• 구강회복응용과학지
• /
• 제31권2호
• /
• pp.112-125
• /
• 2015

구강 내의 모습을 재현하는 복제모델을 만드는 것은 치과 진료에서 가장 중요한 과정이며 정확성과 효율성이 동시에 만족되어야 하는 과정이다. 현재 기술이 발전함에 따라 치과 진료에서도 디지털화가 이루어지고 있다. 이러한 것을 가능하게 하는 가장 중요한 작업 중 하나가 바로 구강 내의 모습을 3차원적으로 재구성하는 디지털화이다. CAD/CAM 시스템의 3가지 성분 (1) data capture component (digitizers), (2) design component (CAD software), (3) manufacturing component (CAM)중 가장 기본이 되며 뒤의 과정에 막대한 영향을 끼치는 것이 data capture component 즉 구강 스캐너이다. 이 논문은 Pubmed와 Google Scholar에서 최근 5년 전 연구 논문들을 기초로 하여, 각각의 스캐너의 구동원리와 스캐너들 간의 정확성, 현재 구강 스캐너가 치과 영역에서 적용되고 있는 분야와 그 정도를 분석하였다.

• 대한치과기공학회지
• /
• 제41권2호
• /
• pp.81-86
• /
• 2019

Purpose: The purpose of the present study was to compare the internal fit of two different temporary restorations fabricated by dental CAD/CAM system and to evaluate clinical effectiveness. Methods: Composite resin tooth of the maxillary first molar was prepared as occlusal reduction(2.0mm), axial reduction(1mm offset), vertical angle(6 degree) and chamfer margin for a temporary crown and duplicated epoxy die was fabricated. The epoxy dies were used to fabricate provisional restorations by CAD/CAM milling technique or 3D-printing technique. The inner data from all crowns were superimposed on the master die file in the 'best-fit alignment' method using 3D analysis software. Statistical analysis was performed using a Wilcoxon's rank sum test for differences between groups. Results: It showed that the internal RMS(Root Mean Square) values of the additive group were significantly larger than those of other group. No significant differences in internal discrepancies were observed in the temporary crowns among the 2 groups with different manufacturing method. Conclusion: All the groups had the internal fit within the clinical acceptable range (< $50{\mu}m$). The continuous research in the future to be applied clinically for the adaptation of additive manufacturing technique are needed.

• 한국기계가공학회지
• /
• 제19권9호
• /
• pp.59-70
• /
• 2020

Three-dimensional (3D) design data is used for various purposes throughout the life cycle of a plant construction project. Plant 3D CAD systems support 3D modeling based on specs-catalogs, which contain data that are used for different purposes such as design, procurement, production, and handover. Therefore, it is important to share the spec-catalog data in the 3D design model with other application systems. Sharing this data thus requires a system that extracts spec-catalog data from plant 3D CAD systems and converts them into neutral model data. In this paper, we analyze equipment spec-catalog data of plant 3D CAD systems and, based on these analyses, define the data structure for neutral spec-catalog data. We subsequently propose a procedure that translates native spec-catalog data to neutral model data and develop a prototype system that performs this operation. The proposed method is then experimentally validated for the test spec-catalog data.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.272-278
• /
• 2010

The purpose of this study was to research about Dobby weave design using Computer-Aided Weaving System. For performing this design study, first, it was researched the characteristics of the classified woven fabrics, weaving processing, structure of Dobby loom, and Computer-Aided Dobby Weaving system theoretically. To develop Dobby woven design, Patternland Weave Simulator(U.S.A) for computer weave system was used. Among the developed Dobby woven designs by computer weaving system, mainly three of them were selected and woven into Dobby loom. To see the visual image of the fabric end-use, some of the scanned Dobby fabrics were simulated to the three-dimensional virtual images by Alias CAD system. The result of this study can be summarized as follows. Before the step of weaving Dobby fabrics on the woven design works, Computer-Aided Weaving system can be done very easily to apply the design step of Dobby woven fabrics, specially in case of the complicated woven structure. Also the usage of the simulation CAD system in visual image of the final products, ultimately can be saved cost and developed the higher value-added goods in more response to consumer demands.

• 한국산학기술학회논문지
• /
• 제8권4호
• /
• pp.775-780
• /
• 2007

쾌속조형기술(Rapid Prototyping Technology)은 설계단계에 있는 3차원 모델을 시제품(Prototype)으로 다른 중간과정 없이 빠르게 생성하는 새로운 기술을 말한다. CAD 모델 데이터는 3차원 형상 시스템이지만 모니터 화면이나 문서로 출력할 때는 2차원으로 밖에 표시되지 않는다. 반면에 쾌속조형기술은 설계된 3차원 CAD 데이터를 2차원 단면 데이터로 변환한 후 RP(Rapid Prototyping)공정을 적용하여 순차적으로 적층해 감으로써 CAD 데이터와 같은 3차원 입체 형상을 제작하게 된다. 그러나 RP 시스템은 매우 가격이 비싸서 칫솔이나 완구 등과 같은 생활용품을 제작하는 중소기업에서는 구입하기 어려운 상황이다. 본 논문에서는 오픈소스를 사용하여 RP 기술을 구현함으로써 저렴한 가격으로 구매할 수 있는 RP 시스템을 개발하기 위한 3차원 제어시스템을 제안하였다.

• Archives of Plastic Surgery
• /
• 제39권4호
• /
• pp.309-316
• /
• 2012

Computer aided design and manufacturing (CAD/CAM) technology today is the standard in manufacturing industry. The application of the CAD/CAM technology, together with the emerging 3D medical images based virtual surgical planning (VSP) technology, to craniomaxillofacial reconstruction has been gaining increasing attention to reconstructive surgeons. This article illustrates the components, system and clinical management of the VSP and CAD/CAM technology including: data acquisition, virtual surgical and treatment planning, individual implant design and fabrication, and outcome assessment. It focuses primarily on the technical aspects of the VSP and CAD/CAM system to improve the predictability of the planning and outcome.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.21-31
• /
• 1998

This study described computer aided die design system for cold forging of non-axisymmetric parts. To design the die of cold forging. an integrated approach based on a rule-base system and commercial F. E. code were adopted. This system is implemented on the personal computer and its environment is a commercial CAD package named as AutoCAD. The system includes four modules. In the initial data input module, the variables which are necessary to design of die are inputted by user and die material are selected from the database. In the analysis and redesign module, stress distrubution action on the designed die is analyzed by commercial FEM code NISA II. The designed die is modified to prevent failure in both states of stress free and pressurizing. The developed system provides powerful capabilities for die design of non-axisymmetric parts.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.91-97
• /
• 2010

Micro-abrasive Jet Machining is one of the new technology which enables micro-scale machining on the surface of high brittle materials. In this technology it is very important to fabricate a mask that prevents excessive abrasives not to machine un-intend surface. Our previous work introduced the micro-stereolithography technology for the mask fabrication. And is good to not only planar material but also for non-planar materials. But the technology requires a 3 dimensional mask CAD model which is perfectly matched with the surface topology of parent material as an input. Therefore there is strong need to develop an automated modeling technology which produce adequate 3D mask CAD model in fast and simple way. This paper introduces a fast and simple mask modeling algorithm which represents geometry of models in voxel. Input of the modeling system is 2D pattern image, 3D CAD model of parent material and machining parameters for Micro-abrasive Jet Machining. And the output is CAD model of 3D mask which reflects machining parameters and geometry of the parent material. Finally the suggested algorithm is implemented as software and verified by some test cases.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1992년도 춘계공동학술대회 발표논문 및 초록집; 울산대학교, 울산; 01월 02일 May 1992
• /
• pp.309-317
• /
• 1992

현재 3차원 좌표측정기(Coordinate Measuring Machine:CMM)는 기계가공품의 수치검사(Dimensional inspection)에 널리 사용된다. 검사과정의 자동화를 향상시키기 위해 CMM을 이용한 컴퓨터통합검사시스템이 필요하게 되었다. 이 논문에서는 자유곡면 형상에 대해 CAD지향의 검사개념을 사용하여 CMM을 이용 자동측정하고 그 결과를 토대로 측정한 자유곡면에 대한 형상오차를 분석하는 부분을 다룬다.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1665-1673
• /
• 2003

We propose an image-based three-dimensional shape determination system. The shape, and thus the three-dimensional coordinate information of the 3-D object, is determined solely from captured images of the 3-D object from a prescribed set of viewpoints. The approach is based on the shape-from-silhouette (SFS) technique, and the efficacy of the SFS method is tested using a sample data set. The extracted three-dimensional shape is modeled with polygons generated by a new iterative triangulation algorithm, and the polygon model can be exported to commercial software. The proposed system may be used to visualize the 3-D object efficiently, or to quickly generate initial CAD data for reverse engineering purposes, including three dimensional design applications such as 3-D animation and 3-D games.