• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.12 s.189
• /
• pp.117-121
• /
• 2006

Generally, micro-stereolithography technology uses laser and complex optical system as light source and light delivery system, respectively. In this research, a novel micro-stereolithography technology that uses UV lamp that is more economical than UV laser as light source and optical fiber that is simpler than previous light delivery system has been developed. Furthermore, precise control system that is composed of 3-axis linear stage and shutter has been used to fabricate truly three dimensional micro-structure. For confirming the feasibility of developed micro-stereolithography apparatus, the solidification experiments were conducted. The solidification widths and depths datum of photopolymer as varying scanning speed of the UV light have been obtained. Using developed apparatus, some micro structures were fabricated successfully.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.471-474
• /
• 2001

Recently, due to demands of faster speed and extra features for the chip mounters, there has been ever-demanding needs for the basic technology. Until four or five years ago, chip mounters placing 0.3sec/chip were considered to be in the high speed category, but since then it has become a borderline for categorizing high speed machines capable of placing 0.1sec/chip. In this study, in order to analyze the vibration of head generated by the dynamic behavior of x-frame, FEM model is composed and modal analysis is performed to identify the dynamic characteristics of the structure. Those results are compared with the modal test in order to verify the model. In this paper, Several other factors, such as definition of dynamic accuracy, static accuracy and tolerance of the axis settling range, that might affect the dynamic behavior the head are discussed.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.1160-1163
• /
• 1999

In this study, we developed FE-tip lithography system that could apply to multi-tip system and did lithography using FE-tip. The software that control FE-tip lithography system, was proposed for acquiring more adaptive data to compensate the effect of fluctuation. We found that the fluctuation effect was reduced. The minimum line width was related to applied voltage and we observed a movement of Z-axis piezo stage to correct the error of this system. When FE current was 5nA, scanning speed was $3{\mu}m/sec$ and applied voltage was 200V, we made a line pattern which had minimum line width of 614 nm. If we reduce applied voltage to several decades and increase scanning speed to $20{\mu}m/sec$, it is possible to set the minimum line width of 100 nm. The proposed system can be easily applied to multi FE-tip lithography system.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.302-302
• /
• 2000

This paper presents the measurement and correction of PCB alignment errors for PCB-manufacturing machines. The conventional PCB-manufacturing machine doesn't have enough accuracy to accommodate the demand for high-resolution circuit pattern and high-density mounting capacity of electronic chips. It is because of alignment errors of PCB loaded to the PCB-manufacturing machine. Therefore, this study focuses on the development of the system which is able to measure and correct alignment errors whit high-accuracy. An automatic optical inspection part measures the PCB alignment error using two cameras, and the high-accuracy 3-axis stage makes correct of these error. The operating system is run in the environment of Window 98 (or NT). Finally we implemented this system to PCB screen printer and PCB exposure system.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.372-380
• /
• 1994

A systematic procedure for the elements of system state matrix in multimachine systems with loads and eigenvalue technique which utilize stage matrix have widespread application in the analysis of small signal stability. Synchronous machines are represented by either a two-axis model or classical model. The interrelationship of submatrices of system matrix is investigated. Once elements of one submatrix are determined, they can be used to calculate the elements of the other submatrix. The approach is useful in the eigenvalue sensitivity analysis for various initial conditions and for the adjustment of generator controller parameters. It is illustrated for a three-machine and nine-bus multimachine system(WSCC system) with constant impedance loads.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.43 no.2
• /
• pp.77-82
• /
• 1998

Aerenchyma development in rice (Oryza sativa L.) roots is quite important for adaptation to waterlogged or reduced soil conditions. Anatomical observations were carried out to clarify the development of schizogenous and lysigenous aerenchyma in elongating crown roots of rice. The crown roots of 3rd and 4th phytomer were taken from rice plants of the 8th leaf stage grown by hydroponic culture. The schizogenous intercellular spaces in the cortex of crown root tip were observed using a light microscope with semi ultra-thin sections and the lysigenous aerenchyma in mature tissue of crown root were observed using a cryo scanning electron microscope (cryo-SEM) with freezing fracture method. The schizogenous intercellular spaces in the root tip exist obviously in the middle portion of cortical cell layers close to the root-root cap junction, but not in root cap, stele and outer cell layers of cortex. The air spaces were formed at the junction of four neighbouring cells of inner cortex in the transverse sections, and between longitudinal cell layer connected along the root axis. Although many of those spaces were filled with liquid, some spaces seem to exist as air spaces. The lysigenous aerenchyma in the cortex, which hardly filled with liquid, emerged at 3-4 cm segment from the root tip and increased toward the basal region of root axis. The developing process of lysigenous aerenchyma was primarily separation of a radial row of cells caused by the shrinking and collapsing of cortical cells and then formation of septa along the radial cell rows by the fusion of cell wall with each other. These results suggest that the schizogenous and lysigenous aerenchyma playa role as a passage for the movement of oxygen into the root tip region where oxygen is required for respiration.

• Ocean and Polar Research
• /
• v.24 no.3
• /
• pp.179-187
• /
• 2002

The Ayu Trough, located in the southern end of the Philippine Sea, represents a divergent boundary between the Philippine Sea and the Caroline Plates. A detailed geophysical survey was carried out in the Ayu Trough by R/V Onnuri. Topographically, the Ayu Trough resembles an slow spreading ridge. The trough can be divided into three sections: the south $(0^{\circ}-1^{\circ}30'N),\;middle\;(1^{\circ}30'-4^{\circ}N)$, and north $(4^{\circ}-6^{\circ}30'N)$. The seafloor in the middle section is characterized by features asymmetric with respect to the axis. These features were probably produced by NW-SE and NNW-SSE extensions and seem to support the argument that the opening of the Ayu Trough occurred in an oblique fashion. Farther south, a long transform fault but with a short offset defines the boundary between middle and southern sections. The axial depth increases a stepwise to the south of $1^{\circ}30'N$. A clear difference can be seen between the southern and middle sections with the latter exhibiting much higher mantle Bouguer anomaly values in the axial region. The anomaly indicates that the axial crust perhaps experienced a much higher degree of extension in the middle than in the southern section. The analyses of magnetic field data reveal that the region beyond 100km exhibits considerable variations, whereas the magnetic anomalies within 100km from the trough axis are very much subdued. This observation suggests that the opening of the Ayu Trough involved an initial stage of rifting of existing volcanic arcs, followed by production of new seafloor.

• Journal of The Korean Association For Science Education
• /
• v.16 no.3
• /
• pp.314-328
• /
• 1996

This study investigated the literature about science process skills' evaluation to analyse transition of evaluation objectives before and after a Scholastic Ability Test for College Entrance. In the literature survey the researcher established a 3 dimensional science assessment framework with X axis as science concept, Y axis as science process skills and Z axis as problem context. In order to analysis and compare each items the researcher selected 210 items from the 1st to the 7th trials and 138 items from the 1st to 4th Scholastic Ability Test for College Entrance and sampled 2873 science achievement test items from 10 high schools. In accordance with this taxonomy the researcher analysed and compared science process skills item forms. The following results were drawn : The items were evenly distributed in all the four areas(Earth Science, Biology, Physics and Chemistry) of the science concept domain, but they were heavily concentrated on data analysis and drawing a conclusion in science process domain. In the domain of problem context school context was the majority. In spite of distribution like this the ratio on science process skills measurement items and science achievement test items was increased after the Scholastic Ability Test for College Entrance was given. Also the ratio on item expression type was increased. Item form was almost 5 options selection type in the national level test. Although there were 4 options selection type, 5 options selection type, short answer type, essay type in school level test, rising from 33.1% to 65.5% on 5 options selection type is exhibited. This study showed that the school level item form was better various than the nation level. This point like this is the evidence for the improvement toward the science process skills test and influenced by Scholastic Ability Test for College Entrance. The ratio on the item which joined with the 3 axes had a mean of 99.3% in nation level test and mean 44.9% in school achievement test level. But the ratio in the school achievement test level increased after the Scholastic Ability Test for College Entrance was given. In view of this study we must furthermore study the item types which can evaluate valjdately science process skill's five stage each and evaluation method by the high school students' problem solving patterns and features in scientific inquiry on all science process skills elements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.7
• /
• pp.529-536
• /
• 2020

Reaction Control System of the third stage of the Korean Space Launch Vehicle II conducts roll control and 3 axis control throughout third stage engine start, satellite separation, and collision and contamination avoidance maneuver. Reaction control system consumes its propellant in each thruster operation. Hence, loading of proper amount of the propellant is important for mission success. It is needed to have a rough estimation method of propellant consumption during the flight. In this paper, we developed a energy equation using pressure and temperature data which are acquired in the on-board reaction control system. We constructed a test system which is similar with the on-board reaction control system to verify the energy equation. Test results using deionized water were compared with estimated propellant consumption. We also conducted an error analysis of the energy equation. We also presented the propellant consumption result of a system level operation test.

• The Journal of Engineering Geology
• /
• v.8 no.3
• /
• pp.275-284
• /
• 1998

Deformation behavior and microcrack development due to uniaxial compressive cyclic loading in the Pocheon granite were investigated using the ultrasonic velocity measurements and the differential strain analysis(DSA). Most microcracks were developed along the direction parallel to the loading axis. Microcracks developed at the early stage of cyclic loading were formed by propagation of pre-existing cracks. Ultrasonic velocity measurement, DSA and measurement of permanent deformation are good tools to represent microcrack development in rock. Since results from each method are slightly different, microcrack development should be interpreted from all three methods. The magnitude of microcracks developed at the early stage of cyclic loading under 80% loading level is twice compared with those under 70% loading level. The highest volumetric crack strain is about 3000, indicating that the Pocheon granite will fail with 0.3% occupation of microcrack in volume.