• Korean Journal of Weed Science
• /
• v.7 no.2
• /
• pp.200-207
• /
• 1987

This study was conducted to select and develop herbicide resistant plant through tissue culture. Growth response of seedlings and callis of various rice varieties with Echinochloa species was assessed under the treatment of various rates of butachlor [N-(butoxy methyl)-2-chloro-2', 6'-diethyl acetamide] and simetryne [2,4-bis(ethyl amino)-6-methyl thio-1,3,5-triazine]. Further, succinate dehydrogenase activity was determined in herbicide treated callus to characterize different response of plants to herbicide. Rice variety like Sangpung showed relative resistance in both callus and seedling states against butachlor, indicating maintenance of resistance. However, in the simetryne treatment, the similar response was not observed in callus and seedling state, although there was a great different response among plant materials against simetryne. Rice variety which exhibited resistance in callus and seedling states showed low succinate dehydrogenase inhibition index. Succinate dehydrogenase inhibition index can be used as an important marker characters to differentiate varietal response of plant to herbicide. Rice plant was differentiated from butachlor and simetryne tolerant callus treated at $2.5{\times}10^{-5}$ M is growing under the growth chamber and can be used for resistant source.

• Journal of Korean Society of Forest Science
• /
• v.31 no.1
• /
• pp.1-7
• /
• 1976

When haploid plant would be appeared by the anther culture, the large quantity of young plant multiplied maternal inheritance and the same pure line rapidly in the short length of time, which will be effected to cut down much expences efforts and time for the production of seeds or seedlings. Therefore, the development of the technique for this would be much profited in the country industry. In the late of a few years studies were early attempted in this field, but up this time there were a few success of plants only and none of perennial plant. In this status of the country condition required earnestly for the development of the green industry, this researcher attempted to culture the anther of late uninucleate microspore or early binucleate microspore of the Prunus mume and other three psecies, economic trees estimated specially economic, on the place of Modified Murashige and Skoog's medium supliment with Kinetine, 2.4-D, and N.A.A for inducing haploid plants. The obtained results were as follows: 1. 2,000 anthers were cultured and there were shown that 2N callus in Prunus mume had 82 as 4.1%, 2N callus in Prunus tomentosa 15 as 0.8%, 2 N callus in Prunus salisina 75 as 4% 2. N callus had shown 40 as 2% from Prunus armeniaca var. ansu only, and the other trees showed all 2N callus. 3. Callus had appeared in every tree but 2N callus appeared was all filaments and there showed from only connective tissue N callus appeared was all from anther locule inside. 4. Then Prunus armeniaca var. ansu only was not callus of somatic anther tissue origin, but as there was callus origined from microspore which was changed in to swollen microspores or polynucleate microspores, it was certained to need haploid plant.

• Journal of Plant Biotechnology
• /
• v.38 no.3
• /
• pp.221-227
• /
• 2011

This study was carried out to determine optimal medium conditions for mass propagation by bioreactor culture of ever-bearing strawberry (Fragaria ${\times}$ ananassa D.). Two different type of nitride were that mixed $NH_4NO_3$ and $KNO_3$ or added $KNO_3$ only. And nitride concentrations were at the 4 levels of $1/2{\times}$, $1{\times}$, $2{\times}$ and $3{\times}$ that was included $NH_4NO_3$ and $KNO_3$. Sucrose content ranged at 3 levels of $10g{\cdot}L^{-1}$, $20g{\cdot}L^{-1}$ and $30g{\cdot}L^{-1}$ and medium pH were at the 3 levels of 4.6, 5.6 and 6.6. In bioreactor culture, medium that are included $NH_4NO_3$ and $KNO_3$ together in MS medium was suitable for mass propagation. Medium EC rose rapidly when the nitride concentration was increased. For that reason, plantlet growth was inhibited. Shoots of nitride $1/2{\times}$ concentration was 10.8 ea and $1/2{\times}$ concentration was suitable for shoot propagation. Fresh weight of sucrose $30g{\cdot}L^{-1}$ was 3,101 mg which was heaviest and aerial and ground part were higher than the other concentration. Shoots were increased in proportion to the increasing concentration of sucrose. In the pH condition, from pH 5.6 to 6.8 were appropriate for the optimum growth of aerial and ground part of plant. From the results, in bioreactor culture for mass propagation, MS medium was suitable $1/2{\times}$ concentration that was included $NH_4NO_3$ and $KNO_3$ together, and added $30g{\cdot}L^{-1}$ of sucrose, and then adjusted pH between 5.6 and 6.6.

• Journal of Broadcast Engineering
• /
• v.11 no.1 s.30
• /
• pp.80-90
• /
• 2006

A simple 2D gaze tracking method using single camera and Purkinje image is proposed. This method employs single camera with infrared filter to capture one eye and two infrared light sources to make reflection points for estimating corresponding gaze point on the screen from user's eyes. Single camera, infrared light sources and user's head can be slightly moved. Thus, it renders simple and flexible system without using any inconvenient fixed equipments or assuming fixed head. The system also includes a simple and accurate personal calibration procedure. Before using the system, each user only has to stare at two target points for a few seconds so that the system can initiate user's individual factors of estimating algorithm. The proposed system has been developed to work in real-time providing over 10 frames per second with XGA $(1024{\times}768)$ resolution. The test results of nine objects of three subjects show that the system is achieving an average estimation error less than I degree.

• Journal of Korea Game Society
• /
• v.11 no.4
• /
• pp.15-26
• /
• 2011

Game level design is a collaborative work to create a virtual world for a computer game including maps, agents, monsters, objects, players and events based on predefined its game scenario. It is a promising collaborative design application. The game level design generally requires much time and cost, as the size of its target game space becomes huge. However, traditional game level design tools do not provide concurrency control mechanisms among multiple participating game designers. They do not provide consistency of undo and redo mechanisms for erroneous collaborative tasks during iterative modifications and updates of collaborative tasks among multiple designers. In this paper, we propose a concurrency control and a collaborative editing mechanism to enhance productivity of the collaborative game level design. The proposed system provides hierarchical structures of shared objects and a concurrency control mechanism for each object. The proposed system also provides a consistent undo and redo mechanism to enhance modifications and updates on intermediate results of the level design procedures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.26-35
• /
• 2006

In this paper, an automatic mobile robot system for a intelligent path planning using the detection scheme of the spatial coordinates based on stereo camera is proposed. In the proposed system, face area of a moving person is detected from a left image among the stereo image pairs by using the YCbCr color model and its center coordinates are computed by using the centroid method and then using these data, the stereo camera embedded on the mobile robot can be controlled for tracking the moving target in real-time. Moreover, using the disparity map obtained from the left and right images captured by the tracking-controlled stereo camera system and the perspective transformation between a 3-D scene and an image plane, depth information can be detected. Finally, based-on the analysis of these calculated coordinates, a mobile robot system is derived as a intelligent path planning and a estimation. From some experiments on robot driving with 240 frames of the stereo images, it is analyzed that error ratio between the calculated and measured values of the distance between the mobile robot and the objects, and relative distance between the other objects is found to be very low value of $2.19\%$ and $1.52\%$ on average, respectably.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.598-603
• /
• 2019

Three-dimensional shape measurement technology is used in various industries. Among them, optical three-dimensional shape measurement techniques based on the optical trigonometry are mainly used in the field of semiconductor product inspection, where large quantities of three-dimensional shape measurements are made daily in factories and fine measurements are also required. The light source and the drive circuit, which are components of three-dimensional measurement equipment based on this optical trigonometry, produce heat generated by prolonged operation, and may be exposed to conditions where the ambient temperature is not constant, resulting in temperature-induced measurement errors. In this study, the compensation method of the Thermal Errors for Phase Measuring Profilometry is proposed. Three-Dimensional Shape Measurement Equipment based on Phase Measuring Profilometry is implemented to measure the height of an object and ambient temperature for 10 Hours, and a regression line was obtained line by making simple linear regression using measured temperature and height values. This regression line was used to correct the error of the height measurement according to the temperature, and thermal error was from 139.88 um(Micrometer) to 13.12 um.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.1
• /
• pp.37-44
• /
• 2019

A bond-based peridynamic model has been reported dynamic fracture characteristic of brittle materials through a simple constitutive model. In the model, each bond is assumed to be a simple spring operating independently. As a result, this simple bond interaction modeling restricts the material behavior having a fixed Poisson's ratio of 1/4 and not being capable of expressing shear deformation. We consider a state-based peridynamics as a generalized peridynamic model. Constitutive models in the state-based peridynamics are corresponding to those in continuum theory. In state-based peridynamics, thus, the response of a material particle depends collectively on deformation of all bonds connected to other particles. So, a state-based peridynamic theory can represent the volume and shear changes of the material. In this paper, the perfect plasticity is considered to express plastic deformation of material by the state-based peridynamic constitutive model with perfect plastic flow rule. The elastic-plastic behavior of the material is verified through the stress-strain curves of the flat plate example. Furthermore, we simulate the high-speed impact on 3D granite model with a nonlocal contact modeling. It is observed that the damage patterns obtained by peridynamics are similar to experimental observations.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.3
• /
• pp.211-220
• /
• 1999

The corn is mostly planted in mid-April in single-cropping silage system if possible, however, in a double-cropping silage system, the corn planting date is delayed until after the mid-May. The objective of this study was to evaluate agronomic characteristics and forage performance of the eight government recommended corn hybrids for silage at two dates of planting. Split-plot design replicated three times was used, that is, main plots were planting dates, sub-plots were eight hybrids at Suweon in 1997. Days from planting to silking of optimum planting was 84 days and that of late was 69 days. The difference in silking day among the hybrids was 6 days at optimum planting and 2 days at late planting. Plant height of optimum planting corn was higher than that of late one, however, ear height and stem diameter of optimum planting were lower than those of late planting corn. Among the corn hybrids tested, plant heights of 'P3156' and 'P3163' were higher than those of the other hybrids. Ear height of 'DK713' was the lowest among the corn hybrids and stem diameter of 'P3394' was thicker than that of the other hybrids. European corn borer(ECB) damage(16.6%) at optimum planting was lower than that(49.9%) of late, however, there were no significant ECB damage differences among the corn hybrids tested. Whole plant dry matter(DM) contents of 'P3525', 'P3394' and 'P3352' hybrids were higher than those of the other corn hybrids at harvest. Ear percentages of the total dry matter(DM) of 'P3394' and 'P3156' were higher than those of the other corn hybrids. Dry matter(DM) and total digestible nutrients(TDN) yields(19,696 and 14,621kg/ha) at optimum planting were higher than those (17,163 and 12,570kg/ha) of late planting, while there were no significant differences in DM and TDN yields among the corn hybrids tested. And those hybrids with greater proportion of grain in the whole plant have higher DM and TDN yields. Correlation coefficients for days from planting to silking with DM and TDN yields were $0.84^{**}$ and $0.87^{**}$, and those for ear percent were $0.86^{**}$ and $0.87^{**}$. Results of this study indicate that optimum planting date(15 April) is better than late planting date(16 May) in agronomic characteristics and forage production of silage corn. Days from planting to silking and ear percent as welI as other characters are important factors screening the corn hybrid for silage.

• The Korean Journal of Vision Science
• /
• v.20 no.4
• /
• pp.469-482
• /
• 2018

Purpose : We investigated the change of spherical and comma aberrations after wearing aspheric soft contact lens (ASCL) in young myopes. Methods : Fifty young myopes ($23.15{\pm}1.70years$, spherical equivalent: $-2.90{\pm}1.75D$) were recruited and refractive errors were corrected using ASCL (Biotrue, Bausch+Lomb, USA). High order aberrations were measured in the 4 mm pupil size using the wavefront analyze and pupil sizes were measured with a pupillometer at the modes of scotopic condition (light off) at 3.5 m in the 100 lx illuminance condition. Results : Spherical aberrations and coma aberration of the 20s myopes were $0.026{\pm}0.031{\mu}m$ and $0.078{\pm}0.039{\mu}m$ respectively, and $0.019{\pm}0.026{\mu}m$ and $0.082{\pm}0.038{\mu}m$ after ASCL wear that spherical aberration was decreased and coma aberration was increased. However, spherical aberration was decreased in the 68% of the subject have positive spherical aberration, and increased in the 11% of the subject have negative spherical aberration. Coma aberration was increased in the 53% of the subject, did not change in the 19% of the subjects, and decreased in the 28% of the subject. Spherical aberration was not different with the refractive errors in low and moderate myopies, however, coma aberrations was higher in the higher myopes. Conclusion : In a scotopic condition without accommodation stimuli, spherical aberration is decreased after wearing ASCL, however in the subject have negative spherical aberration spherical aberration could be increased, and which is thought to be the influence of contact lens design and pupil size.