• 융합신호처리학회논문지
• /
• 제2권3호
• /
• pp.57-64
• /
• 2001

본 논문은 시스템의 불확실성과 외란의 불확실성에도 불구하고 원하는 시스템 성능을 만족할 수 있는 강인한 제어기 설계에 대하여 서술한다. QFT(Quantitative Feedback Theory)에 근거한 강인한 제어기 설계과정은 시스템 파라미터 변동과 설계사양을 고려하여 결정되는 템플레이트, 한계조건 그리고 루프형성을 거친다. 설계된 제어기의 성능을 입증하기 위해 파라미터 변동에 매우 민감하고, 비선형성이 강하며 불안정한 특성을 지닌 도립진자시스템에 대하여 적용한다. 설계된 제어기에 대한 시뮬레이션과 실험결과들은 파라메파 변동과 외란에 강인한 제어성능을 보인다.

• 한국지능시스템학회논문지
• /
• 제14권3호
• /
• pp.375-382
• /
• 2004

신경회로망을 이용한 XY 테이블의 비선형 보상기법을 제안한다. 제안된 신경망 제어기는 시스템의 비선형 성분에 의한 성능저하를 보상하는 신경회로망과 시스템의 안정화를 위한 비례미분(PD) 제어기로 구성된다. 신경망 보상 구조가 적응적이고 추적오차와 파라미터 추정치가 유계가 되는 신경망 파라미터 동조알고리듬과 안정도 증명을 제시한다. 신경망 제어기를 위치 테이블에 실험함으로써 비선형 성분에 의한 성능저하를 줄이는 효과를 보여준다.

• 전자공학회논문지SC
• /
• 제41권3호
• /
• pp.1-8
• /
• 2004

유도전동기의 속도제어시 속도의 지연이나 과도한 오버슈트가 발생하는 문제점을 해결하고 급제동 혹은 제동시 입력 속도와 출력 속도의 오차를 줄이기 위해서 LQ-PID제어기를 제안한다. LQ제어기는 극점들을 상태궤환에 의해 오버슈트와 정착시간등과 같은 설계사양을 만족하는 위치에 배치하는 방법이다. 그러나 폐루프 전달함수에 영점이 존재할때는 설계사양 오버슈트에 영향을 주므로 s-평면에서 기존의 LQ설계 방법으로는 이를 만족시킬 수 없다. 본 연구에서는 이와 같은 문제점을 해결하기 위해서 LQ제어기 설계시 폐루프 전달함수의 영점이 오버슈트에 미치는 영향을 제거할 수 있는 해석적인 방안을 포함하는 새로운 LQ-PID제어기 설계 방법을 제안하고자 한다.

• 전력전자학회논문지
• /
• 제14권2호
• /
• pp.134-141
• /
• 2009

전원사고로 인하여 야기되는 전원급변상황에서 위상각의 새로운 PLL 방법은 추종속도를 개선시키기 위하여 제안되었다. 일반적으로 측정된 전원이 이상적이지 않고 고조파가 포함되어 있으며 센서의 노이즈 때문에 동기좌표계 PLL의 피드백 루프에는 LPF를 사용하고 있다. 그러므로 과도상태의 빠른 동특성을 얻기 위해서 LPF를 고려한 PLL시스템의 모델링을 제안하였다. 또한 전원의 급변 시에 빠른 위상각 검출을 위한 방법으로 자동으로 제어기 대역폭과 LPF의 차단주파수를 변동시키는 가변 파라미터 PLL방법을 제안하였다. 이를 시뮬레이션과 실험을 통해 검증하여 유효성을 보이고자 한다.

• Earthquakes and Structures
• /
• 제17권3호
• /
• pp.307-315
• /
• 2019

Building prediction and control theory have been drawing the attention of many scientists over the past few years because design and control efficiency consumes the most financial and energy. In the literature, many methods have been proposed to achieve this goal by trying different control theorems, but all of these methods face some problems in correctly solving the problem. The Evolutionary Bat (EB) Algorithm is one of the recently introduced optimization methods and providing researchers to solve different types of optimization problems. This paper applies EB to the optimization of building control design. The optimized parameter is the input to the fuzzy controller, which gives the status response as an output, which in turn changes the state of the associated actuator. The novel control criterion for guarantee of the stability of the system is also derived for the demonstration in the analysis. This systematic and simplified controller design approach is the contribution for solving complex dynamic engineering system subjected to external disturbances. The experimental results show that the method achieves effective results in the design of closed-loop system. Therefore, by establishing the stability of the closed-loop system, the behavior of the closed-loop building system can be precisely predicted and stabilized.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.48-56
• /
• 2001

This paper presents the position tracking control of a closed-loop cylinder system using electro-rheological (ER) valve actuators. After manufacturing three sets of cylindrical ER valves on the basis of Bingham model of ER fluid, a 3 dof(degree-freedom) closed-loop cylinder system having the heave, roll and pitch motions is constructed. The governing equations of motion are derived using Lagrange's equation and a control model is formulated by considering nonlinear characteristics of the system, Sliding mode controllers are the designed for these ER valve actuators in order to achieve position tracking control. The effectiveness of trajectory tracking control performance of the proposed cylinder system is demonstrated through computer simulation and experimental implementation of the sliding mode controller.

• 대한안전경영과학회지
• /
• 제17권3호
• /
• pp.363-370
• /
• 2015

In this paper, the control technique of the stepping motor using back electromotive force(B-EMF) without encoder is investigated. The stepping motor generally uses the rotary encoder to detect the rotor position. Since this method increases the cost and the motor configuration size, the new closed-loop control method applied for the B-EMF was implemented by using current detect circuit, AD-converter, and micro controller unit(MCU). The control loop of stepping motor became very simplified. The current change of stepping motor measured by the amplifier was measured and analyzed, when the missing step is occurred. Based on the data from current feedback, position errors were compensated and confirmed by using AD-converter.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.180-188
• /
• 1999

${\mu}$-synthesis is applied to design a robust controller for a seeker scan loop system which has model uncertainty and is subject to a external disturbance due to abrupt missile maneuver. The issue of modelling a real-valued parametric uncertainty of a physical seeker scan loop system is discussed. The two-degree-of-frame control structure is employed to obtain better performance. It is shown that ${\mu}$-synthesis provides a superior framework for the robust control design of a seeker scan loop system which exhibits robust performance. The proposed robust control system satisfies design requirements, and especially shows good scanning performances for conical and rosette scan patterns despite parametric uncertainty in real system model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.75.3-75
• /
• 2001

This paper addresses the design of State-feedback Robust Guaranteed-Cost Controllers with controller gain variations. Since the unstructured uncertainty is the most dominant uncertainty in the modeling of the plant, the plant is assumed to have the unstructured uncertainty. It is necessary to take the controller parameter perturbation into consideration when we design the robust controller. Otherwise, the resulting controller may show the fragility property. That is to say, the extremely small controller parameter variation may result in the instability of the overall closed-loop system. Therefore, the design purpose is that the maximum performance index is guaranteed in the presence of the unstructured plant uncertainty and controller parameter variations ...

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.25-30
• /
• 2017

Arago's disk system consists of a speed controller of the DC motor (inner loop controller) and a position controller of the magnetic bar angle (main controller), which are implemented by the design of the PI and PID controller, respectively. First, we analyzed the nonlinear characteristics of the Arago disk system and found the operating point range of three locations as a result. In this paper, a gain scheduler method was applied to guarantee a constant control performance in the range of $0{\sim}130^{\circ}C$, and a structure to change the controller according to the control reference value based on the previously obtained operating points was experimentally implemented. The Distributed Control Systems (DCS) configuration using the Controller Area Network (CAN) was used to verify the proposed method by improving the operational efficiency of the entire experimental system. So, simplicity of the circuit and easy diagnosis were achieved through a single CAN bus communication.