• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.195-195
• /
• 2004

Conventional dryer systems use one induction motor to drive drum and fan. However, nowadays, dryer systems are necessary to use extra fan motor for reducing a drying-time. This fan motor should be variable-speed controlled motor to control drying-time according to the volume of clothes. This paper proposes 3-phase SRM(Switched Reluctance Motor) having 12/8 structure for variable-speed fan motor of dryer system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2176-2179
• /
• 2002

This paper introduces a hybrid induction motor control using a genetically optimized pseudo-on-line method. Optimization results from the use of a look-up table based on genetic algorithms to find the global optimum of a un-constraint optimization problem. The approach to induction motor control includes a pseudo-on-line procedure that optimally estimates parameters of a fuzzy PID (FPID) controller. The proposed hybrid genetic fuzzy PID (GFPID) controller is applied to speed control of a 3-phase induction motor and its computer simulation is carried out. Simulation results show that the proposed controller is performs better than conventional FPID and PID controllers. The contribution of this paper is the introduction of a high performance hybrid form of induction motor control that makes on-line and real-time control of the drive system possible.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제48권2호
• /
• pp.75-82
• /
• 1999

A compensation method of the motor parameters using zero sequence third harmonic voltage is presented for the speed sensorless vector control of the induction motor considering saturation of the flux. Generally, the air-gap flux of the saturated induction motor contains the space harmonic components rotating with the synchronous frequency of the motor. Because the EMF of the saturated induction motor contains the zero sequence harmonic voltages at the neutral point of the motor, those harmonic voltages can be used as a saturation index. In this work, the rotor flux observer is firstly designed for the speed sensorless vector control of induction motor. And a novel measurement method of the space harmonic voltage and a compensation method of th LPF(Low Pass Filter) are proposed. For compensating the non-linear variations of the magnetizing inductance depending on the saturation level of the motor, the dominant third harmonic voltage of the motor is used as a saturation function of the air-gap flux. And the variation of the stator resistance owing to the motor temperature can also be measured with the phase angle between the impressed voltage vector and the zero sequence voltage. The validity of the proposed parameter compensation scheme in the speed sensorless vector control using rotor flux observer is verified by the result of the simulations and the experiments.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제55권1호
• /
• pp.47-53
• /
• 2006

In this paper, a simple scheme compensating for the effect of dc-link ripple voltages on output voltage of two-leg and three-phase PWM inverters is proposed, where single-phase half-bridge PWM convertor and two-leg inverter are used. The voltage at neutral point of the dc-link is controlled so that the upper-half of do-link voltage is equal to the lower-half voltage in average concept. However, the effect of the do-link ripple voltage results in the inverter output voltage and current distortion. This effect can be eliminated by introducing a compensation voltage in switching time calculation. Also, the inverter dead time should be compensated for sinusoidal output waveform. The proposed scheme has been verified by experimental results which were obtained from the V/F constant operation of the induction motor fed by two-leg inverter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전력기술부문
• /
• pp.337-339
• /
• 2005

The purpose of this paper is to compensate the voltage drop of the power system in the AC High-Speed Railway (HSR). Reactive power compensation is often the most effective way to improve system voltage drop. The suitable modeling of the electric railway system should be applied to the EMTP. the dynamic characteristics of 3-Phase Induction Motor in Electric Railway Systems is considered for precise modeling. it is shown through EMTP simulation that voltage drop can be compensated effectively by STATCOM.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1986년도 하계학술대회논문집
• /
• pp.502-504
• /
• 1986

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권6호
• /
• pp.887-893
• /
• 2010

기관실 시뮬레이터에서 3상유도전동기에 대한 모델링을 단순하게 처리하는 경우에는 왜곡된 특성에 의해 각종 전기 기계적 모의 성능 수준이 크게 저하된다. 한편, 전동기 특성을 1, 2차 측 파라미터로 구분하는 기존의 등가회로 방식들은 복잡한 실험을 거치거나 상세 기술 자료가 확보되지 않고는 현장 전동기에 대한 회로에서의 파라미터 값들을 확정하지 못한다는 점에서 정격제원 정도만 주어지는 기관실 시뮬레이터의 개발 작업 환경에서는 사용할 수가 없다. 이러한 문제의 해결을 위해 본 논문에서는 최소 파라미터에 의한 전원 직결의 2 회로정수 방식 등가회로를 제시하였으며 이로부터 정격제원에 의해 회로정수가 결정되기까지의 조건과 과정 및 관련 식들을 해석하였다. 또한 실제 전동기에 이를 적용하여 얻어지는 특성곡선들을 통해 임의의 전동기에 대한 근사특성과 실용성을 확인하였다.

• 전기학회논문지P
• /
• 제58권3호
• /
• pp.241-248
• /
• 2009

This paper presents stochastic methodology based fault detection algorithm for induction motor systems. We measure current of healthy induction motors by means of hall sensor systems and then establish its probability distribution. We propose online probability density estimation which is effective in real-time implementation due to its simplicity and low computational burden. In addition, we accomplish theoretical analysis of the proposed estimation to demonstrate its convergence property by using statistical convergence and system stability theories. We apply our fault detection approach to three-phase induction motors and achieve real-time experiment for evaluating its reliability and practicability in industrial fields.

• 전기학회논문지
• /
• 제67권10호
• /
• pp.1298-1302
• /
• 2018

Minimum Efficiency Performance Standard (MEPS) has already been operated in many countries. In particular, the European Union (EU) has entered the IE3 stage since 2017. Korea will also enter the IE3 phase from October 2018. As for Korea, there is still a restriction on induction motors only. But, in the EU and the United States, efficiency regulation of variable speed drives is being deeply examined. Standards related to this are gradually being fixed. In this paper, the current status and the direction of global standards related to the efficiency of motors, inverters and systems are reviewed. And the case of improving the efficiency of the system including the motor will be examined.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1521-1523
• /
• 2005

PID controller is applied mostly to two-order system. In third-order or higher- system, it's impossible to get high response quality because of having more zero point than the number of zero point being in the PID controller. To solve those, Jung & Dorf suggested a new type of PIDA controller and solved problen of a third-order system.. But, as the result of getting step response using PIDA controller, rising time is very quickly but wide overshoot is happened. Beside designing PIDA controller with using CDM(Coefficient Diagram Method) of Shunji Manabe decreases overshoot to desired but rising time is very slow. Therefore this paper suggest a I-PDA controller for low overshoot and fast responsibility. This paper applied designed PD-PIDA controller to position control of 3-Phase induction motor.