• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.263-264
• /
• 2013

본 논문에는 전동기 구동 가전제품에서 전해 커패시터 없이 높은 역률을 얻기 위한 제어 방법을 제안한다. 제안한 시스템은 단상 다이오드 정류기, 필름 커패시터, 3상 인버터, AC 전동기로 구성되어 있다. 높은 역률을 얻기 위해서, 이 논문은 계통 전압의 위상에 대해서 q축 전류를 지연하는 방법을 제안한다. 이 논문은 벡터제어와 Space Vector Pulse Width Modulation (SVPWM)방법을 사용하였다. 시뮬레이션 결과는 PSIM을 통하여 확인하였고, 제안한 방법의 효율을 보여주고 있다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2386-2388
• /
• 2000

This paper proposes a novel method with pseudo-on-line scheme using look-up table based on the genetic algorithm. The technique is a pseudo-on-line method that optimally estimate the parameters of fuzzy PID(FPID) controller for systems with non-linearity using the genetic algorithm which does not use the gradient and finds the global optimum of an un-constraint optimization problem. The proposed controller(GFPID) is applied to speed control of 3-phase induction motor and its computer simulation is carried out. Simulation results show that the proposed method is more excellent than conventional FPID and PID controllers.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.63-68
• /
• 2004

Since rotor position information is necessary to drive the SRM, absolute-encoder, resolver and incremental-encoder is used to detect a poor position. But, it is not desirable to use a high priced encoder and high efficient microprocessor under the condition of the simple driving system when precision control is not demanded. In this paper, Only using the reflective type 2 photosensors replace the conventional opto interrupter and slotted disk, which not only remove a slotted disk section but drive 3-phase 6/4 SRM bidirectionally. Moreover, as control circuit only is composed of common analog device economy is maximized.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.53 no.2
• /
• pp.123-128
• /
• 2004

Recently with the development of power switching device and DSP which has perip -heral devices to control AC servo system, the servo technology has met a new development opportunity. In this study, a DSP based AC servo system with a 3-phase PMSM is proposed. The newly produced DSP TMX320F2812 version C which has the performance of fast speed, 150MIPS, and rich peripheral interface is used. Also space vector pulse width modulation (SVPWM) and the digital PI control are implemented to the servo control system.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.400-402
• /
• 2007

This paper presents a vector control implementation for PMSM using Real Time Workshop and Embedded Target for TI C2000 DSP in MATLAB/SIMULINK. Speed, current and vector controllers are easily designed and implemented by using the MATLAB/SIMULINK program. Feedback of motor speed is processed through C28x QEP(Quadrature Encoder Pulse) block from encoder pulse. 3-Phase currents ares processed through C28x ADC block from current sensors. And gating signal of PWM inverter is generated through SVPWM and PWM block. Real-time program is drawn using SIMULINK and then converted program code for speed control of PMSM is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of the proposed vector control implementation.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.208-209
• /
• 2017

When controlling a three-phase inverter that drives AC motor, it is important to know the value of the current. In this case, shunt sensing methods are known as low cost and useful performance. However, for certain swithcing condition, immeasurable areas exist and it is necessary to reconstruct the current in the area. This paper proposes a reconstruction method using voltage injection in synchronous coordinates system at the area, and verify the validity of the method through simulation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.215-220
• /
• 2000

본 논문에서는 SRM운전에서 맥동토오크와 부하토오크의 변화로 인한 속도변경을 줄이기 위해 동적 도통각 제어 원리를 이용한 PLL(Phase Locked Loop) 속도제어 방식을 채택하였다. SRM은 많은 장점을 가지고 있으나 토오크리플에 따른 속도변동으로 정밀한 속도제어에 어려움이 있다. SRM 구동 시스템에 PLL을 적용한 결과 전동기는 강인한 정속도 운전을 할 수 있으며, 또한 운전속도에 따라 선행각을 조정함으로서 고효율 구동을 할 수 있었다. 구성된 시스템은 운전속도와 부하의 변화에 따라 선행각이 증가함으로써 뛰어난 동적 속도제어 특성을 갖고 있으며, 인버터 인가전압을 제어하는 선행각을 조정함으로서 일정부하 영역에서 높은 효율특성을 가진다. SRM 구동 시스템의 PLL 속도제어와 고효율 구동을 위한 도통각제어를 위해 TMS320F240 DSP를 사용함으로서 디지털 제어기의 유연성과 소형화를 꾀하였다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.3-5
• /
• 1995

For a linear induction motor(LIM), the constants of each phase are different due to the structure. In this paper, a vector control analysis method of a LIM taking into consideration its asymmetrical constants are proposed. And, in order to prove the propriety of proposed vector control method and to analyze the dynamic characteristics of LIM's vector control, FEM taking into account of movement and using stator tapped winding is used in the analysis region. So, It is confirmed that the proposed asymetrical constants vector control theory and simulation method of mixing with FEM is appropriate to dynamic characteristics analysis of LIM.

• Journal of Power System Engineering
• /
• v.17 no.4
• /
• pp.139-146
• /
• 2013

Because the magnetic bearing supports levitating body without contact, wear, noise and vibration, it is very useful to high revolution machinery. In this paper we selected ATmega 128, a less expensive and widely used micro controller, for control the magnetic bearing system. And we selected the sampling time and the control gain of PID controller through trial-and-error. The control program of the one board controller utilized lookup table to reduce calculation time, and bit shifting for the integer calculation in instead of floating point calculation. As the results, the controller carried out relatively high speed PID control on sampling time 0.25 ms. At last the rotation test for the magnetic bearing system was carried out by 3 phase induction motor and air turbine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.12 no.2
• /
• pp.74-80
• /
• 2008

The feasibility study into the development of turbine spinners, which start up the turbo-pump, has been carried out and the design requirements and parameters ranges have been presented. Turbine spinners use the solid propellant as such composite propellant based AN compound with high energy plasticizers, coolants, and phase stabilizer which relieves a sensible volume change due to the phase transformation of AN near room temperature. Propellants which have a homing rate of $0.2{\sim}0.3\;mm/s$ and pressure exponent ranged from 0.3 to 0.6, showed stable burn-out in the standard motor tests. Both the magnitude of ignition energy and its thermal transfer mechanism have been proved to have a tangible effect on the ignition of the pyre starter, and the results of this study showed that a flame temperature of 1400K would be quite adequate to get a stable ignition for the AN composite propellant.