• Title/Summary/Keyword: 355nm

Search Result 190, Processing Time 0.023 seconds

Optimization of active layer for the fabrication of transparent thin film transistor based on ZnO (ZnO 기반의 투명 박막 트랜지스터 제작을 위한 Active-layer의 최적화에 대한 연구)

  • Chang, Seong-Pil;Lee, Sang-Gyu;Son, Chang-Wan;Leem, Jae-Hyeon;Song, Yong-Won;Ju, Byung-Kwon;Lee, Sang-Yeol
    • Proceedings of the KIEE Conference
    • /
    • 2007.11a
    • /
    • pp.94-95
    • /
    • 2007
  • We have observed electrical properties of ZnO thin films for the fabrication of transparent thin film transistor. ZnO thin films were deposited on $Al_2O_3$(0001) substrate at various temperatures by pulsed laser deposition(PLD). The third of harmonic(355nm) Nd:YAG laser was used for pulsed laser deposition. X-ray diffraction(XRD), field emission-scanning electron microscope(FE-SEM), and photoluminescence were used to characterize physical and optical properties of ZnO thin film.. The results indicated the ZnO film showed good optical properties as increasing temperatures, with low FWHM of exciton-related peak and XRD(0002) peak.

  • PDF

A Study on the Fabrication of Laser-Induced Graphene Humidity Sensor for Mounting on a Disposable Mask (일회용 마스크에 장착을 위한 레이저 기반 그래핀 습도센서 제작에 관한 연구)

  • Lee, Jun-Uk;Shin, Yun-Ji;Yang, Hye-Jeong;Shin, Bo-Sung
    • Journal of the Korean Society of Industry Convergence
    • /
    • v.23 no.4_2
    • /
    • pp.693-699
    • /
    • 2020
  • 355nm UV pulse laser is irradiated on the surface of polyimide (PI) by LDW (Laser Direct Writing) method to produce a high sensitivity flexible humidity sensor using a simple one-step process. The LDW method continuously investigates 2-D CAD data using a galvano scanner and an F-lens. This method is non-contact, so it minimizes physical strain on the PI. Laser-induced graphene (LIG) produced by lasers has a high surface area due to its high flexibility and numerous pores and oxidizers compared to conductors. For this reason, it is highly useful as a flexible humidity sensor. The humidity sensor produced in this study was attached to the inside of a mask filter, which has become a hot topic recently, and its applicability was confirmed.The measurement of humidity measured the sensitivity, reactivity, stability and recovery behavior of the sensor by measuring changes in capacitance and resistance.

Selective Emitter Formation of Borosilicate-Glass (BSG) Layer using UV Laser (UV Laser를 이용한 Borosilicate-Glass (BSG)층의 선택적 에미터 형성)

  • Kim, Ga Min;Chang, Hyo Sik
    • Korean Journal of Materials Research
    • /
    • v.31 no.12
    • /
    • pp.727-731
    • /
    • 2021
  • In this study, we have investigated a selective emitter using a UV laser on BBr3 diffusion doping layer. The selective emitter has two regions of high and low doping concentration alternatively and this structure can remove the disadvantages of homogeneous emitter doping. The selective emitters were fabricated by using UV laser of 355 nm on the homogeneous emitters which were formed on n-type Si by BBr3 diffusion in the furnace and the heavy boron doping regions were formed on the laser regions. In the optimized laser doping process, we are able to achieve a highly concentrated emitter with a surface resistance of up to 43 Ω/□ from 105 ± 6 Ω/□ borosilicate glass (BSG) layer on Si. In order to compare the characteristics and confirm the passivation effect, the annealing is performed after Al2O3 deposition using an ALD. After the annealing, the selective emitter shows a better effect than the high concentration doped emitter and a level equivalent to that of the low concentration doped emitter.

Application of nanoparticles in extending the life of oil and gas transmission pipeline

  • Yunye, Liu;Hai, Zhu;Jianfeng, Niu
    • Structural Engineering and Mechanics
    • /
    • v.84 no.6
    • /
    • pp.733-741
    • /
    • 2022
  • The amount of natural gas that is used on a worldwide scale is continuously going up. Natural gas and acidic components, such as hydrogen sulfide and carbon dioxide, cause significant corrosion damage to transmission lines and equipment in various quantities. One of the fundamental processes in natural gas processing is the separation of acid gases, among which the safety and environmental needs due to the high toxicity of hydrogen sulfide and also to prevent wear and corrosion of pipelines and gas transmission and distribution equipment, the necessity of sulfide separation Hydrogen is more essential than carbon dioxide and other compounds. Given this problem's significance, this endeavor aims to extend the lifespan of the transmission lines' pipes for gas and oil. Zinc oxide nanoparticles made from the environmentally friendly source of Allium scabriscapum have been employed to accomplish this crucial purpose. This is a simple, safe and cheap synthesis method compared to other methods, especially chemical methods. The formation of zinc oxide nanoparticles was shown by forming an absorption peak at a wavelength of about 355 nm using a spectrophotometric device and an X-ray diffraction pattern. The size and morphology of synthesized nanoparticles were determined by scanning and transmission electron microscope, and the range of size changes of nanoparticles was determined by dynamic light scattering device.

High Functional $GdB_2C_3O_{7-x}$ Thin Films Fabricated by Pulsed Laser Deposition

  • Song, S.H.;Ko, K.P.;Song, K.J.;Moon, S.H.;Yoo, S.I.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.8 no.4
    • /
    • pp.15-18
    • /
    • 2006
  • REBCO coated conductors (RE: rare earth elements) have recently drawn great attention since they are known to possess stronger flux pinning centers in high magnetic fields compared with YBCO coated conductors. In this study, $GdBa_2Cu_3O_{7-d}(GdBCO)$ was selected to investigate the influence of the distance between target and substrate and substrate temperature on the superconducting properties of GdBCO films on the $SrTiO_3(100)$ substrate. Samples were fabricated by pulsed laser deposition (PLD) with a Nd:YAG laser (355nm). Under a given oxygen pressure of 800mTorr, we changed the distance between target and substrate from 5.5cm to 7.0cm and the substrate temperature from $750^{\circ}C\;to\;850^{\circ}C$. The crystallinity and texture of GdBCO films were analyzed by X-ray diffraction (XRD), and the surface morphology was observed by the scanning electron microscopy (SEM). Tc and Jc values were measured by the four point probe method. High quality GdBCO films with Tc of 89.7K and Jc over $1MA/cm^2$ at 77 K in self field were successfully fabricated by optimizing processing parameters. The detailed processing conditions, microstructure and superconducting properties will be presented for a discussion.

Quantitative Analys is of Flavonoids in Hovenia dulcis by Region Using UPLC (UPLC를 이용한 지역별 헛개나무(Hovenia dulcis) 플라보노이드의 정량분석)

  • Dong Hwan Lee;Hyun-Jun Kim
    • Proceedings of the Plant Resources Society of Korea Conference
    • /
    • 2022.09a
    • /
    • pp.100-100
    • /
    • 2022
  • Hovenia dulcis is a herbal plant, which belongs to the Rhamnaceae family and is a native of Japan, China and Korea. Its fruit stalk is called 'Jiguja' in Korea. It has been traditionally used as a medicinal plant in East Asia. It was reported to have detoxification effects on alcohol poisoning, and antioxidant, antidiabetic etc. Sample of 5 g was extracted with 50 mL of 70% EtOH. The supernatant was filtered by 0.45 ㎛ membrane filter before analysis. The UPLC system was performed on Waters alliance UPLC HSS T3 column (2.1 × 100 mm, 1.7 ㎛) with a UV detector. The gradient system was a binary eluent of 0.1% formic acid in water(A) and 0.1% formic acid in acetonitrile(B) with gradient conditions as follows: Initial, 10% B; 1 min, 10% B; 4 min, 20% B; 10 min, 25% B; 12 min, 30% B; 14 min, 90% B; 17 min, 90% B; flow rate of 0.2 mL/min. The samples were injected by 2 µL and were detected at UV 355 nm. As a result of analysis, chromatographic patterns appeared in two cases: samples analyzed for ampelopsin and myricetin, and samples analyzed for taxifolin and quercetin. Among the four compounds, the largest regional difference was found to be taxifolin.

  • PDF

A Fundamental Study of Eu2+ Luminescence in Aluminum Borate Compounds (Aluminum Borate 화합물에 있어서 EU2+이온의 발광성)

  • Chang, Ki-Seog
    • Journal of the Korean Chemical Society
    • /
    • v.44 no.4
    • /
    • pp.350-355
    • /
    • 2000
  • The compounds, CaAl$_2$(BO$_3$)$_2$O, SrAl$_2$(BO$_3$)$_2$O and BaAl$_2$(BO$_3$)$_2$O, are good host lattices for highly efficient $Eu^{2+}$ luminescence. The europium emission peaks at 450 nm in $Eu^{2+}$:CaAl$_2$(B0$_3$)$_2$O, 411 nm in $Eu^{2+}$: SrAl$_2$(BO$_3$)$_2$O and 375 nm in $Eu^{2+}$: BaAl$_2$(BO$_3$)$_2$O. The $Eu^{2+}$: CaAl$_2$(BO$_3$)$_2$O Phosphor shows a high output and should be a good maintenance in VUV Xe lamps. It is ideally suited for use in PDP phosphors. The $Eu^{2+}$ ion is interesting because the Stokes shift emission is a strong host dependent. The difference in the Stokes shift is oneimportant factor leadingto a difference in wavelength. If the 5d level of $Eu^{2+}$ ion is lower in energy,according to a decrease in the doping lattice size, then the emission wavelength will be longer and the Stokes shift will be smaller. Therefore, a knowledge of the relationship between the crystal lattice size and the Stokes shift. (orthe energy of the 5d level),is essential for beingable to predict $Eu^{2+}$ emission properties.

  • PDF

A Case Study for Deterioration due to Alkali-Silica Reaction in the Cement Concrete Pavement (알칼리-실리카 반응에 의한 시멘트 콘크리트 포장 파손 사례)

  • Hong, Seung-Ho;Han, Seung-Hwan;Yun, Kyong-Ku
    • Journal of the Korea Concrete Institute
    • /
    • v.18 no.3 s.93
    • /
    • pp.355-360
    • /
    • 2006
  • The Alkali-Silica Reaction(ASR) may cause a serious failure in the concrete pavements and structures. Several researches in some nations have conducted the continuous studies to prevent failure of the concrete structures by the ASR distress as well as the studies to manifest the mechanism. The researches on the ASR have not been performed affluently in Korea because the distress due to ASR has seldom been reported literarily. In this study, we tried to set up the systematic scheme practically for verifying the cause of distress due to ASR by using the visual inspections in field, the chemical method, petrographic analysis, and Electron Dispersive X-ray Spectrometer(EDX) method of Scanning Electron Microscopy(SEM) in laboratory. The chemical method, petrographic method using SEM, and X-ray method were used to verify the cause of pattern crack on the surface and internal crack in the plain concrete pavement. It can be concluded that the distress of a specific site in plain concrete pavement was mainly due to ASR. The chemical method, the petrographic method and EDX method using SEM may be the effective tools for verifying the cause of AAR distresses.

성스테로이드 호르몬과 해산 태생 경골어류의 성분화

  • Gwon, Jun-Yeong;Han, Hyeong-Gyun;Im, Han-Gyu;Kim, Dae-Jung;Lee, Chan-Hui;Gwon, Hyeok-Chu
    • Proceedings of the Korean Aquaculture Society Conference
    • /
    • 2004.05a
    • /
    • pp.355-355
    • /
    • 2004
  • 난생 경골어류의 성분화는 내인성 및 외인성 성스테로이드 호르몬의 영향을 받는 것으로 알려져 있지만, 해산 태생 경골어류의 성분화 과정에서 성스테로이드 호르몬의 작용은 아직 명확하게 밝혀져 있지 않다. 본 연구에서는 유용 양식어종의 하나인 해산 태생어류 조피볼락 Sebastes schlegeli를 대상으로 이 종의 성분화에 미치는 성스테로이드 호르몬의 영향을 조사하였다. 실험에 사용한 조피볼락은 출산후 일령 45일 전후의 성이 미분화한 개체들이었다. 실험어는 3개 실험군으로 나누어 (각각 3반복), 1개월간 각각 estradiol-l7${\beta}$ 또는 methyltestosterone을 처리하였고, 하나의 실험군은 호르몬 처리를 하지 않았다 처리기간 동안에는 각 실험군으로부터 무작위 sampling을 실시하여, 호르몬 처리에 따른 체내 성스테로이드 호르몬 변화를 조사하였으며, 각 실험군의생식소 분화과정을 조직학적으로 조사하였다. 성스테로이드 호르몬은 diethylether로 추출한후, rndioirmmunoassay 방법 (RIA)으로 분석하였다. 실험결과 대조구의 실험어는 1:1의 자연성비에 부합하는 성분화 결과를 나타내었지만, estradiol-17${\beta}$ 처리구는 자성화, methyltestosterone 처리구는 웅성화하는 경향을 나타내었으며, 이러한 성분화 shift는 외부에서 투여한 호르몬이 실재 내부호르몬양의 변화를 초래하여 이루어졌음이 RIA 분석에 의해 부분적으로 확인되었다. 본 연구의 결과는 해산 태생 경골어류의 성분화 역시 성스테로이 드호르몬의 작용에 의하여 매개 또는 조절되어진다는 사실을 제시한다. 하지만 태생어류에서 이 호르몬의 실질적 작용 메카니즘 및 명확한 작용시기에 대해서는 보다 많은 연구가 요구되어 진다.을 설계하는 것이 가능하였다.적(最適) 온도(溫度)는 $30^{\circ}C$, avicelase와 ${\beta}-glucosidase$의 최적(最適) pH는 5.0, CMCase는 pH 5.5 이었으며, 균사(菌絲) 생육(生育)은 pH 5.0에서 양호(良好)하였다. 배양(培養) 기간(期間)은 avicelase가 8일(日), CMCase가 10일(日), ${\beta}-glucosidase$는 16 일간(日間) 배양(培養)하였을 때 최대치(最大値)를 보였고, 균사(菌絲) 생육(生育)은 12일(日) 배양(培養)했을 때 가장 양호(良好)하였다.가한 반면, 중국인들은 고소한 향의 강도, 고소한 향의 기호도, 전체적인 맛에서 뚜렷하게 일본참기름을 우수하게 평가하였다.s의 항체(抗體)로 반응(反應)시킨 후 protein-A gold(15 nm)로 표식(標識)시킨 바 제일 바깥 상층(上層)의 keratinocyte에 있어서 세포막표면(細胞膜表面)을 따라 표식(標識)되어 세포막항원(細胞膜抗元)을 나타내었으며, 이와 같은 소견(所見)으로 미루어 정상피부(正常皮膚) 중층편평상피세포(重層扁平上皮細胞)에서도 동일(同一)한 소견(所見)을 관찰(觀察)할 수 있다고 본다.al remnants, Resorption of fetus로 관찰된 것이다. Fetal death는 수정후 $14{\sim}18$일까지의 사망으로써 Maceration of fetus로 관찰되는 것이다. 통계학적 분석은 각 Group의 착상 을과 자궁 내 사망 율을 산출할 때에는 각 임신마우스에 따라 발생빈도가 크게 다르기 때문에 통계처리에는 Non parametric 검정인 Kluskal Wallis 검정을 사용하여 분석하였다. 또한 개체 Level 영향인 착상을, 태아사망,

  • PDF

Monitoring of antioxidant activities with dried Gugija (Lycium chinensis Mill) extraction (건조 구기자의 추출에 따른 항산화 효능 모니터링)

  • Lee, Gee-Dong
    • Food Science and Preservation
    • /
    • v.23 no.6
    • /
    • pp.859-865
    • /
    • 2016
  • Thise study aimed to determine the optimum antioxidant extraction conditions of dried Gugija (Lycium chinensis Mill). To determine the operational parameters, including ethanol concentration ($X_1$, 0~80%) and extraction time ($X_2$, 1~5 hr), a response surface methodology was applied to monitor brown color intensity, total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity. Coefficients of determinations ($R^2$) of the models were 0.8486~0.9214 (p<0.05~0.1) in dependent parameters. Brown color intensity of Gugija extracts reached a maximum of 0.75 (OD in 420 nm) under extraction conditions of 2.88 hr in 78.10% ethanol. Total phenolic compounds reached a maximum of $2,355{\mu}g$ under extraction conditions of 4.94 hr in 30.17% ethanol. ABTS radical scavenging activity was 13.83% at 4.61 hr and 16.21% ethanol. $Fe^{2+}$ chelating activity showed a maximum of 58.54% under extraction conditions of 3.39 hr in 0.76% ethanol. Optimum extraction conditions (5 hr extraction in 15% ethanol) were obtained by superimposing the contour maps with regards to total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity of dried Gugija. Maximum values of total phenolic compounds, ABTS radical scavenging activity, and $Fe^{2+}$ chelating activity under optimum extraction condition were $2,397{\mu}g$, 15.62% and 54.78%, respectively.