Rohsenow's formula, which was based on nucleate boiling. For the condenser, the wall temperatures were practically uniform, and the measured values of condensation heat transfer coefficient were 1.7 times

증강현실 기반 제품 디자인의 몰입감 향상 기법 (Methodologies for Enhancing Immersiveness in AR-based Product Design)

  • 하태진;김영미;류제하;우운택
    • 전자공학회논문지CI
    • /
    • 제44권2호
    • /
    • pp.37-46
    • /
    • 2007
  • 본 논문에서는 증강현실 환경에서 제품 디자인 시, 가상객체를 재현하는 데 있어 몰입감을 향상 시킬 수 있는 기법들을 제안한다. 일반적으로 사용자가 가상의 객체와 상호작용을 하는 경우, 시각/청각/촉각 등의 다차원 감각을 사용자에게 제공하는 것은 몰입감을 향상시킬 수 있는 가장 보편적인 방법으로 알려져 있고, 이를 만족시키기 위해 다음과 같은 방법들을 제안한다. 대게 가상객체는 물리적인 존재가 없기 때문에 사용자에게 촉감을 제공하지 못하는 문제점이 있지만, 만질 수 있는 감각형 객체 (Tangible object)에 가상객체를 정합함으로써, 가상객체는 촉감을 제공할 수 있다. 또한 손을 이용하여 가상객체와 상호작용 할 때, 가상객체의 렌더링에 의해 손이 가려지는 어색한 증강결과를 부분적으로 해결함으로써, 시각적으로 자연스런 증강결과를 사용자에게 제공할 수 있다. 마지막으로, 가상객체와 상호작용 시 발생하는 이벤트에 따라, 페이지 모터 (Page motor)를 통한 진동 피드백과 공기촉감 피드백 그리고 사운드 피드백을 제공하여 다차원 피드백 (Multimodal feedback)을 가능케 하여 몰입감을 한층 향상시킨다. 어플리케이션으로써 게임 폰 모델의 재현 시스템을 구현하였고, 사용자는 가상 게임폰이 정합된 감각형 객체를 손에 쥐고 기울임으로써 레이싱 게임의 자동차를 조종할 수 있고, 동시에 제안된 촉각 피드백과 손 가림 현상이 줄어든 시각적인 효과 그리고 이벤트에 따른 사운드 피드백이 동시에 사용자에게 제공된다. 이 제안된 방법론들은 기존 AR 시스템의 실감 모델의 재현에 있어 몰입감을 향상시키는데 공헌을 할 수 있다.다. 제주지역 목장 토양 및 조사료에서 특정 미량광물질이 결핍되어 있는 것으로 보이지 않는다. 따라서 가축에게 미량광물질 첨가제의 보충급여는 사양형태나 사료 미량광물질의 함량 및 이용도 등을 고려하여 결정해야 할 것으로 사료된다.$100^{\circ}C$ 30분 또는 $121^{\circ}C$에서 15분간의 열처리(autoclave)에 의해서 항균활성이 감소되지않는 것으로 나타났다. 따라서 약용으로 이용되고 있는 천궁의 근경 이외의 미활용자원인 잎과 줄기 등의 지상부위를 이용한 천연 항균소재 개발이 가능할 것으로 판단된다. 따르면, 버들치 (Rhynchocypris oxycephalus), 갈겨니 (Zacco temmincki)와 같은 수질에 대해 민감한 어종은 상류(S1 ${\sim}$ S2)에서의 출현빈도가 하류지점에의 출현빈도에 비해 뚜렷하게 높게 나타나 수질 특성을 반영하는 것으로 나타났으며, 트로픽구조 측면에서 내성종 (Tolerant species)및 잡식성종(Omnivore species)이 하류로 갈수록 증가하는 경향을 보였다.대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여

국민건강영양조사 자료에 의한 식이 패턴별 1인 가구의 영양 상태와 대사증후군 위험도 (Nutritional status and metabolic syndrome risk according to the dietary pattern of adult single-person household, based on the Korea National Health and Nutrition Examination Survey)

  • 금유빈;여계명;서정숙
    • Journal of Nutrition and Health
    • /
    • 제54권1호
    • /
    • pp.23-38
    • /
    • 2021
  • 본 연구는 수행된 제6기와 제7기 1차년도 국민건강영양조사 2013-2016 자료를 이용하여 만 19-64세 성인 1인 가구의 식이 패턴에 따른 건강 및 영양상태를 조사하고 대사증후군 구성요소의 유병율과 위험도를 분석하였다. 주요 식이 패턴 도출을 위해 연구대상자의 장기간 섭취 패턴을 파악하고 만성질환과의 연관성을 평가하기에 적절한 [47] 반정량 식품섭취빈도조사지를 이용하였다. 식품섭취빈도조사지의 개별식품을 19개의 식품군으로 재분류하고 군집분석을 실시한 결과, 연구대상자들의 식이 패턴은 '밥과 김치' 패턴, '혼합식' 패턴, '유제품과 과일' 패턴의 총 3개 군집으로 추출되었다. 식이 패턴에 따른 연구대상자들의 일반적 특성은 '밥과 김치' 패턴과 '혼합식' 패턴에서 남성의 비율이 높았으며, 여성의 비율은 '유제품과 과일' 패턴에서 높았다. 연령은 '혼합식' 패턴은 19-29세가 많았으며, '유제품과 과일' 패턴은 50-64세가 많았다. 교육수준도 식이 패턴 간에 차이를 보였는데, '밥과 김치' 패턴에서 저학력 비율이 높은 반면 '유제품과 과일' 패턴은 고학력 비율이 높았다. 식생활 관련 요인을 비교한 결과, '혼합식' 패턴에서 아침 결식과 외식 비율이 높았으며, '유제품과 과일' 패턴은 식이보충제 이용이 높은 것으로 나타났다. 건강관련 요인을 분석한 결과, '혼합식' 패턴에서 높은 음주 빈도와 흡연 비율을 보였고, EQ-5D index는 '밥과 김치' 패턴에서 낮은 점수를 보였다. 영양소 섭취량을 비교한 결과에서 탄수화물 섭취량은 '밥과 김치' 패턴에서 높은 것으로 나타났으나, 그 외 지방, 비타민 A, 리보플라빈, 비타민 C, 나이아신, 칼슘, 인, 칼륨은 모두 '유제품과 과일' 패턴에서 섭취량이 가장 높았다. 본 연구에서는 식이 패턴에 따른 대사증후군 위험요소 위험도를 파악하기 위해 교란변수들을 차례로 보정한 후 분석을 실시하였다. 허리둘레와 중성지방은 기준치 이상이 될 위험도가 연령과 성별을 보정한 후에도 '유제품과 과일' 패턴에서 기준식이 패턴인 '밥과 김치' 패턴에 비해 각각 0.217배, 0.444배로 낮아졌으나 BMI, 폐경, 흡연상태, 음주, 에너지 섭취량을 보정한 후에는 유의적인 차이가 없었다 '밥과 김치' 패턴을 기준으로 대사증후군의 위험도를 비교하였을 때, 보정하지 않은 Model 1에서는 '유제품과 과일' 패턴에서 대사증후군 위험이 0.395배 (95% CI = 0.204-0.763)로 낮아 유의한 차이를 보였다. 교란변수를 차례로 보정한 후 식이 패턴이 대사증후군 위험도에 미치는 영향을 분석한 결과에서는 유의적인 차이를 나타내지 않았다. 현재 지속적으로 1인 가구가 증가하고 있는 추세로 보아 1인 가구에 대한 실태 파악은 매우 중요하다. 따라서 1인 가구의 식이 섭취 현황을 기반으로 한 특성을 다양하게 고려하여 대상별 영양관리 프로그램을 맞춤형으로 실시한다면 이들의 건강 및 영양관리가 효율적으로 이루어질 수 있을 것이다.

지식이전 선행요인에 관한 다차원 분석: 사회적 자본 이론과 사회연결망 이론의 결합 (Multi-level Analysis of the Antecedents of Knowledge Transfer: Integration of Social Capital Theory and Social Network Theory)

  • 강민형;허용석
    • Asia pacific journal of information systems
    • /
    • 제22권3호
    • /
    • pp.75-97
    • /
    • 2012
  • Knowledge residing in the heads of employees has always been regarded as one of the most critical resources within a firm. However, many tries to facilitate knowledge transfer among employees has been unsuccessful because of the motivational and cognitive problems between the knowledge source and the recipient. Social capital, which is defined as "the sum of the actual and potential resources embedded within, available through, derived from the network of relationships possessed by an individual or social unit [Nahapiet and Ghoshal, 1998]," is suggested to resolve these motivational and cognitive problems of knowledge transfer. In Social capital theory, there are two research streams. One insists that social capital strengthens group solidarity and brings up cooperative behaviors among group members, such as voluntary help to colleagues. Therefore, social capital can motivate an expert to transfer his/her knowledge to a colleague in need without any direct reward. The other stream insists that social capital provides an access to various resources that the owner of social capital doesn't possess directly. In knowledge transfer context, an employee with social capital can access and learn much knowledge from his/her colleagues. Therefore, social capital provides benefits to both the knowledge source and the recipient in different ways. However, prior research on knowledge transfer and social capital is mostly limited to either of the research stream of social capital and covered only the knowledge source's or the knowledge recipient's perspective. Social network theory which focuses on the structural dimension of social capital provides clear explanation about the in-depth mechanisms of social capital's two different benefits. 'Strong tie' builds up identification, trust, and emotional attachment between the knowledge source and the recipient; therefore, it motivates the knowledge source to transfer his/her knowledge to the recipient. On the other hand, 'weak tie' easily expands to 'diverse' knowledge sources because it does not take much effort to manage. Therefore, the real value of 'weak tie' comes from the 'diverse network structure,' not the 'weak tie' itself. It implies that the two different perspectives on strength of ties can co-exist. For example, an extroverted employee can manage many 'strong' ties with 'various' colleagues. In this regards, the individual-level structure of one's relationships as well as the dyadic-level relationship should be considered together to provide a holistic view of social capital. In addition, interaction effect between individual-level characteristics and dyadic-level characteristics can be examined, too. Based on these arguments, this study has following research questions. (1) How does the social capital of the knowledge source and the recipient influence knowledge transfer respectively? (2) How does the strength of ties between the knowledge source and the recipient influence knowledge transfer? (3) How does the social capital of the knowledge source and the recipient influence the effect of the strength of ties between the knowledge source and the recipient on knowledge transfer? Based on Social capital theory and Social network theory, a multi-level research model is developed to consider both the individual-level social capital of the knowledge source and the recipient and the dyadic-level strength of relationship between the knowledge source and the recipient. 'Cross-classified random effect model,' one of the multi-level analysis methods, is adopted to analyze the survey responses from 337 R&D employees. The results of analysis provide several findings. First, among three dimensions of the knowledge source's social capital, network centrality (i.e., structural dimension) shows the significant direct effect on knowledge transfer. On the other hand, the knowledge recipient's network centrality is not influential. Instead, it strengthens the influence of the strength of ties between the knowledge source and the recipient on knowledge transfer. It means that the knowledge source's network centrality does not directly increase knowledge transfer. Instead, by providing access to various knowledge sources, the network centrality provides only the context where the strong tie between the knowledge source and the recipient leads to effective knowledge transfer. In short, network centrality has indirect effect on knowledge transfer from the knowledge recipient's perspective, while it has direct effect from the knowledge source's perspective. This is the most important contribution of this research. In addition, contrary to the research hypothesis, company tenure of the knowledge recipient negatively influences knowledge transfer. It means that experienced employees do not look for new knowledge and stick to their own knowledge. This is also an interesting result. One of the possible reasons is the hierarchical culture of Korea, such as a fear of losing face in front of subordinates. In a research methodology perspective, multi-level analysis adopted in this study seems to be very promising in management research area which has a multi-level data structure, such as employee-team-department-company. In addition, social network analysis is also a promising research approach with an exploding availability of online social network data.

  • PDF

물체 크기와 뻗기 거리가 상지 움직임에 미치는 영향 (The Effects of Object Size and Reaching Distance on Upper Extremity Movement)

  • 배수영;김태훈
    • 대한지역사회작업치료학회지
    • /
    • 제10권1호
    • /
    • pp.51-61
    • /
    • 2020
  • 목적 : 정상인을 대상으로 팔뻗기 수행 시 물체 크기와 뻗기 거리가 상지의 운동형상학적 요소에 미치는 영향을 알아보고자 하였다. 연구 방법 : 대상자는 부산시 D대학교에 재학 중인 대학생 30명이며 측정 도구는 삼차원 동작 분석기인 CMS-70P(Zebris Medizintechnik Gmbh, Germany)를 사용하였다. 과제는 6가지 조건이다. 팔뻗기 수행시 물체 크기(2cm, 10cm)와 뻗기 거리(15%, 37.5%, 60%)의 변화에 따른 움직임의 평균 속도, 평균 가속도, 최대 속도, 속도의 정점수를 측정하였다. 대상자의 일반적 특성은 기술통계를 사용하였다. 두 가지 물체 크기에서 세 가지 뻗기 거리로 팔뻗기 과제를 수행했을 때 변수를 비교하기 위해 일원분산분석(One-way ANOVA measure)으로 분석하였고, 사후검정은 Tukey 검정을 실시하였다. 또한 세 가지 뻗기 거리에서 두 가지 물체 크기에 따른 운동형상학적 차이를 분석하기 위해서 독립 t검정(Independent t-test)을 사용하였다. 팔뻗기 거리(15%, 37.5%, 60%)와 물체 크기(2cm, 10cm)에 따른 상호작용효과를 확인하기 위해 이원분산분석(3×2 Two-way ANOVA measure)을 실시하였다. 통계적 유의수준 α는 .05로 설정하였다. 결과 : 정상인은 물체 크기와 뻗기 거리의 변화에 따라 상지 움직임에 유의한 차이가 있었다. 물체 크기가 동일한 경우 뻗기 거리가 길어질수록 평균 속도, 최대속도가 증가하였고, 속도의 정점 수는 감소하였다. 뻗기 거리가 동일한 경우 물체 크기가 커질수록 평균 속도, 최대 속도가 증가하였고 속도의 정점 수는 감소하였다. 물체 크기와 뻗기 거리의 변화는 평균 가속도에 영향을 미치지 않았으며 유의한 차이가 없었다. 결론 : 과제를 시간적, 공간적 특성으로 제한하는 것은 대상자의 상지 움직임에도 영향을 미치게 된다. 따라서 본 연구의 결과를 토대로 신경학적 기능수준에 따라 세밀하게 등급화된 과제제공에 도움이 될 것으로 사료된다.

X-ray CT Scanner를 이용한 MAGAT (Methacrylic Acid, Gelatin Gel and THPC) 중합체 겔 선량계의 선량 반응성 연구 (A Study on Dose Response of MAGAT (Methacrylic Acid, Gelatin Gel and THPC) Polymer Gel Dosimeter Using X-ray CT Scanner)

  • 정재용;이충일;민정환;김연래;이성용;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제21권1호
    • /
    • pp.1-8
    • /
    • 2010
  • CT 촬영 장치를 기반으로 한 MAGAT (Methacrylic Acid, Gelatin gel And THPC) 정상 산소 중합체 겔 선량계의 화합물 조성비와 CT 영상 스캔 인자의 변화에 따른 선량 반응성을 평가하였다. 다양한 농도의 메타크릴산(MAA, MethAcrylic Acid)과 젤라틴을 조성하여 MAGAT 선량계를 제작하고 20 Gy까지의 방사선을 조사하였다. 조사된 겔 선량계는 CT 촬영 장치(Brilliance Big bore scanner, Phillps, Netherlands)를 이용하여 다양한 스캔 인자(관전압, 관전류, 단면두께)로 같은 위치에서 20회까지의 CT 영상을 획득하였다. 획득된 영상으로 $N_{CT}$-선량 반응곡선($N_{CT}$-dose response), 선량 감도(dose sensitivity), 선량 분해능(dose resolution)을 측정, 평가하였다. 각 조성비 별 MAGAT 선량계의 $N_{CT}$-선량 반응곡선에서 메타크릴산과 젤라틴의 양이 증가함에 따라 기울기와 절편이 증가하였다. 선량 감도는 $0.338{\pm}0.08$에서 $0.859{\pm}0.1$까지 나타났고 메타크릴산이 증가, 젤라틴이 감소할수록 증가하였으나 그 변화는 메타크릴산 농도의 증가에 따라 감도가 증가되는 것에 비해 아주 작은 변화를 보였다. 선량 분해능은 약 2.6에서 6 Gy까지 다양하게 나타났으며 감도와 영상 내의 노이즈에 의해 큰 변화를 보였다. 영상 스캔 인자의 변화에 대한 반응곡선은 관전압, 관전류, 단면두께의 변화에 따른 곡선의 기울기와 감도는 큰 변화를 보이지 않았으나 영상 내의 노이즈(평균 CT number의 표준편차)는 위의 3개의 인자가 증가할수록 감소함을 보였다. 본 연구는 CT 촬영장치를 이용한 MAGAT 중합체 겔의 선량 반응성을 평가하여 적정한 조성비와 스캔 인자를 얻을 수 있었으며 CT를 기반으로 한 3차원 선량계를 간단하고 효율적으로 임상에 적용할 수 있을 것으로 사료된다.

조산사의 라마즈 산전교육에 대한 중요성 인식과 수행정도 및 저해요인에 관한 연구 (Midwives' Perceptions of the Importance of Teaching the Lamaze Method of Childbirth Preparation, Their Practice of it and Inhibiting Factors.)

  • 윤귀람;조미영
    • 모자간호학회지
    • /
    • 제2권1호
    • /
    • pp.21-33
    • /
    • 1992
  • This study was done to investigate how importantly midwives thought of Lamaze Method of Childbirth, how satisfactorily they performed their Lamaze Method of Childbirth and what inhibited their activities from being performed if not done satisfactorily. The subjects of this study were 76midwives at midwifery in Pusan, Deagu, Kyungnam and Kyungbok. Data were collected by using questionaire from Sep. 1 to Sep.30, 1991. The measurement tools was maded by the researcher based on Kim's scale for prenatal nursing activities. The statistical analysis was done with based statistical values likes frequencies, means, standard deviations and advanced methods such as Pearson's correlation coefficient, 1-test, F-test, F-test by using SPSS package program. The results of this study can be summarized as follows ; 1. The results of Investigating perception according to importance degree and performance degree of Lamaze Method of Childbring showed that midwives were slightly below both perception according to importance(2.17) and performance(2.16) of Lamaze Method of Childbirth 2. Inhibiting factors of Lamaze Method of Childbirth were abscence of husband(3.08), lack of teaching room(2.71), and lack of books or literature of Lamaze Method (2.58). 3. There appears to be a positive relation between perception according to importance degree and performance degree of Lamaze Method of Childbirth (r=0.69, P<0.01). There appears to be a negative relation between perception according to importance degree and inhibit factors of performance (r=-0.38, P<0.01). There appears to be a negative relation between performance and inhibit factors of performance (r=-0.22. P<0.01). 4. The item of highest perception defree in prenatal education is 1st, Consultation about sexual life (2.53), End, illustration of the importance of a bath and perinal cleanliness and Avoidance of excessive respiration method and also its comfortable application during uterine contractility(2.45). The item of lowest perception degree is about pregnant symptom sign and predicted date of birth (E.D.C.). On the other hand, The item of highest performance degree is education about nurtrition during pregnacy. 2nd, Illustration of the Importance of a bath and perineal cleanness(2.45). The lowest one is leaching the pregnant woman and her family about the role of husband and her family and also teaching the couple to learn exercise and respiration method (1.84). Though importance perception degree and performance degree is low. Midwives who wert subject in this research shoves that they perform general items concerning prenatal education well. 5. In the relationship between perception according to importance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in mean number of visiting pregnacies for 1 month. 6. In the relationship between performance degree of Lamaze Method of Childbirth and the general characteristics of subjects, the differences in age, marriage, and mean number of visiting pregnancies for 1 month. With the above information we see the importance of midwife prenatal care education and high correlation between performance degree and perception degree. When Lamaze prenatal education is well performed the number of pregnant woman who have follow-up, check-ups increase. Therefore in this research we can validity that there is a relation between Lamaze prenatal education and patient follow-up. This research showes in a situation where if one does not maximally perform a prenatal education there is a possibility that the popular use of midwife activities may encounter obstacles so the education to save new knowledge and training for prenatal education is needed as a function of Lamaze prenatal education, when a special Lamaze education is well performed for the pregnant woman, who follows-up at amidwife clinic. With the above conclusion we can suggest : 1. Continued research which minimized obstacles to Lamaze prenatal education is needed. 2. The official method of midwives is necessary.

  • PDF

정위적 방사선 수술시 3차원적 공간상 단위분포들의 자동계산법에 의한 간접적 병소 근사화 방법의 개발 (Development of Independent Target Approximation by Auto-computation of 3-D Distribution Units for Stereotactic Radiosurgery)

  • 최경식;오승종;이정우;김정기;서태석;최보영;김문찬;정현태
    • 한국의학물리학회지:의학물리
    • /
    • 제16권1호
    • /
    • pp.24-31
    • /
    • 2005
  • 정위적 방사선 수술은 한 번에 두 개내 병소에는 고선량의 방사선을 조사하면서, 주위 정상조직에는 최소한의 방사선이 조사되도록 시술하는 치료기법이다. 본 연구는 정위적 방사선 수술시 자동적 치료계획을 수행하기 위하여, 선형가속기와 감마나이프의 다수의 회전중심점을 이용하는 치료계획에 대한 물리적 격자구조에 기반한 새로운 방법을 개발하였다. 최적의 방사선 수술계획은 많은 빔관련 변수들의 조합으로서 만들어진다. 본 연구에서는 선형가속기와 감마나이프 수술시 빔 측면도의 50% 수준에서의 선량분포가 콜리메이터/헬멧의 구멍 크기와 일치하는 점을 이용하여 하나의 회전중심점을 중심으로 선량분포를 구형으로 모델화시켰다. 그리고, 다수의 회전중심점들은 병소내 위치와 크기를 고려한 정육면체 구조와 1×1×1 ㎣의 체적소 단위의 계산에 의해 자동적으로 배치시켰다. 이 기법에 의한 치료계획 방법은 선량체적히스토그램, 선량의 일치성, 선량의 균질성의 병소내 선량분포로서 평가되었다. 그 결과, 새로운 기법은 불규칙한 병소들에 대하여 프로그램 시스템에 의해 빠르게 다수의 회전중심점들을 배치시켰다. 또한, RTOG의 권고사항에 언급된 병소내 선량분포의 일치성, 균질성이 기준을 잘 만족하였고, 병소들은 50% 이상의 등선량 곡선 내에 포함되었다. 이와 같은 성과는 불규칙하게 형성된 병소와 선형가속기나 감마나이프와 같은 다른 치료 장치 기법들에서 특별한 제약없이 보편적으로 적용이 될 수 있을 것으로 생각된다.

  • PDF