• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.117-126
• /
• 2012

This study carried out on the manufacturing of pidan. The production of pidan can be one of solutions for over-produced eggs and stable egg price. For the alkali-pickling solution for manufacturing of Pidan, the tested concentration of NaOH and NaCl were respectively as 3, 5, 7% and 5, 10, 15, 20%, and examined every 2 days for 14days. According to the results, pH value of alkali-pickling solution was increased by the increment of NaOH concentration and the pickling period, and was decreased by the increment of NaCl concentration. The pH value of egg yolk was increased by the increment of NaOH concentration, but it was not significantly different by the NaCl concentration. By the increment of NaOH and NaCl concentrations, the alkali infiltration in egg yolk and egg white was accelerated. Furthermore, the weight change of the eggs in the alkali-solution has no effects on manufacturing of Pidan. Liquefied albumen showed significant differences by NaOH concentration rather than that of NaCl. There was no liquefied albumen for 14days at 3% of NaOH, but it was found between 11-12days at 5% and 8-10days at 7%, respectively. The pH values of egg white when it was liquefied albumen were between 11.8 and 12.0. Pidan was made by heat treatment after 6-7days dipped in the solution at the concentration of 7%, about 10days at 5%, and 12-14days at 3% of NaOH, respectively. Although, the period of manufacturing of Pidan was saved by the increment of NaOH concentration, liquefied albumen was accelerated and the food preference was decreased by ammonia odor. Therefore, the suitable concentration of NaOH is between 3 and 5%, and that of NaCl is between 5 and 10% due to the effect of salinity by the soaking period. Through this study, optimal pickling solution and dipping time for manufacturing of Pidan was figured out, and also find out that it can save a time about 15days for manufacturing of Pidan.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.38-44
• /
• 1997

6063-T5 alloys are tested in laboratory air, water and 3% NaCl solution to investigate the effects of corrosive environment on the retardation behavior through single overload fatigue test. Also, the fatigue crack propagation and the crack closure behavior are studied. The results obtained in this experimental study are summarized as follows. 1) Behaviors of fatigue crack growth retardation are observed in water and 3% NaCl solution as they do in air. The number of delay cycles and the size of affected region by single overload decrease greatly in water and 3% NaCl compared with those in air. 2) In fractographic results, the overload marking by single overload appear remarkably in air, but indistinctly in water and 3% NaCl solution. 3) The effect of crack closure on crack propagation is most remarkable in the beginning of crack propagation. With crack propagation, the crack closure level and its effect decrease greatly.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.2
• /
• pp.93-103
• /
• 2022

Currently, biofibers are used as a reinforcement in polymer composites for structural elements and construction materials instead of the synthetic fibers which cause environmental problems and are expensive. One of the chemicals with a pH close to neutral that can be potentially used as a modified fiber material is sodium chloride (NaCl). Therefore, this study aims to investigate the characteristics of a composite board made from NaCl-treated kenaf fiber. A completely randomized design method was used with consideration of two factors: the content of NaCl in the treatment solution (1 wt%, 3 wt%, and 5 wt%) and the duration of immersion of fibers in the solution (1 h, 2 h, and 3 h). The NaCl treatment was conducted by soaking the fibers in the solution for different durations. The fibers were then rinsed with water until the pH of the water reached 7 and subsequently dried inside an oven at 80℃ for 6 h. Kenaf fiber and epoxy were mixed manually with the total loading of 20 wt% based on the dry weight of the fiber. Physical and mechanical properties of the fibers were then evaluated based on JIS A 5908 particleboard standards. The results showed that increasing NaCl content in the fiber treatment solution can increase the physical and mechanical properties of the composite board. The properties of fibers treated with 5 wt% NaCl for 3 h were superior with a modulus of elasticity of 2.085 GPa, modulus of rupture of 19.77 MPa, internal bonding of 1.8 MPa, thickness swelling of 3%, and water absorption of 10.9%. The contact angle of untreated kenaf fibers was 104°, which increased to 80° and 73° on treatment with 1 wt% and 5 wt% NaCl for 3 h, respectively.

• Journal of Ocean Engineering and Technology
• /
• v.1 no.2
• /
• pp.123-129
• /
• 1987

Corrosion fatigue fracture of dual phase steel(SS41) and raw material steel(SS41) were investigated in 3.5% NaCl aqueous solution at PH 4,6,9 and 11. The fatigue limit of dual phase steel is increased approximately 1.8 times larger than that of raw material in air. The corrosion fatigue life of dual phase steel is about 5-10 times larger than that of raw material in 3.5% NaCl aqueous solution. The reduction of fatigue life is larger for the acidsalt solution than for the alkali salt solution. The reduction of stress level on the reduction ratio of corrosion fatigue life is large as pH 6-11. The reduction ratio of corrosion fatigue life of dual phase steel and raw material is nearly coincided at pH 2. While at pH4-2 the reduction ratio of corrosion fatigue life only depends on the corrosion effect. It has been found that the corrosion resistance effect of dual phase steel is smaller than that of raw material in corrosion fatigue crack propagation rate. As pH below 6 is changed, it can be clearly observed from raw material that the brittle intergranular fracture is characterized, and from the above result, the influence of corrosion of dual phase steel is small.

• The Korean Journal of Malacology
• /
• v.26 no.2
• /
• pp.145-149
• /
• 2010

The effects of diluents composition on cold storage for Scapharca broughtonii (Schrenck) sperm were examined in the percentage of sperm activity and survival rate. Various diluents of glucose solutions (10 mM Hepes-pH 7.8), 600 mM NaCl, stein solution, Ringer's solution (230 mM NaCl, 8 mM KCl, 2 mM $CaCl_2$, 3.7 mM $MgCl_2$, 0.2 mM $NaHCO_3$, 10 mM Hepes-pH 7.8), 20%, 25% ASW (NaCl 2.7 g + KCl 0.07 g + $CaCl_2$ 0.12 g + $MgCl_2$ 0.46 g + $NaHCO_3$ 0.05 g + distilled water 100 ml) were used to store th sperm at $4^{\circ}C$. The storage effect was evaluated using sperm activity and survival rate. Ringer's solution was found to be better diluents which maintained high activity and survival rate of sperm for a storage period of 7 days. Optimal pH of diluents to store the sperm at $4^{\circ}C$ is 7.5.

• Korean Journal of Poultry Science
• /
• v.20 no.3
• /
• pp.125-131
• /
• 1993

This study was performed to find the desirable conditions for processing salted hard-boiled egg without cracking egg shell in NaCl solution under pressure. Among the many factors affecting saltiness of the shell egg, concentration of NaCl solution(0~40%), different salting time(0~45h) and salting pressure (0~4.5kg/$\textrm{cm}^2$) were employed to identify the permeability of NaCl into shell egg at ambient temperature. The saltiness of the shell egg was proportionally risen as concentration of NaCl solution, salting time and pressure increased. The most desirable saltiness was observed at the 0.70~1.00% of NaCl in albumen and 0.40~0.45% in yolk, Besides the saltiness, sensory evaluation of the shell egg were carried out to evaluate the quality of the salted shell egg. The effect of various concentration of NaCl solution, salting time and pressure on sensory scores of hard-boiled salted eggs showed that 20~40% of NaCl solution, 12~20 h of salting time, 3~4.5 kg/$\textrm{cm}^2$ of salting pressure were proper conditions for processing the product. These results indicate that the desirable condition to get salted hard-boiled shell egg were ; 30% of NaCl solution, 16h of salting time and 4.0kg/$\textrm{cm}^2$ of salting pressure.

• Journal of Ocean Engineering and Technology
• /
• v.6 no.1
• /
• pp.140-147
• /
• 1992

Corrsion fatigue test was performed under rotated bending in 3.5% NaCl aqueous solution having a temperature from 278.deg.K in order to investigate the effects of aqueous solution remperature on the corrosion fatigue fracture of raw material steel(SS41) and dual phase steel that was produced from SS41 by a series of heat treatment. Corrosion fatigue life decreases remarkably with increase in solution temperature or with decrease in stress level. The corrosion fatigue life and the crack propagation rate at 303.deg.K show the similar behaviors with those at 318.deg.K, which is assumed to be caused by concentration polarization phenamena. The number and the lengths of microcracks increase with increase in solution temperature, so they lead to the decrease in corrosion fatigue life.

• Korean Journal of Food Science and Technology
• /
• v.22 no.3
• /
• pp.343-349
• /
• 1990

The solubility of protein and phytate was measured at various pH's in distilled water and at various concentrations of NaCl, $CaCl_2\;and\;Na_2SO_3$ solutions, and then optimum condition for producing low phytate protein isolate from perilla flour was investigated. The protein solubility in water showed minimum at pH 4.0 and increased at pH higher or lower than 4.0, while phytate solubility was highest at pH 5.0 and decreased at pH higher or lower than 5.0. In NaCl solution, protein solubility was lowest between pH 3.0-4.0, while phytate solubility was high between pH 2.0-5.0 and abruptly decreased above PH 6.0. In $Na_2SO_3$ solution, protein solubility was lowest between pH 2.0-3.0 and phytate solubility showed maximum values between pH $5.0{\sim}6.0$, and it's solubility was low in 3% salt concentration at all pH ranges. In $CaCl_2$ solution, protein solubility in 3% salt concentration was relatively low at all pH ranges, and phytate solubility showed highest values between pH $2.0{\sim}3.0$ and abruptly decreased (1.0%) above pH 4.0. In order to make low phytate protein isolate, defatted perilla flour protein was extracted at pH9.0 and precipitated at pH 4.0 in 3% NaCl solution. The yield of low phytate protein isolate was 61.4% of total protein. This protein was found to contain 0.02% phytate by weight.

• Applied Chemistry for Engineering
• /
• v.20 no.3
• /
• pp.296-300
• /
• 2009

Generation of chlorine dioxide ($ClO_2$) was studied by the un-divided electrochemical cell system using $RuO_2$ anode material. Sodium chlorite ($NaClO_2$) was used as a precursor compound of chlorine dioxide. Effect of various operating parameters such as feed solution flow rate, initial solution pH, $NaClO_2$ and NaCl conc., and applied current density on the produced chlorine dioxide concentration and solution pH were investigated in un-divided electrochemical cell system. Produced chlorine dioxide concentration and solution pH were strongly depends on the initial solution pH and feed solution flow rate. Sodium chloride (NaCl) was not only good electrolyte, it was also used as a raw material of chlorine dioxide with $NaClO_2$. Observed optimum conditions were flow rate of feed solution (90 mL/min), initial pH (2.3), $NaClO_2$ concentration (4.7 mM), NaCl concentration (100 mM), and current density ($5A/dm^2$). Produced chlorine dioxide concentration was around 350 mg/L and solution pH was around 3.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.1
• /
• pp.66-72
• /
• 2000

In these days, with development of industry, the use of machines and structures like ships, airplanes, bridges, power plants, and structure for construction has increased and these machines and structures are used in various corrosive environment. Especially, in case of STS 304, which is material for every kind of machine and chemical plant, it makes many problems related with corrosion and as a result of this, there are happening tremendous economic loss. Therefor, in this study, the test for polarization characteristics was carried out to study characteristics of crevice corrosion of STS 304 which is austenitic stainless steel, in NaCl environment.The main results obtained are as follows :1) Part of crevice is corroded, neighboring outside surface of crevice is passivation. 2) In polarization behavior, corrosion potential of STS 304 become more noble as the concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5% that of STS 3.4 become less noble. 3) The current density under corrosion potential was high drained as concentration of NaCl solution increased by 3.5% but the concentration increased over 3.5%, the current density was low drained.