• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.130-132
• /
• 2008

This paper describes the current characteristics of outage generator for microgrid in outage mode operation. The outage can be generated with 3-phase voltage disturbance generator. The STS current becomes very huge during the first cycle of the outage, and the magnitude of the current depends on the time impedance, series transformer leakage inductance, interfacing reactor of PCS, and the maximum allowable PCS output current. The current and load voltage waveform are analysed through simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.33-35
• /
• 1999

This paper describes the test results of the single phase 3kVA high temperature superconducting power trans-former. The tapes are made with Bi-2223 and have silver alloy as the matrix. Four double pancake windings are used in total. Among them two double pancake windings are connected in series for high voltage winding and two double pancake windings are connected in parallel for low voltage winding. The rated voltages of each winding are 220/110 V. Fundamental characteristics are obtained through short circuit and no load tests. The over load capability and characteristics are investigated.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 A
• /
• pp.267-269
• /
• 1997

유한요소법에 의해 자계를 계산할 경우에 일정한 투자율을 두고 선형 해석을 하거나 비선형을 고려할 때에는 하나의 자화곡선을 이용한 뉴튼 랩슨법이 많이 사용된다. 그러나 최근 자계의 세기와 자속밀도간의 위상차를 고려할 수 있는 계산법에 대한 연구가 늘어나면서 여러 가지 방법들이 제시되고 있다. 본 논문에서는 간단한 실험데이타를 이용하여 정확히 자계의 세기와 자속밀도간의 비선형성을 고려하면서 특히, 이방성이 강한 재료를 사용하는 전기기기의 해석에 적합한 방법을 제안하며, 이 방법에 의해 삼상 변압기의 코어에서의 자계를 계산하며, 계산 결과에서 기존의 방법으로는 어려운 이방성 영향을 정확히 고려할 수 있음을 실험에 의하여 검증하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권3호
• /
• pp.115-118
• /
• 2006

In the steel industry, a steel melting electric arc furnace is used to produce both carbon and alloy steels. Steel scrap which is charged into the furnace is heated by means of electric arc between graphite electrodes and the scrap. In this melting process, current is supplied to the furnace through HCC(high current cable) which connect the furnace and transformer. Four HCCs are assigned to each phase in our system to divide the current. Since a sudden cable breaking result in the shutdown of melting process, an aging detection of HCC is very important for both an improvement of productivity and cost reduction. In this paper, the aging of the HCC is estimated by using the current ratio between four HCCs.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.689-691
• /
• 1993

This paper describes an induction heating system which is developed for CRT manufacturing. This system consists of a buck chewer, a voltage source full-bridge inverter, and a series resonant circuit with a matching transformer. A series resonant scheme is employed, and operated at the zero phase of the resonant load by PLL. This ensures maximum power transfer, good efficiency and reliability of the system. Implementation of a prototype rated of 3 kW 450 kHz is described and experimental results are given.

• 전기학회논문지
• /
• 제67권12호
• /
• pp.1723-1728
• /
• 2018

In order to investigate the voltage drop compensation effect of AT for domestic railway vehicle base, the parameters of AT voltage drop of railroad car base are Z3 (Impedance of feeder line), Xn ( Distance from railroad vehicle to AT to SS), and Dn (distance between both ATs of railway vehicle).In addition, when installed in a SSP for a railway vehicle base, there is no AT and feeder line in the railway vehicle base except for the SSP for the main line and the SSP for the railway vehicle base, so that if zero or ignored, the AC single-phase two- It can be confirmed that it becomes a form.

• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.463-470
• /
• 2006

본 논문에서는 새로운 방식의 3상 전력품질 외란발생기를 제안하였다. 제안한 방식은 전압새그(sag), 스웰(swell), 순간정전, 전압불평형, 과전압, 저전압 뿐 아니라 위상급변 발생도 가능하다. 전압변동의 각 모드별 동작해석을 하였으며, 특히 위상급변 모드에서의 위상변위량을 정량적으로 제시하였다. 위상변위량은 외란발생기를 구성하는 변압기들의 변압비에 의해 결정되므로 변위량의 설정이 용이하다. 기존방식에 비하여 구조가 간단하고 주요 구성품이 SCR 사이리스터와 변압기류이므로 시스템의 신뢰도가 높고 저렴한 비용으로 구현이 가능하다는 특징이 있다. 또한 PWM 스위칭 없이 동작이 이루어지므로 효율을 극대화할 수 있으며 제어도 용이하다. 각 모드별 동작을 시뮬레이션을 통하여 확인하였으며 5kVA 용량의 부하조건에서 실험을 수행하여 제안한 방식의 타당성을 입증하였다. 제안한 방식의 외란발생기는 UPS, DVR, DSTATCOM, SSTS 등의 전력품질 개선장치들의 성능시험을 하는데 있어서 효과적이고 경제적인 시스템을 구현하고자 하는 경우에 크게 기여할 것으로 기대한다.

• Transactions on Electrical and Electronic Materials
• /
• 제6권5호
• /
• pp.202-209
• /
• 2005

Phase evolution, microstructure and the electrical properties such as $k_p$ and $Q_m$ of $Pb(Mg_{1/3}Nb_{2/3})O_3[PMN]-Pb(Mn_{1/3}Nb_{2/3})O3[PM'N]-PbZrO_3[PZ]-PbTiO_3[PT]$ quaternary system were investigated within the compositional ranges $0{\leq}y{\leq}0.125$, y+z=0.125, and $0.39{\leq}x{\leq}0.54$ of the formula $Pb_{0.97}Sr_{0.03}[Mg_{1/3}Nb_{2/3})_y\;(Mn_{1/3}Nb_{2/3})_z\;(Zr_{x}Ti_{1-x})_{1-(y+z)}]O_3$. In the case of increasing Mn/(Mg+Mn) ratio for a fixed Zr/Ti ratio of 47.5/52.5, phase relation remained unchanged but the grain size drastically decreased, and the electrical properties changed as following: both $k_P$ and $Q_m$ reached the peak values at $Mn/(Mg+Mn)\cong0.3l7$ and gradually decreased; $\varepsilon33^T$ showed a monotonic decrease; P-E hysteresis loop gradually changed to asymmetrical one, and $E_i$ increased in correspondence. With increasing Zr/Ti ratio for a fixed Mn/(Mg+Mn) ratio of 0.317, on the contrary, the cell parameter $(\alpha^2c)^{1/3}$ gradually increased, and tetragonal-rhombohedral morphotropic phase boundary appeared in the range of $51/49{\leq}Zr/Ti{\leq}54/46$. the meantime, the grain size substantially increased, and the electrical properties changed as following: $k_P$ and $\varepsilon33^T$ reached peak values at Zr/Ti=51/49 and 48/52, respectively, and then gradually decreased; change of $Q_m$ was adverse to $k_P$; both $E_C\;and\;E_i$ considerably decreased while $P_S$ moderately increased. For the system 0.125(PMN+PM'N)-0.875PZT studied, the composition Mn/(Mg+Mn)=0.3l7 and Zr/Ti=51/49 revealed some promising electrical properties for piezoelectric transformer application such as $k_P=0.58,\;Q_m\cong1000$, and $\varepsilon^T_{33}=970$, as well as dense and fine-grained microstructure.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권3호
• /
• pp.156-156
• /
• 2000

The piezoelectric properties and the doping effect for $0.95Pb(Zr_xTi_{l-x})O_3+0.O5Pb(Mn_{1/3}Nb_{2/3})O_3$compositions were studied. Also, the heat generation and the change of electromechanical characteristics, the important problem in practical usage, were investigated under high electric field driving. As a experiment results under low electric field, the value of $k_p$ and ${\varepsilon}_{33}^T$ were maximized, but $Q_m$ was minimized $(k_p=0.57, Q_m=1550)$ in the composition of x=0.51. In order to increase the values of $Q_m$, $Nb_2O_5$ was used as a dopant. As the result of that, the grain size was suppressed and the uniformity of grain was improved. Also, the values of $k_p$ decreased, and the values of $Q_m$ increased with doping concentration of $Nb_2O_5$ . As a experiment results under high electric field driving, when vibration velocity was ower than 0.6[m/s], the temperature increase was 20[℃], and the change ratio of mechanical quality factor was less than 10[%]. So, its electromechanical characteristics was very stable. Conclusively, piezoelectric ceramic composition investigated at this paper is suitable for application to high power piezoelectric devices.

• 전력전자학회논문지
• /
• 제8권6호
• /
• pp.478-487
• /
• 2003

본 논문에서는 고압 대용량 전동기 구동용 멀티레벨 인버터의 종류 및 특징을 간략히 살펴보고, 특히 입출력 전력품질이 우수하고 전압별 시리즈화가 용이한 H-브릿지 멀티레벨 인버터의 구조적 특징 및 장점을 기술하였다. 연구 개발된 3,300V lMVA 용량의 Cascaded H-브릿지 멀티레벨 인버터의 구체적인 전력회로 구조 및 설계방법, 제어기 구성 그리고 PWM 기법을 제시하였다. 또한, 실용량의 시험을 통해 H-브릿지 멀티레벨 인버터는 출력 전압 Step이 여러 단계이고 dv/dt가 적으며 입력단 THD를 크게 낮출 수 있어 성능 면에서도 여타 방식보다 우수함을 입증하였다. 또한 생산적인 측면에서도 저압 소자를 사용하여 설계하므로 기존의 생산/시험 기술과 설비를 이용할 수 있어 매우 경제적이며 Power Cell 단위 결합 구조이므로 신뢰성 측면이나 보수/유지 측면에서도 유리하다는 결론을 얻었다.