• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.285-292
• /
• 2010

This paper presents a current mode integrated control technique (CM-ICT) using a modified voltage space vector modulation (MSVM) for Z-source inverter (ZSI) fed induction motor drives. MSVM provides a better DC voltage boost in the dc-link, a wide range of AC output voltage controllability and a better line harmonic profile. In a voltage mode ICT (VM-ICT), the outer voltage feedback loop alone is designed and it enforces the desired line voltage to the motor drive. An integrated control technique (ICT), with an inner current feedback loop is proposed in this paper for the purpose of line current limiting and soft operation of the drive. The current command generated by the PI controller and limiter in the outer voltage feedback loop, is compared with the actual line current, and the error is processed through the PI controller and a limiter. This limiter ensures that, the voltage control signal to the Z-source inverter is constrained to a safe level. The rise and fall of the control signal voltage are made to be gradual, so as to protect the induction motor drive and the Z-source inverter from transients. The single stage controller arrangement of the proposed CM-ICT offers easier compensation. Analysis, Matlab/Simulink simulations, and experimental results have been presented to validate the proposed technique.

• 대한디지털의료영상학회논문지
• /
• 제11권2호
• /
• pp.109-114
• /
• 2009

Carried out an experiment for quantitative evaluation about intraoral sensor among oral dental imaging equipments in PACS environment. For evaluation, testing environment & evaluation criteria are established that refer to the 'IEC 62220-1-2' and experimented with set up the standard radiation penetration that correspond with RQA-3(IEC 61267). Results of experiments using the image J, derived the ESF(edge spread function), LSF (line spread function) and calculated the MTF(modulation transfer function) finally. As a result, the MTF that 0.1, 0.2sec are 10% about 10 lp/mm and 0.32 sec is the 10% about 9 lp/mm in level represents the value of the MTF. Change of scan condition in dental environmental, according to the MTF value taken note that no changes can be seen enough. However, the dimensions of each other size $1(1200{\times}1600)$, size $2(1440{\times}1920)$ intraoral sensors for 3 lp/mm, respectively 40%, 90% of the note might have been the difference between the value of MTF, in accordance with standard sensors might note differences could be observed.

• 한국인터넷방송통신학회논문지
• /
• 제15권3호
• /
• pp.91-98
• /
• 2015

제한된 스펙트럼 자원의 효율적 사용을 위한 하나의 해법으로 GPS 시각 기반의 이동선형주파수변조(SLFM)를 갖는 동일채널 다중국소 레이더 운용을 위한 방법을 제시한다. 제안된 알고리즘은 선택된 SLFM 신호 중에 상호상관 특성으로부터 허용할 수 있는 최소상관 수준을 갖는 SLFM 후보군을 찾는다. 제안 방법의 검증을 위해 단일 톱니 또는 삼각 LFM 신호를 갖는 동일채널에 운용되는 수 개의 레이더에 대해 수치해석을 하였다. 간섭 및 잡음, 알고리즘 한계, 그리고 SLFM 신호의 시각 동기 오류에 대해 탐지 거리 및 거리 윤곽의 계산 결과를 고찰하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.221-222
• /
• 2014

본 논문에서는 3레벨 NPC 인버터의 전원전압변조 방식을 이용하여 넓은 변조 지수에서 제어 가능한 간단한 중성점 제어 방법을 제안하였다. 제안한 제어 방법은 전원 전압 변조방법을 이용한 중성점 균형 계수와 정확한 옵셋 전압의 제한치를 이용하여 계산된다. 중성점 균형 계수는 전류의 극성과 상하 커패시터의 전압에 의해서 정의되어 진다. 제안된 제어 방법은 중성점 제어를 위해 공간전압 PWM과 불연속 PWM까지 동작범위를 확장하여 동작되어 진다. 제안된 방법은 넓은 변조지수에서 전원전압변조를 이용하여 공간전압 PWM방법을 쉽게 구현할 수 있다. 제안된 중성점 제어 방법의 타당성은 시뮬레이션을 통하여 검증하였다.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.365-371
• /
• 2019

Recently, the demonstration and research on the power transmission using high voltage DC such as HVDC(High Voltage DC), Smart Grid, DC transmission and distribution have been actively conducted. In order to control the power converter in high-voltage DC power transmission system, SMPS(Switching Modulation Power Supply) for power converter control using high-voltage DC input is essential. However, the demand for high-pressure SMPS is still low, so the development is not enough. In the low-output SMPS using the high-voltage input, it is difficult to achieve high efficiency due to the switching transient loss especially at light load. In this paper, we propose a new switching scheme for high power SMPS control for low output power. The proposed method can provide better efficiency increase effect in the light load region compared to the existing PWM method. To verify the feasibility of the proposed method, a 40 W SMPS for HVDC MMC(Modulation Multi-level Converter) was designed and verified by simulation.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.386-391
• /
• 2009

PSPICE circuit parameters of the blue laser diodes grown on wurtzite AlGaInN multiple quantum well structures were extracted directly from the three level rate equations. The relevant optical gain parameters were separately calculated from the self-consistent multiband Hamiltonian. The resulting equivalent circuit model for a blue laser diode was schematically presented, and its modulation characteristics, including the pulse response and the frequency response, have been demonstrated by using a conventional PSPICE.

• 한국정보통신학회논문지
• /
• 제3권1호
• /
• pp.223-228
• /
• 1999

A five-level VSI(Voltage Source Inverter) is introduced as a SVC(Static Vu Compensator) like a large scale power source. The problems in using SVC are that the power device can easily be destroyed by voltage unbalance and accurate reactive power control is difficult because of voltage variation. A asymmetrical PAM(Pulse Amplitude Modulation) switching pattern is proposed to solve this problem and analyze both fundamental component and harmonic current in the system. Through experimental results of 3.5 kVA experimental test system, It is confirmed that DC capacitor voltage can be controlled by asymmetrical PAM switching pattern control.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.142-152
• /
• 2016

Common mode voltage (CMV) generation is a major problem in switching power converter fed induction motor drive systems. CMV is the zero sequence voltage generated due to the switching action of power converters. Even a small magnitude of CMV with a high rate of change may circulate large bearing currents which may damage a machine's bearings and shorten its life. There are several methods of controlling CMV. This paper presents 3-level sinusoidal pulse width modulation based techniques to control the magnitude and rate of change of CMV in multilevel AC-DC-AC drive systems. Simulation and experimental investigations have been presented to validate the performance of proposed technique to control CMV in 3-level neutral point clamped inverter based AC-DC-AC system.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.120-126
• /
• 2019

This study proposes a neutral voltage balance control scheme for stable fault-tolerant operation of an active neutral point clamped (ANPC) inverter using carrier-based pulse width modulation. The proposed scheme maintains the neutral voltage balance by reconfiguring the switching combination and modulating the reference output voltage in order to solve the degradation of the output characteristic in the fault tolerant operation due to the fault of the power semiconductor switch constituting the ANPC inverter. The feasibility of the proposed control scheme is confirmed by HIL experiment using RT-BOX.

• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.472-480
• /
• 2009

본 논문은 3상 NPC형 3레벨 인버터의 과변조 SVPWM 기법과 변조비에 대한 출력전압의 고조파를 분석하였다. 3상 NPC형 3레벨 인버터는 SVPWM을 적용하여 선형영역을 0.907까지 확장하였고 과변조 영역에서는 푸리에 급수에 의한 추종전압의 보상기법을 적용하여 6 스텝영역까지 운전할 수 있도록 하였다. PWM 형태인 출력전압의 고조파 특성분석에는 PD방식의 멀티 캐리어 기법에 대하여 이중 푸리에 급수를 적용하여 해석하였다. 시뮬레이션은 PSIM을 사용하여 구현하였고 3레벨 인버터의 영역도의 각 영역에 대해서 고조파의 특성을 확인하였다. NPC형 3레벨 인버터의 고조파 분포는 선형영역에서는 캐리어 주파수의 측대 고조파가 분포되고, 과변조 영역으로 넘어가면서 기본파에 의한 고조파 성분이 점차 증가하고 캐리어 주파주의 사이드 밴드의 고조파 성분은 감소함을 확인하였다. 본 논문에서의 고조파 해석을 검증하기 위하여 동일한 조건에서 시뮬레이션과 실험을 수행하였다.