• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.296-300
• /
• 2009

가상현실이나 인터넷 웹지도 서비스와 같이 3차원의 실세계를 시스템 상에 그대로 재현(reconstruction)하기 위해서는 정교하고 세밀한 3차원 도시모델이 필수적이다. 이러한 3차원 도시모델의 자동생성은 원격탐사 및 사진측량 분야에서 많은 연구가 수행되고 있다. 이러한 연구들은 다양한 센서 데이터와 기 구축되어 있는 GIS자료를 이용하여 건물, 도로, 지형 등의 도시모델을 자동으로 생성하고자 한다. 그러나 대부분의 연구에서 추출한 각 기본요소(primitives)-평면패치(planar patches), 에지(edges), 모서리(corners)에 대한 국부적인 정제(refinement)는 수행하였으나, 생성한 건물 모델에 대한 광역적인 조정을 통한 정규화에 대한 연구는 미비한 상태이다. 본 연구에서는 다양한 데이터로부터 생성된 B-rep (boundary representation) 형태의 건물 모델에 대하여 기하학적인 제약요소(constraints)를 이용한 정규화(regularization) 방법론을 제시하고자 한다. 제안하는 방법은 건물의 Domain Knowledge에 기반하여 도출한 건물을 구성하는 기본요소(primitives)간의 인접성, 직교성, 평행성, 교차성 등의 다양한 제약조건을 이용하여 광역적으로 조정한다. 시뮬레이션 데이터에 적용한 결과의 분석을 통해 제안된 정규화 방법을 통해 오차가 포함된 건물모델이 보다 정형화된 형태로 조정되었음을 확인하였다.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.427-439
• /
• 2019

Purpose: We generated geospatial information of unmanned aerial vehicle based on various SW and analyzed the location accuracy of orthoimage and DSM and texture mapping of 3D mesh. Method: The same unmanned aerial image data is processed using two different SW, and spatial information is generated. Among the generated spatial information, the orthoimage and DSM were compared with the spatial information generation results of the unmanned aerial photogrammetry SW by performing quantitative analysis by calculating RMSE of horizontal position and vertical position error and performing qualitative analysis. Results: There were no significant differences in the positional accuracy of the orthoimage and DSM generated by each SW, and differences in texture mapping in 3D mesh. The creation of the 3D mesh indicated the impact of the Unmanned Aerial Photogrammetry SW. Conclusion: It is shown that there is no effect of SW on the creation of orthoimage and DSM for geospatial analysis based on unmanned aerial vehicle. However, when 3D visualization is performed, texture mapping results are different depending on SW.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10B
• /
• pp.1076-1085
• /
• 2009

In this paper, a new method for efficient computation of CGH patterns for 3-D video images is proposed by combined use of temporal redundancy and look-up table techniques. In the conventional N-LT method, fringe patterns for other object points on that image plane can be obtained by simply shifting these pre-calculated PFP (Principle Fringe Patterns). But there have been many practical limitations in real-time generation of 3-D video holograms because the computation time required for the generation of 3-D video holograms must be massively increased compared to that of the static holograms. On the other hand, as ordinary 3-D moving pictures have numerous similarities between video frames, called by temporal redundancy, and this redundancy is used to compress the video image. Therefore, in this paper, we proposed the efficient hologram generation method using the temporal redundancy of 3-D video image and N-LT method. To confirm the feasibility of the proposed method, some experiments with test 3-D videos are carried out, and the results are comparatively discussed with the conventional methods in terms of the number of object points and computation time.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.487-490
• /
• 2002

이미지를 기반으로 3차원 모델을 생성하기 위한 방법은 많은 사람들의 연구의 대상이 되어 왔다. 본 연구에서는 연속적으로 획득된 여러 장의 이미지로부터 특징점을 추출한 후, 사영복원과 유클리디언 복원을 이용하여 특징점에 대응되는 3차원 데이터를 계산하는 방법을 구현하였고, 이렇게 얻은 3차원 데이터에 텍스쳐 매핑을 결합하여, 보다 사실적인 3차원 모델을 생성할 수 있는 시스템을 구현하였다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• fall
• /
• pp.45-48
• /
• 2021

본 논문은 RGB 컬러 3 채널에 대해 공유되는 홀로그램 픽셀 피치를 사용하여 3 차원 장면의 라이트 필드 데이터에서 비호겔 기반 컴퓨터 생성 홀로그램(CGH)을 합성하는 방법을 제안한다. 비호겔 기반 CGH 기술은 라이트 필드의 광선 각도를 평면 파면의 공간 주파수로 해석하여 주어진 라이트 필드 데이터에서 임의의 반송파로 연속 파면을 생성한다. 그러나 광선 각도와 공간 주파수 관계는 파장에 따라 달라지므로 라이트 필드 데이터에서 공간 주파수 샘플링 그리드가 달라져서 홀로그램 재구성에서 색 수차가 발생한다. 제안하는 방법은 가장 작은 청색 회절각이 라이트 필드의 시야를 커버하도록 모든 색상 채널에 공통적인 홀로그램 픽셀 피치를 설정한다. 그런 다음 라이트 필드를 파란색 파장의 공간 주파수 범위와 빨간색 파장의 샘플링 간격으로 보간하여 모든 색상 채널에 공통적인 공간 주파수 샘플링 그리드를 설정한다. 공통 홀로그램 픽셀 피치 및 라이트 필드 공간 주파수 샘플링 그리드는 홀로그램 재구성에서 색상 수차 또는 라이트 필드에 포함된 정보 손실 없이 컬러 홀로그램 합성을 보장한다. 제안된 방법은 다양한 테스트와 리얼 3D 장면의 컬러 라이트 필드 데이터를 사용하여 검증되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.8-16
• /
• 2016

This study presents the visualization of shape information based on Octree using 3D laser scanning. The process of visualization was established to construct the Octree structure from the 3D scan data. The scan data was converted to a 2D surface through the mesh technique and the surface was then converted to a 3D object through the Raster/Vector transformation. The 3D object was transmitted to the Octree Root Node and The shape information was constructed by the recursive partitioning of the Octree Root Node. The test-bed was selected as the steel bridge structure in Sungkyunkwan University. The shape information based on Octree was condensed into 89.3%. In addition, the Octree compressibility was confirmed to compare the shape information of the office building, a computer science campus in Germany and a New College in USA. The basis is created by the visualization of shape information for double-deck tunnel and it will be expected to improve the efficiency of structural health monitoring and maintenance.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.2
• /
• pp.165-173
• /
• 2008

This study aims at generating automatically three dimensional geometric models of roads using LIDAR data and a digital map. The main processes in the proposed method are (1) generating a polygon encompassing a road region using a road layer from the digital map, (2) extracting LIDAR points within the road region using the polygon, (3) organizing the points into surface patches and grouping the patches into surface clusters, (4) searching the road surface clusters and generating the surface model from the points linked to the clusters, (5) refining the boundary using a digital map. By applying the proposed method to real data, we successfully generated the linear and surface information of the roads.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.816-821
• /
• 2009

In this paper, I would like to talk about a step by step detailed information browsing which is founded on hierarchical structure for offering suitable information about the mass 3D data of a national treasure building to user as a standard of the visual distance. A step by step detailed information of the national treasure building of gigantic proportions offers a process of detailed information browsing which decided suitable hierarchical structure as considering of the preprocessing procedure which produces hierarchical structure and a visual distance of user. In the preprocessing procedure, 3D data is divided and controlled by optimized spacial structures. The relevance connection between the inner spacial surface is then examined and reconfigured in order to prevent holes or distortions. Finally, relative information data is created. In detailed information browsing, by examining the visual distance between model and user, then by browsing proper step of data, suitable level model data can be provided to the users in accordance with the position of observation.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.1
• /
• pp.87-93
• /
• 2013

As the progress regarding spatial analysis on features such as landscape, sunlight, shadow, and direct ray using 3D simulation, it is required to research the creation of 3D terrain models crucial for 3D simulations. In this paper, we suggested the methods to create the 3D terrain model for the state after development, by transfer the 2D plan to 3D terrain model using the normal equation. Automated algorithm producing 3D terrain model from 2D plan was developed. And It is expected to be needed more studies detailed.

• Spatial Information Research
• /
• v.22 no.2
• /
• pp.31-44
• /
• 2014

According to the purpose of applications, the application program will utilize the most suitable data model and 3D modeling data would be generated based on the selected data model. In these reasons, there are various data sets to represent the same geographical features. The duplicated data sets bring serious problems in system interoperability and data compatibility issues, as well in finance issues of geo-spatial information industries. In order to overcome the problems, this study proposes a spatial data fusion method using topological relationships among spatial objects in the feature classes, called Topological Relation Model (TRM). The TRM is a spatial data fusion method implemented in application-level, which means that the geometric data generated by two different data models are used directly without any data exchange or conversion processes in an application system to provide indoor LBSs. The topological relationships are defined and described by the basic concepts of IndoorGML. After describing the concepts of TRM, experimental implementations of the proposed data fusion method in 3D GIS are presented. In the final section, the limitations of this study and further research are summarized.