• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.204-211
• /
• 2009

Proxy Mobile IPv6(PMIPv6) is that network-based mobility management protocol that network supports mobile node's mobility on behalf of the Mobile Node(MN). In PMIPv6 network, data packets from a Correspondent Node(CN) to a MN will always traverse the MN's Local Mobility Anchor(LMA). Even though, CN and MN might be located close to each other or within the same PMIPv6 domain. To solve this problem, several PMIPv6 Route Optimization(RO) schemes have been proposed. However, these RO schemes may result in a high signaling cost when MN moves frequently between MAGs. For this reason, we propose an adaptive route optimization(ARO) scheme. We analyze the performance of the ARO. Analytical results indicate that the ARO outperforms previous schemes in terms of signaling overhead.

• Journal of KIISE:Information Networking
• /
• v.36 no.3
• /
• pp.163-172
• /
• 2009

Various terminals equipped with multiple interfaces may receive services from wireless networks when they pass through the overlaid heterogeneous networks, and thus the vertical handovers across the wireless networks increases, which will become a big problem in the network resource management. This problem can be efficiently solved by common radio resource management (CRRM). In this paper, we propose two operation algorithms based on network selection jointly with vertical handover as the key CRRM strategies. When a new user tries to get services, the CRRM can choose the best target network according to the proposed Integrated Network Selection Algorithm. When the network cannot satisfy the request from the new users, the proposed Integrated Vertical Handover Algorithm moves existing users to neighborhood networks to accommodate new users. The performance of the proposed algorithms has been validated through extensive simulations.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.3
• /
• pp.159-164
• /
• 2019

Detecting wildfire using only color in image information is a very difficult issue. This paper proposes an algorithm to detect forest fire area by analyzing color and motion of the area in the video including forest fire. The proposed algorithm removes the background region using the Gaussian Mixture based background segmentation algorithm, which does not depend on the lighting conditions. In addition, the RGB channel is changed to an HSV channel to extract flame candidates based on color. The extracted flame candidates judge that it is not a flame if the area moves while labeling and tracking. If the flame candidate areas extracted in this way are in the same position for more than 2 minutes, it is regarded as flame. Experimental results using the implemented algorithm confirmed the validity.

• Journal of KIISE:Information Networking
• /
• v.30 no.3
• /
• pp.307-315
• /
• 2003

This paper proposes a Multicast Tree Extension (MTE) scheme for multicast in IP-based wireless networks. If a group receiver Joins a multicast group in a visited foreign network, multicast service may be disrupted when the foreign network does not have a multicast router. To avoid disruption, our scheme creates a bi-directional tunnel between the previous foreign agent (FA) and new foreign agent, if a mobile node (MN) moves from a foreign network with multicast capability to another foreign network with non-multicast capability. The MN thus continues to receive the multicast packets through the tunnel from the previous FA. Our scheme can avoid a long latency due to a long tunneling for group membership as well as multicast service disruption, even if the MN enters foreign networks with non-multicast capability. Simulation results show that our scheme offers lower costs for multicast delivery, tunneling and handoff latency than the existing scheme.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.1-9
• /
• 2002

This paper presents simple models for flow and the PIG dynamics when it passes through a $90^{\circ}$ curved section of pipeline. The simulation has been done with two different operational boundary conditions. The solution fur non-linear hyperbolic partial equations for flow is given by using MOC. The Runge-Kuta method is used to solve the initial condition equation fur flow and the PIG dynamics equation. The simulation results show that the proposed model and solution can be used fur estimating the PIG dynamics when the pig runs in the pipeline including curved section. In this paper, dynamic modeling and its analysis for the PIG flow through $90^{\circ}$ curved pipe with compressible and unsteady flow are studied. The PIG dynamics model is derived by using Lagrange equation under assumption that it passes through 3 different sections in the curved pipeline such that it moves into, inside and out of the curved section. The downstream and up stream flow dynamics including the curved sections are solved using MOC. The effectiveness of the derived mathematical models is estimated by simulation results fur a low pressure natural gas pipeline including downward and upward curved sections. The simulation results show that the proposed model and solution can be used for estimating the PIG dynamics when we pig the pipeline including curved section.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.3
• /
• pp.85-94
• /
• 1984

The WILDHABER-NOVIKOV gear, one of the circular arc gears, has the large contact area between the convex and concave profiled mating teeth, moves from one end of the tooth to the other axially making a face contact. Hence it provides a large load capacity than the Involute gear and still satisfying the law of gearing. In order to analyze the gear stress, a photoelastic investigation was carried out. Photo elastic model of the WILDHABER-NOVIKOV gears were made of Araldite CT200 in this investigation. For both the many teeth gear and the few teeth gear segments, External gears of all addendum type WILDHABER-NOVIKOV gear and the involute gear were tested. Included were the models with various profile raddi at the same pressure angle 20 .deg. and module 13.5. The flank stresses and fillet stresses of these gears were observed in each case and compared with those of gears. From this investigation, the following results were obtained. A. In the case of having many teeth gear: As the profile radius is increased, the fillet stresses of the WILDHABER-NOVIKOV gear become the same or less than that of the INVOLUTE gea, and the flank stress becomes smaller than that of the INVOLUTE gear. Therefore the better design condition is satisfied with a large profile radius. B. IN the case of having a few teeth gear: As the profile radius is increased the flank stress of WILDHABER-NOVIKOV gear becomes smaller than that of the INVOLUTE gear, but the fillet stresses become larger than that of the INVOLUTE gear. Therefore the larger design condition is satisfied with small profile radius.

• The Korean Journal of Nuclear Medicine
• /
• v.16 no.1
• /
• pp.49-54
• /
• 1982

For this study, the authors obtained and examined anterior views of the liver and spleen in two different positions, upright and supine, of 39 normal subjects and 20 patients with hepaticpathology by means of $^{99m}Tc-colloid$ and gamma camera. This examination confirms the following findings. In general, it is shown, left lobe of the liver in upright position becomes longer in height than in supine position, while the distance between lateral margin of the liver and that of the spleen becomes father in with in supine position than in upright position. The upper margin of liver moves more downward in upright position than in supine. It is noticeable that as for 5 cases with severe chronic liver disease, there is minimal alteration of the liver shape between in two positions. The comparison of the both positions for the better liver scan shows the following finding. Prominent caudate and/or left lobe are marked in the upright position in 16 cases out of the total 59, while none is found in the supine. The false cold area in lower part of the liver disappears in 7 cases in the upright position, while only one shows the disappeance of the false cold area in the supine. Left liver margin due to close contact of spleen is blurred in 3 cases in the upright position. In total 23 cases out of 59 support that the upright position is better for the liver scan, while only 4 cases support the supine position is better. These findings support two assumptions. One is that upright view can bo expected more improved resoluton than supine view for liver scan. Second is that minimal change of the liver shape in both views indicate the serious abnormality in the liver.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.1
• /
• pp.51-56
• /
• 1983

In the stability problem of the U-grooved plate, it has a circular hole, the site of the hole determines some different deformation mode when it was loaded. To determine the optimal position of the circular hole-center which not to get large distortion of the hole itself, in this paper, we studied the distributions of stresses in the neck area between hole and U-groove and the distortion mode of the deformed hole by B.E.M(Boundary Element Method) and compared with experimental results in four cases. For a distributed load, according to the center of the hole moves closer to the U-groove center (c.-c. line), the shape of the circular hole was transformed to the elliptical one(it's major axis perpendicular to the c.-c. line). In this problem, the results by Boundary Element Method was well accorded with Experiments.

• Journal of Radiation Industry
• /
• v.7 no.2_3
• /
• pp.115-119
• /
• 2013

The density profile measurement technology by gamma transmission has been widely used to diagnose processes in the field of refinery and petrochemical industry. This technology can reveal a clue and position of abnormal phenomenon of industrial processes during their operation. In this paper, the feasibility of the gamma transmission technology for detecting changes in the amount of fluid in a distillation column was evaluated by using Monte Carlo simulations. The simulations assumed that $^{60}Co$ (1.17, 1.33 MeV) sources and NaI (Tl) detectors (${\Phi}5{\times}5cm$) are located in opposite sides of a column and it concurrently moves in vertical direction. To determine the dependency of a spatial resolution on aperture size of a collimator, the simulation model for a tray in a column were simulated with the aperture sizes of 1 and 2 cm. The thickness of the high density area including a tray and fluid was 7.6 cm in the simulation. The spatial resolution of the tray was 8.2 and 8.5 cm, respectively. As a result, it was revealed that the conventional density profile measurement technique is not able to show the deviation of liquid level on a tray in a column.

• Journal of The Geomorphological Association of Korea
• /
• v.19 no.4
• /
• pp.13-25
• /
• 2012

This study aims to experimentally investigate the characteristics of secondary flows in a natural channel. For this objective, various conditions of water discharge and depth are tested in a real-scale experimental channel which has 1.2 of meandering. From results of experiments, it is observed that the maximum flow velocity exists in the outer zone of ben. This result is different from the previous studies conducted with laboratory experiments. The bank of 1:2 slope replicating the condition of natural channel is considered to cause this result. The location of the maximum flow velocity moves to the center of channel as the channel changes to be straight. It is also known from this study that two vorteces coexist on the left and right banks of bend.