• Journal of the Korean Society of Radiology
• /
• v.13 no.7
• /
• pp.947-953
• /
• 2019

The purpose of this study was to manufacture a wrist brace using a computerized tomography system, clinical design software (MediACE 3D Program), and 3D printer. After acquiring the Dicom file of the upper limb with a computed tomography, the wrist brace was designed using the MediACE 3D Program to create a "stereolithography" file. The designed wrist brace was printed using a 3D printer. To verify the effectiveness of wrist assistive device manufactured by 3D printing technology, the stress distribution of the pressure and orthosis applied to bone and skin is represented by finite element analysis. It is expected that the wrist brace can be manufactured by reinforcing the part where the damage caused by pressure and breakage of the brace frequently occurs with the result of finite element analysis when producing the wrist brace.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.13 no.1
• /
• pp.73-91
• /
• 1995

Spectroscopic and Photoelectric Characteristics in the Cyanine and Merocyanine Dye according to systematically change of their structures were experimentally discussed. As result, in solution, Hetero atoms(X) of Cyanine and Merocyanine dye were participated in resonance X of d obital rather than X of pobital,effected in resonance and contributed in extension of conjugated system. in solid film,new spectra,called eximer-fluorenscence,were appeared in 3-dimensional fluorenscence of high density of Cyanine dye but not of Merocyanine. The activational energy of conductivity in Merocyanine dye was lower than in cyanine, an the contrary,the drift mobility was higher and the former in photoelectric characteristics was more effec-tive than the latter. In this paper,authors invertigated the changes of dye structure by molecular obital method to confirm the results of spectroscopic and photoelectric characteristics in the Cyanine and Merocyanine Dye acco-rding to systematically cally change of their structure, and counted total energy on dihedral angle and dipol miments if dyes in S0 and S1.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.29 no.3
• /
• pp.97-104
• /
• 2011

The storing ability of information of optical disks directly depends on the physical property of recording unit cells. It means that the degradation of optical disks ultimately causes the loss of the physical and chemical properties of recording unit cells and leads also information, too. We investigated the degradation and life time of optical disks which tell us the longevity of the preservation of information. Optical disks were aged using the accelerated aging system and studied by optical reflectivity spectroscopy and atomic force microscopy(AFM), and the preservation environment of electronic media in National central library of Korea also were analysed. Results show that the double reflective coated optical disks have good preservation of recording information but revealed some deformation of dye area in the AFM images. It means that we should include the mechanical and chemical degradation of the optical disks in the life time expectation evaluation.

• Proceedings of the Korean Printing Society Conference
• /
• 1995.11a
• /
• pp.13-17
• /
• 1995

헤테로원자(X=O, S, Se)의 변환에 따라 용액상에서 Merocyanine색소 및 Cyanine색소의 헤테로원자X는 p궤도의 원자보다 d궤도의 원자가 공명에 관여하여 공역계확장에 기여하였고, 유전률이 큰 용매 일수륵 Merocyanine색소는 장파장으로 흡수극대치가 이동하였다. 또 Cyanine색소의 기저상태는 $I^-$이온과 정전하 발색단을 가진 이온성 화합물로 되어 있으므로 극성용매에서 $I^-$ 이온의 전하가 색소본체로 전하 이동전이가 발생하여 단파장화 하였다. 고상에서 색소의 농도가 높을 수록 색소분자간의 거리가 가까워져 색소 상호작용이 변화하여 흡수스펙트럼에서는 전체적으로 폭이 넓은 형태로 나타났으며 이것은 농도가 높을 수록 색소분자간의 거리가 가까워져 색소 상호작용이 변화한 때문이라고 생각된다. 또한 3차원 형광의 저농도에서 보이지 않는 새로운 스펙트럼이 Cyanine색소에서 나타났으며 이 스펙트럼은 색소고유의 흡수에 기인한 것으로 Eximer형광으로 생각된다. 광전특성에 있어서는 Merocyanine색소가 Cyanine색소보다 활성화에너지가 낮아 전하이동도가 커짐에 따라 높은 광전특성을 나타내었다. 그리고 Merocyanine색소 헤테로원자(X)의 비교에서 광전특성은 O

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1069-1072
• /
• 2017

최근에 360도 파노라마(Panorama) 사진과 영상을 이용한 가상현실 콘텐츠 제작이 급격히 증가하고 있다. 본 연구에서는 지역문화유산의 360도 파노라마 VR 콘텐츠 속에 존재하는 3D 대상물들(Objects)을 실시간으로 출력하는 시스템에 대해 연구하였다. 본 논문에서 제안하는 시스템은 지역문화유산의 가상투어(Virtual tour)뿐만 아니라 가상투어상의 주요 대상물들을 3D 프린터로 실시간 인쇄하여 소유할 수 있다는 특징을 갖는다. 지역문화유산의 가상현실을 통한 학습효과에 추가하여 주요 문화유산의 3D 모형의 출력을 통해 지역문화유산의 형태를 좀 더 현실감 있게 학습할 수 있다는 장점과 가상투어와 디지털 생산(Digital Manufacturing)/가상 생산(Virtual Manufacturing) 기술이 결합하는 새로운 형태의 서비스가 가능할 것으로 생각된다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.8
• /
• pp.1021-1029
• /
• 2001

Rapid prototyping(RP) is a novel technology to create 3D products directly from CAD system. This study proposes a new RP method which uses the PZT ceramic plate to make a Drop-On-Demand liquid jet from the nozzle. The characteristic of drop formation in the new system is investigated both numerically and experimentally. The optimal drop for 3-D Printing can be obtained by the proper amplitude and frequency of the applied voltage. Also the process of the drop formation is analyzed using the pressure wave theory and verified by numerical simulation. First, the pressure wave generated by the deformation of the Piezo-plate at the nozzle is analyzed by solving the 2D axisymmetric wave equation via Finite Element Method. Finally, the drop formation process is simulated using a commercial software, FLOW 3D considering the pressure at the nozzle obtained by solving the wave equation as the boundary condition.

• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.11-16
• /
• 2017

This study reviews the structure of wooden printing blocks in Japan, focusing on the blocks as three-dimensional objects. Inspection is more effective three-dimensionally than two-dimensionally, and for the first time in wooden printing block research, the study uses a 3D CT scanner and a high-resolution 3D digitizer. The 3D CT scanner examines cross sections of the blocks and identifies their grain and contents, including insects surviving within them. The 3D digitizer enables observation of objects up to 0.02 mm; this allows detailed collection of block surface information, which is difficult to identify with a conventional microscope.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.749-752
• /
• 2005

In the industry, three-dimensional coloring has been needed for realistic prototype from rapid prototyping. Z-corporation developed a 3D printer which provides three-dimensional colored prototype. However, the existing process cannot be adopted to models from other rapid prototyping process. In addition, time and cost for manufacturing colored prototype still remain to be improved. In this study, a new coloring process using ink-jet head is proposed for color printing on three-dimensional prototype surface. Process parameters such as the angle and the distance between ink-jet nozzle and the three-dimensional surface should be investigated from experiments. The correction matrix according to sloped angle to minimize the distortion of 2D image was proposed by analysis of printing error. Therefore, approximated method for angle and discrete length according to the radius of curvature for printing on the curved surface was proposed. By printing image on the doubly curved surface, the method was verified. As a practical example, helmet was chosen for printing images on the curved surface. The character images were applied with approximated method for angle and discrete length and was printed on the helmet surface.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.286-292
• /
• 2020

This study presents an angular-based measurement on three-dimensional paper-based analytical devices (3D-PADs) for quantitative detection of albumin without using an image analyzer. We demonstrate a simple quantitative and straightforward approach based on the angle of the discolored area as detection criteria. 3D-PADs are rapidly fabricated by the wax-printing and laminating process. The 3D-PADs are treated with citrate buffer and tetrabromophenol blue to react with albumin in a sample solution. Dropping sample solution into sample pad in the 3D-PAD, fluid flows toward the assay zone laterally and vertically by capillary action. We find that the change of angle of the discolored area correctly reflects the concentration of albumin and is reliable determinant for the measurement of the albumin concentration. It is the first demonstration of angular-based detection as a simple, inexpensive, and equipment-free approach for point-of-care diagnosis.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.44 no.3
• /
• pp.41-48
• /
• 2012

Materials used for the inks in the printing industry is an important material following the paper. The composition of the ink is pigment and organic solvents. However, Ink is used in a variety of chemicals, they are classified as non-green. Therefore, rosin-modified phenolics manufactured by the reaction of phenol and formaldehyde can take the place of eco-phenol free resin and by experiment density, gloss, trapping, contrast and dot gain of printing has been studied as printability. The result of study can support that the properties of printing using eco-phenol free resin such as density, gloss, contrast and trapping is similar to existing ink. In the part of dot gain, the result is excellent. So we were thought to be able to improve some characteristics such as dispersion of black ink, that will be possible for the field applicability.