• 제목/요약/키워드: 3.5 GHz band

검색결과 840건 처리시간 0.031초

재구성 정합 회로를 이용한 평판형 이중 모드 안테나 설계 (Design of a Dual-Mode Planar Antenna Using a Reconfigurable Matching Network)

  • 김윤건;계영철;추호성
    • 한국전자파학회논문지
    • /
    • 제23권12호
    • /
    • pp.1337-1342
    • /
    • 2012
  • 본 논문에서는 RF 스위치 역할을 하는 핀-다이오드를 이용하여 정합 회로의 형상을 변경하는 새로운 형태의 재구성 안테나를 제안하였다. 개발된 안테나는 HSDPA 대역(2.1~2.2 GHz), WiBro WiFi 대역(2.3~2.5 GHz)에서 Mode 1과 Mode 2의 두 가지 모드로 동작할 수 있도록 하였으며, polyarcylate 기판의 양면을 이용하여 제작 및 측정을 하였다. 측정 결과, Mode 1과 Mode 2의 동작 주파수에서 547 MHz($S_{11}$ <-3 dB, 2.035~2.582 GHz), 600 MHz($S_{11}$ <-3 dB, 2.2~2.8 GHz)의 대역폭을 보였으며, 각각 -4.4 dBi, -4.5 dBi의 x-y 평면 평균 수직 복사 성능을 보였다.

대역 저지 특성을 갖는 소형 광대역 안테나 (Compact wideband printed antenna with band-rejection characteristic)

  • 최우영;설경문;정지학;정경호;최재훈
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.259-264
    • /
    • 2005
  • In this paper, a novel compact microstrip-fed antenna with band-rejection characteristic for wideband applications is proposed. By cutting an L-shaped notch on the radiation patch, the wideband property for the proposed antenna is achieved. In addition, a C-shaped slot is introduced to obtain the band rejection operation of the antenna. The antenna, with very small size of $15.5\times21 mm^2$ including the ground plane, operates over 3.08 to 10.97 GHz and has the rejection band of 5.03 to 5.91 GHz for $S_{11}$ < -10 dB.

  • PDF

이미지 제거 혼합기의 설계 (The Design of Image Rejection Mixer)

  • 강은균;전형준
    • 전자공학회논문지
    • /
    • 제54권5호
    • /
    • pp.123-127
    • /
    • 2017
  • 본 논문에서는 FET의 채널저항을 이용한 이미지 제거 혼합기를 제작하여 그 특성을 분석하였다. 이 혼합기는 IF 50MHz~90MHz, LO 8.17GHz 및 RF 8.08GHz~8.12GHz로써 8GHz대역의 64QAM에 적용할 수 있도록 하였다. 측정 결과 -20dBm의 IF 신호와 10dBm의 LO 신호를 인가하였을 때 -33.2dBm의 RF 출력을 얻었으며, 약 12.9dB의 변환손실을 보였으며, 8.1GHz RF 신호에 대하여 LO 신호는 14.3dB, 이미지 신호는 10.4dB의 억압특성을 얻을 수 있었다. 또한 2-tone실험 결과 51.7dBc의 IMD 특성을 얻을 수 있었다.

높은 비저항을 갖는 RF 소자용 CoPdAlO 박막의 자기적 특성 (Magnetic Properties of High Electrical Resistive CoPdAlO Film for RF Device)

  • 김택수;이영우;김종오
    • 한국자기학회지
    • /
    • 제11권3호
    • /
    • pp.109-113
    • /
    • 2001
  • Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.

  • PDF

노치 기능을 가지는 반원 형태의 UWB 안테나 (A planar half-disk UWB antennas having a notch function)

  • 이효경;장미희;이윤정;박종권
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
    • /
    • pp.205-210
    • /
    • 2005
  • In this paper, a planar half-circle shape ultra-wideband(UWB) antenna fed by CPW is designed, fabricated and measured for UWB communications. Within the UWB band(3.1 GHz $\sim$ 10.6 GHz), 5.15 GHz $\sim$ 5.825 GHz frequency band is used by IEEE 802.lla WLAN applications. It may be necessary to notch out this band to avoid interference with IEEE 802.lla WLAN. Therefore, we have proposed three kinds of UWB antennas having a notch function, such as a rectangular slot, a hat-shaped slot, a circle-shaped slot. The notch frequency of the proposed antenna can be adjusted by controlling the slot length or slot width. From the measured results, the proposed antennas show a good gain flatness except the IEEE 802.lla WLAN frequency band and have a reasonable agreement with simulated results.

  • PDF

CPW-fed to CPS Dipole Antenna of Microstrip Tapered Balun with Triangular Loop Director

  • Lee, Hyeonjin
    • Journal of Electrical Engineering and Technology
    • /
    • 제9권4호
    • /
    • pp.1365-1368
    • /
    • 2014
  • A CPW-fed to CPS dipole antenna of triangular loop director by microstrip tapered balun is proposed for dual and wide band operations, in this paper. The proposed antenna is consisted of a CPW-fed to CPS transform, microstrip tapered balun element, CPS dipole driver and triangular loop director. A dual and wide bandwidth of the proposed dipole antenna is realized by introducing the triangular loop director and taper matching element. The operated frequency bandwidth is 1GHz (2.14~3.14 GHz) and 1.9 GHz (4.6~6.5 GHz) to return loss criterion of less than 10 dB. The measured return loss of the proposed antenna showed good results of the dual and wide band operating frequency and the radiation pattern. The proposed antenna is able to support WLAN wireless communications applications.

WLAN/WiMAX를 지원하는 삼중대역 안테나 설계 및 제작 (Design and Manufacture of Triple-BandWidth Antennas for WLAN / WiMAX system)

  • 박원영;엄혜경;윤중한
    • 한국정보통신학회논문지
    • /
    • 제22권2호
    • /
    • pp.338-346
    • /
    • 2018
  • 본 논문에서는 W-LAN/WiMAX 시스템에 적용 가능한 모노폴 안테나를 설계 제작하였다. 제안된 안테나는 마이크로스트립 급전을 바탕으로 세 개의 선로와 하나의 슬릿을 갖도록 구성하여 삼중대역 특성을 갖도록 설계하였다. 세 개의 선로의 길이와 슬릿을 적절하게 조정하여 본 논문에서 요구되는 특성을 얻기 위한 최적화된 수치를 얻었다. 제안된 안테나는 $42.5mm(W1){\times}52mm(L1){\times}1.0mm(t)$의 유전체 기판 위에 $32.0mm(W2+W3){\times}47.1mm$ (L3+L4+L5+L8)의 크기로 제작되었다. 제작 및 측정 결과로부터 158 MHz (813 ~ 971MHz), 630 MHz (2.10 ~ 2.73GHz) 그리고 1190 MHz (4.83 ~ 6.02GHz)의 대역폭을 얻었다. 또한 제작된 안테나의 통해 삼중대역 안테나에서 요구되는 이득과 방사 패턴 특성을 확인하였다.

수신 대력 잡음과 혼변조 왜곡 신호 제거 루프를 갖는 Feedforward 대전력 증폭기 설계 (A Feedforward High Power Amplifier with Loops that can Reduce RX Band Noise as well as Intermodulation Distortion Signals)

    • 한국전자파학회논문지
    • /
    • 제12권2호
    • /
    • pp.308-315
    • /
    • 2001
  • 본 논문에서, Feedforward 기법을 이용하여 송신 혼변조 왜곡 신호뿐만 아니라 수신 대역 잡음도 감소시킬 수 있는 새로운 전력 증폭기를 제안했다. 대전력 증폭기는 IMT-2000 기지국 송신 주파수 대역에서 구현되었다. 송신 대역 혼변조 왜곡 신호와 수신대역 잡음 신호는 가변 감쇠기와 위상 천이기, 에러 증폭기의 제어에 의해 감소되어진다. 두 개의 루프, 즉 혼변조 왜곡 신호와 수신대역 잡음 신호제거 루프를 포함하고 있는 제안된 전력 증폭기를 사용하면 송신 대역 통과 여파기의 수신 대역 감쇠 특성을 엄격히 하지 않아도 되어 다양한 무선통신 시스템에서 낮은 송신경로 삽입 손실을 가진 듀플렉서를 제공할 수 있다. 전력 증폭기의 2-tone 실험은 5MHz 주파수 간격을 가진 2.14GHz에서 하였고, 수긴 대역 제거 실험은 중심 주파수가 1.95GHz인 60MHz 수신 전체 대역에서 하였다. 실험 결고, 혼변조 왜곡 제거 성능과 수신 잡음 제거 성능이 각각 31 dB와 21dB이상이었다.

  • PDF

GPS용 역 L형 기생소자를 이용한 이중대역 마이크로스트립 안테나 설계 (A Design of Dual-band Microstrip Antennas using Stacked Inverted-L-shaped Parasitic Elements for GPS Applications)

  • 김준원;우종명
    • 한국ITS학회 논문지
    • /
    • 제14권3호
    • /
    • pp.31-37
    • /
    • 2015
  • 본 논문에서는 GPS $L_1(1.575GHz)$$L_2(1.227GHz)$ 대역을 수용할 수 있는 새로운 형태의 이중대역 마이크로스트립 안테나를 설계 및 제작하였다. 주파수대역 간격이 큰 이중대역 특성을 확보하기 위해 제안된 안테나는 반 파장($L_2$ 대역) 패치 안테나의 윗면에 ${\lambda}/4$($L_1$ 대역)크기의 역 L형 기생소자들을 방사 개구면 양측에 적층하였다. 패치 소자와 기생소자들 간의 커플링을 통하여 공진시킴으로써 선형편파 이중대역 특성을 얻을 수 있었다. 다음으로 GPS의 경우 원형편파를 사용하기 때문에 패치 상에 ${\lambda}/4$($L_1$ 대역) 역 L형 기생소자를 서로 직각으로 시퀀셜 로테이션 기법을 이용하여 적층 시키고, 안테나의 한쪽 대각선 양 끝을 절개하여 원형편파 이중대역 마이크로스트립 안테나를 설계하였다. 이렇게 설계된 원형편파 안테나의 크기는 $0.43{\lambda}L{\times}0.43{\lambda}L{\times}0.06{\lambda}L$ (여기에서 ${\lambda}L$은 1.227 GHz의 공기 중 한 파장)로 2중 구조 자세를 유지시켰다. -10 dB 대역폭은 GPS $L_1$대역에서 120 MHz(7.6%), GPS $L_2$대역 82.5 MHz(6.7%)로 측정되었으며, 3 dB 축비 대역폭은 172 MHz(10.9%)와 25MHz(2.03%)로 각각 측정되어, 모두 GPS $L_1$$L_2$ 대역의 요구대역폭(각각 24 MHz)을 만족한다. 한편 방사 패턴은 모든 주파수에서 마이크로스트립 안테나와 같은 브로드 사이드 패턴 형태를 형성하였다.