• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.4
• /
• pp.383-388
• /
• 2012

The aim of this study was to compare the compressive strength and the surface microhardness of Beautifil flow (Shofu, Kyoto, Japan) with $Filtek^{TM}$ Z350, Z350XT (3M ESPE, USA). Fifteen specimens from each material were fabricated for testing. Compressive strength was measured by using a universal testing machine at a crosshead speed of 1 mm/min. Surface microhardness values were measured by using Vickers hardness tester under 4.9 N load and 10 seconds dwelling time. The compressive strength of Group 2 $Filtek^{TM}$ Z350XT shows the highest value as $218.7{\pm}18.4$ MPa and Group 1 $Filtek^{TM}$ Z350 was $205.5{\pm}27.1$ MPa. Group 3 Beautifil flow F00 was $176.5{\pm}30.3$ MPa, and Group 4 Beautifil flow F10 was $173.4{\pm}26.2$ MPa. The compressive strength of Group 2 is higher than Group 3 and 4 (p < 0.05). The surface microhardness of Group 2 $Filtek^{TM}$ Z350XT shows the highest value as $39.1{\pm}2.1$ and Group 4 Beautifil flow F10 was $27.9{\pm}1.8$. And Group 3 Beautifil flow F00 was $23.1{\pm}1.1$, Group 1 $Filtek^{TM}$ Z350 was $20.4{\pm}0.9$. There was a statistical significant difference in surface microhardness between all groups (p < 0.05). In conclusion, the compressive strength of giomer was below the level of flowable composite resin. However, the surface microhardness of giomer is comparable to that of flowable composite resin. Giomer would be the good alternative to composite resin, if there is improvement of the compressive strength of giomer.

• Journal of Korean Society of Forest Science
• /
• v.106 no.2
• /
• pp.219-229
• /
• 2017

Forest road is an essential infrastructure for forest management such as the composition and management of forest resources, timber and forest byproduct production & transportation. It has recently been utilized forest recreation and forest sports as well as also forest pest control, forest fire prevention and evolution. When you build a forest road, the economic function in the forest is activated, so that it can result in the ripple effect of induced employment, value-added creation and production inducement. The purpose of this study is to analyze the impact caused by forest road construction occurring as the overall economy. For analysis it was applied to inter industry analysis method that is a method for analyzing the quantitative cross-correlation. The data were used in the Input-Output Tables In 2014, the Bank of Korea. When you build a forest road, economic effect due to the construction of the forest road is generated and economic effects are also generated due to the increase in the production of forest products after the construction of the forest road. Therefore, we will analyze the economic impact of the two effects. The estimated economic value of forest products, which is the economic effect of forest product cultivation, was calculated through some assumptions and the economic ripple effect was analyzed. The forest road construction sector is defined as land clearing and reclamation, and irrigation project construction and the forestry forest products sector is defined as the sum of raw timber, edible forest products and misc. forest products. In total, 32 sectors were classified, and except for the two sectors defined as forest road construction and forestry forest products, the remaining sectors were integrated according to the classification system of 30 integrated classifications of the Bank of Korea. As a result, the production inducement coefficient for forest construction was analyzed to be 2.767 and the production inducement coefficient for forestry forest products was analyzed to be 1.565. This means that 2,767 times the production of forest road construction investment is induced in the whole industry and the production of 1.562 times the amount of forestry forest products is caused by the whole industry as the production of forestry forest products increases. The value added inducement coefficient for forest road construction was 0.977 and the value added inducement coefficient for forestry forest products was 0.985. Forest road are essential infrastructure for forestry development and should be continuously invested because they are essential elements of timber production and forest byproduct production with functions such as forest management, forest recreation, forest sports, and town connection.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.9
• /
• pp.1097-1105
• /
• 2017

This study examined how much chicken meat was in sausage made with pork. Both real-time polymerase chain reaction (PCR) and internal standard addition were used. Fifty ng of chicken DNA was added to the sausages as an internal standard. The addition of standard DNA increased the amplification efficiency of PCR and confirmed the possibility of quantitative analysis. A QIAamp DNA Micro Kit was used to improve the DNA recovery and amplification efficiency. The density of template DNA and primer were suitable for $3.0{\sim}5.0{\mu}L$ and $0.5{\mu}L$, respectively. Each DNA of pig and chicken was diluted in 10-fold from steps 50 ng to 0.05 ng. The detection limit of both pig and chicken meat was more than 0.05 ng and the correlation coefficient of the standard curve was at least 0.98. The result of the quantitative analysis after heat treatment of 3 samples of pigs and chickens mixed at 70:30 showed a 5.7% difference (64.3:35.7) between the expected value and measured value. The quantitative value was changed by affecting the DNA according to the heat treatment ($70^{\circ}C$, 10 min). An analysis of the pork and chicken content in sausages showed that it was difficult to detect chicken meat and the quantitative value of DNA according to the Ct value was very low. On the other hand, when adding standard material (50 ng of chicken DNA) to the sausages, the Ct value decreased gradually with increasing chicken mixing ratio. Thus, the mixing ratio of chicken in sausages could be estimated.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.4
• /
• pp.500-508
• /
• 2016

This study was conducted to investigate the effects of Momordica charantia saponin (MCS) on ruminal fermentation of maize stover and abundance of selected microbial populations in vitro. Five levels of MCS supplements (0, 0.01, 0.06, 0.30, 0.60 mg/mL) were tested. The pH, $NH_3-N$, and volatile fatty acid were measured at 6, 24, 48 h of in vitro mixed incubation fluids, whilst the selected microbial populations were determined at 6 and 24 h. The high dose of MCS increased the initial fractional rate of degradation at t-value = 0 ($FRD_0$) and the fractional rate of gas production (k), but decreased the theoretical maximum of gas production ($V_F$) and the half-life ($t_{0.5}$) compared with the control. The $NH_3-N$ concentration reached the lowest concentration with 0.01 mg MCS/mL at 6 h. The MSC inclusion increased (p<0.001) the molar proportion of butyrate, isovalerate at 24 h and 48 h, and the molar proportion of acetate at 24 h, but then decreased (p<0.05) them at 48 h. The molar proportion of valerate was increased (p<0.05) at 24 h. The acetate to propionate ratio (A/P; linear, p<0.01) was increased at 24 h, but reached the least value at the level of 0.30 mg/mL MCS. The MCS inclusion decreased (p<0.05) the molar proportion of propionate at 24 h and then increased it at 48 h. The concentration of total volatile fatty acid was decreased (p<0.001) at 24 h, but reached the greatest concentration at the level of 0.01 mg/mL and the least concentration at the level of 0.60 mg/mL. The relative abundance of Ruminococcus albus was increased at 6 h and 24 h, and the relative abundance of Fibrobacter succinogenes was the lowest (p<0.05) at 0.60 mg/mL at 6 h and 24 h. The relative abundance of Butyrivibrio fibrisolvens and fungus reached the greatest value (p<0.05) at low doses of MCS inclusion and the least value (p<0.05) at 0.60 mg/mL at 24 h. The present results demonstrates that a high level of MCS quickly inhibits in vitro fermentation of maize stover, while MCS at low doses has the ability to modulate the ruminal fermentation pattern by regulating the number of functional rumen microbes including cellulolytic bacteria and fungi populations, and may have potential as a feed additive applied in the diets of ruminants.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.4
• /
• pp.463-469
• /
• 2015

Purpose: A hydrogel including alginate and $CaCl_2$ extracted from seaweed was manufactured, and their physical properties were investigated. Also, its applicability as contact lenses was examined. Methods: A film-type sample used in this experiment was manufactured using 2-hydroxyethyl methacrylate (HEMA), which is the raw material of hydrogel contact lenses; azobisiobutyonitile (AIBN), which is an initiator and ethylenglycoldimethacrylate (EGDMA), which is a cross-linking agent. It was hydrated in a PBS solution for 24 hours, and an interpenetrating polymer network (IPN) was formed in 1% and 2% alginate and 1%, 3%, and 5% $CaCl_2$ solutions for 24 hours, respectively. Results: The measurement of the physical properties of the film after the IPN showed that the moisture content was 30.89~36.89%, the refractive index was 1.431~1.441, the contact angle was $62.98{\sim}80.45^{\circ}$, and the tensile strength was 2.378~4.215 ($gf/mm^2$). Also, the physical properties hardly changed as the content of alginate increased, and the moisture content decreased as the content of $CaCl_2$ increased. As a result of the IPN, the moisture content and contact angle decreased compared to those of basic HEMA, but the tensile strength increased. The tensile strength of the second IPN was higher than that of the first IPN. In the case of $CaCl_2$, for the sample polymerized for 24 hours and the second IPN sample with 2% alginate, the contact angle decreased as the content of $CaCl_2$ increased. Conclusions: In this study, the tensile strength increased as the content of $CaCl_2$ increased, and the wettability increased as a result of IPN of alginate and $CaCl_2$. The hydrogel containing the alginate and $CaCl_2$ was confirmed possible utilization as contact lens material.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.127-138
• /
• 2013

This study investigated the effects of feeding the broilers that are exposed to extreme heat stress (EHS, $33{\pm}2^{\circ}C$) with extreme heat stress diet (EHSD) containing adequate amount of soy oil and other nutrients on their growth performance. 500 broiler chickens (Ross 308) were randomized into five dietary treatment groups according to a randomized block design on the day they were hatched. Each group was further divided into four repeat pens with each repeat pen comprising 25 chickens. The five dietary treatment groups were: T1 (Normal ambient condition + basal diet (BD), T2 (EHS +BCD), T3 (EHS + extreme heat stress diet (EHSD) prepared from BD with tallow replaced with soy oil and containing molasses 2%), T4 (EHS + EHSD prepared from BD with tallow replaced with soy oil and containing molasses 2% and methionine and lysine of 1.5 times greater quantities than in BD), and T5 (EHS + EHSD prepared from BD with tallow replaced with soy oil and containing molasses 2%, methionine and lysine of 1.5 times greater quantities than in BD, and vitamin C 200 ppm) with inverse lighting. The body weight gain of the broilers increased significantly in T4 and T5 as compared with that in T1 and T2. Weights of the lymphoid organ, bursa of Fabricius, thymus, and spleen were similar between all groups. Serum concentrations of IgG, IgG and IgM were higher in T4 and T5 than inT1 and T2, but the corticosterone concentration decreased significantly in them. In T4 and T5, Lactobacillus in the cecum increased, but Escherichia, coliform, and total aerobic bacteria decreased rather significantly, compared with those in T1 and T2. Contents of acetic acid, propionic acid and total SCFA were significantly higher in T4 and T5 than in T1 and T2.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.78-87
• /
• 2013

In this study, the effect of extreme heat diet on growth performance, lymphoid organ, blood immunoglobulin and cecum microflora change in broilers exposed to continuous lighting and extreme heat stress (EHS) was studied. Broilers raised under normal environment temperature ($25^{\circ}C$ or extreme heat stress temperature ($33{\pm}2^{\circ}C$, and consumed chow diet (CD) or extreme heat stress diet (EHSD). Five hundred Ross 308 day-old commercial broilers were arranged in a completely randomized block design of 5 treatment groups with 4 repetitions (25 heads per repetition pen). The broilers were divided into: T1 (normal environment+CD), T2 (EHS+CD), T3 (EHS+EHSD in which the tallow in CD was substituted by soy oil and contained 5% molasses), T4 (EHS+EHSD in which the tallow in CD was substituted by soy oil and contained 5% molasses, and 1.5 times more methionine and lysine than CD), and T5 (EHS+EHSD in which the tallow in CD was substituted by soy oil, contained 5% molasses, 1.5 times more methionine and lysine than CD, and 300ppm of vitamin C). The EHS significantly reduced the body weight gain and feed intake. The blood immunoglobulin, bursa of Fabricius, thymus, and spleen weight were significantly reduced when broilers were exposed to EHS. Compared to the normal environment temperature group, the cecum Lactobacillus sp. was low in the EHS treatment group, while Escherichia sp., Salmonella sp. and total aerobic bacteria in the EHS treatment group were high. A statistically significant difference was acknowledged between the treatment groups.

• Clinical and Experimental Pediatrics
• /
• v.51 no.8
• /
• pp.804-811
• /
• 2008

Purpose : Childhood obesity is a problem that places a child at great risk for becoming an obese adult. To prevent obesity, it is important to focus on early life risk factors that may contribute to childhood obesity. The aim of this study is to find obesity-causing infantile risk factors in preschool children. Methods : A total of 223 children aged 3 to 5 years old from Busan were the subjects of this study. We calculated their body mass index (BMI) and classified them into two groups (normal weight and overweight/obese children). Information regarding parental weight and height, mother's educational level and employment status, birth weight, feeding patterns, start time of weaning, duration of night feeding, and fosterer was obtained by using questionnaires. Results : There were 68 (30.5%) overweight/obese children and 155 (69.5%) normal weight children. Overweight/obese children were significantly associated with formula milk feeding, rapid weight gain during the first 6 months, and maternal obesity (P<0.05). There were no statistical differences in paternal obesity, mothers educational level and employment status, birth weight, start time of weaning, duration of night feeding, and fosterer between the normal and overweight/obese children. Conclusion : Although healthy diet and regular exercise will remain the cornerstones of weight management in obese children, our data supports the view that education about maintaining a normal weight could be introduced much earlier in families with high-risk children.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1865-1872
• /
• 2015

This study attempted to investigate consumer perceptions and attitudes towards reducing sugar intake by providing data to develop guidelines for the government and food-related industries to encourage Korean consumers to maintain appropriate levels of sugar intake. A survey was conducted on 238 adult consumers regarding their purchasing power for products with high sugar content in Seoul and Bundang, Gyeonggi area from September 1~30, 2013. Nutritional information on sugary products had a greater impact than media and others' recommendations on consumer awareness regarding need to reduce sugar intake. External factors such as health and weight control were stronger reasons for consuming reduced amounts of sugar or sugar-free products than internal factors such as sweetness. However, internal factors-such as taste-did not have a greater effect on consuming reduced amounts of sugar or sugar-free products than environmental factors-such as absence of purchase channels. Consumers indicated higher acceptance for 50% reduction in sweetness of existing commercial products. Regarding methods of lowering sugar intake, sugar replacement and reducing sugar consumption both generally and at home were preferred. In addition, consumers were likely to pay 10~14% more for sugar-reduced products than for existing products. Overall, consumers expressed positive attitudes towards reducing sugar intake in the future, although those in their twenties tended to be more passive than other age groups.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.7
• /
• pp.994-1001
• /
• 2012

Quality changes of pre-processed garlic, peeled and chopped, were analyzed during storage at $-18^{\circ}C$ or $2^{\circ}C$ for 30 days and at $20^{\circ}C$ for 3 days only for chopped garlic. As storage time increased, Hunter L values decreased and a, b values increased, indicating browning regardless of the pre-process type and storage temperature. Decay and sprouting rates of peeled garlic during storage at $2^{\circ}C$ significantly increased while those of peeled garlic were maintained during storage at $-18^{\circ}C$. Weight loss of peeled garlic during storage was greater at $-18^{\circ}C$ than at $2^{\circ}C$. Hardness of peeled garlic rapidly decreased by half from 1.04 kg to 0.58 kg by freezing, and it did not significantly change during the storage period. Viable numbers of total aerobic bacteria of peeled and chopped garlic did not significantly change during the storage period at $2^{\circ}C$ but were reduced at $-18^{\circ}C$. Total aerobic bacterial count of chopped garlic stored at $20^{\circ}C$ slightly increased during the storage period. Pyruvic acid content of chopped garlic was almost 2.5 times higher than that of peeled garlic at the initial stage (463.87 ${\mu}mol/g$ and 190.52 ${\mu}mol/g$, respectively). As storage time increased, pyruvic acid content of peeled garlic increased while that of chopped garlic decreased. These results indicate that pre-process type and storage temperature affected the quality changes of garlic during storage.