• 한국해양공학회지
• /
• 제12권2호통권28호
• /
• pp.121-129
• /
• 1998

A quantitative non-contact multi-point measurement system is proposed to the measurement of three-dimensional movement of floating vessels by using digital image processing. The instantaneous three-dimensional movement of a floating structure which is floating in a small water tank is measured by this system and its three-dimensional movement is reconstructed by the measurement results. The validity of this system is verified by position identification for spatially distributed known positional values of basic landmarks set for the camera calibration. It is expected that this system is applicable to the non-contact measurement for an unsteady physical phenomenon especially for the measurement of three-dimensional movement of floating vessels in the laboratory model test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.729-734
• /
• 2008

A thermal stratification may occur in the horizontal parts of the surge line during operating transients of the pressurizer, which produces relatively high fatigue usage factor. Heat-up transient is the most severe case among the transient conditions. In this study, to study the relationship between the magnitude of thermal stratification and the length of vertical part of the surge line, some parametric fluid-structure interaction (FSI) analyses with different length variables of the vertical part of the surge line were performed for plant heat-up transient condition by using 3-dimensional numerical analysis. The conservativeness of the traditional finite element model for thermal stratification analysis based on the conservative assumption in the surge line was also discussed by comparison of the results of 3-dimensional transient FSI analysis of this study. Stresses calculated with 3-dimensional transient model were considerably reduced comparing with the traditional analysis.

• 센서학회지
• /
• 제15권3호
• /
• pp.153-157
• /
• 2006

This paper presents the method for three-dimensional micro structure with photoresist spray coating system. The system consists of a high temperature rotational chuck, ultrasonic spray nozzle module, angle control module and nozzle moving module. Spray coating system is effected by several parameters such as the solid contents, the dispensed volume, the scanning speed of the spray nozzle and the wafer of dimension. The photoresist (AZ 1512) has been coated on the three-dimensional micro structure by spray coating system and the characteristics have been evaluated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.131-134
• /
• 2001

The three-dimensional precision measurement technology for industry product of middle and/or large scale has been developed. Theodolite measurement system which is one of the technology is widely used in aerospace industry. This paper describes measurement method and results for spacecraft structure test model by using the measurement system. And structural stability for STM is desribed through the comparison between design values and measured values.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권2호
• /
• pp.126-135
• /
• 2011

In this study, numerical analysis was carried out by using the finite element method to construct the first mode shape of damaged stiffened plates, and the damage locations were detected with two-dimensional discrete wavelet analysis. In the experimental analysis, four different damaged stiffened structures were observed. Firstly, each damaged structure was hit with a shaker, and then accelerometers were used to measure the vibration responses. Secondly, the first mode shape of each structure was obtained by using the wavelet packet, and the location of cracks were also determined by two-dimensional discrete wavelet analysis. The results of the numerical analysis and experimental investigation reveal that the proposed method is applicable to detect single crack or multi-cracks of a stiffened structure. The experimental results also show that fewer measurement points are required with the proposed technique in comparison to those presented in previous studies.

• 콘크리트학회논문집
• /
• 제25권1호
• /
• pp.29-36
• /
• 2013

최근의 지진을 경험하면서 지진에 대한 성능 설계 개념이 설계기준에 포함되기 시작하였다. 따라서 RC 구조물의 강도와 연성을 예측할 수 있는 간단한 해석도구가 필요하다. 이 연구에서는 2차원 래티스 모델을 확장하여 3차원 래티스 모델을 개발하였다. 개발된 3차원 래티스 모델을 평가하기 위하여 구조물의 비틀림 해석을 수행하였다. 해석의 평가를 위하여 실험 결과와 비교하였다. 래티스 요소의 크기에 따른 해석 결과를 분석하여 사용성을 검토하였다. 개발한 3차원 래티스 모델을 사용한 비틀림 거동해석이 실험값과 비교적 일치하는 결과를 보여주었다.

• Korean Journal of Mathematics
• /
• 제22권1호
• /
• pp.207-216
• /
• 2014

The manifold $^*g-ESX_n$ is a generalized n-dimensional Riemannian manifold on which the differential geometric structure is imposed by the unified field tensor $^*g^{{\lambda}{\nu}}$ through the ES-connection which is both Einstein and semi-symmetric. The purpose of the present paper is to study the algebraic geometric structures of 3-dimensional $^*g-ESX_3$. Particularly, in 3-dimensional $^*g-ESX_3$, we derive a new set of powerful recurrence relations in the first class.

• 한국콘텐츠학회논문지
• /
• 제4권3호
• /
• pp.81-90
• /
• 2004

최근 컴퓨팅 환경의 급속한 발전으로 다양한 응용에서 다차원 데이터에 대한 활용이 증가되고 있다. 본 논문에서는 내용 기반 다차원 데이터 검색을 위한 벡터 관사 트리를 제안한다 제안하는 색인 구조는 공간 분할 방식과 벡터 근사화 기법을 이용하여 영역 정보를 표현하기 때문에 하나의 노드 안에 많은 영역 정보를 저장하여 트리의 높이를 감소시킨다 또한 다차원의 데이터 공간에 동적인 비트로 할당하여 다차원색인 구조의 문제점인 '차원의 저주 현상'을 해결한다. 또한 군집화된 데이터에 대해서 효과적인 표현 기법을 제공한다. 자식 노드의 영역 정보는 부모 노드를 기준으로 상대적으로 표현함으로서 좀더 정확한 영역을 표현할 수 있다. 제안하는 색인 구조의 우수성을 보이기 위해 실험을 통해 기존에 제안된 색인구조와의 비교 분석을 수행한다.

• 대한기계학회논문집A
• /
• 제28권3호
• /
• pp.296-303
• /
• 2004

Recently, the ultra light metal structure with periodic and three dimensional truss elements takes attention because of its multi-functionality and substantial heat resistance. However, the complicated fabrication process leading to high cost has been a major obstacle to wide applications. In this paper, a new idea to construct an ultra light structure with periodic, three dimensional truss using metal wires is presented. To prove the practical validity, a Kagome-like structure was fabricated from stamped wires and punched face sheets. It was assembled by soldering. Through three-point bending and compression tests, the strength was evaluated and compared with the theory.

• Korean Journal of Mathematics
• /
• 제23권2호
• /
• pp.313-321
• /
• 2015

The manifold $^*g-ESX_n$ is a generalized n-dimensional Riemannian manifold on which the differential geometric structure is imposed by the unified field tensor $^*g^{{\lambda}{\nu}}$ through the ES-connection which is both Einstein and semi-symmetric. The purpose of the present paper is to prove a necessary and sufficient condition for a unique Einstein's connection to exist in 3-dimensional $^*g-ESX_3$ and to display a surveyable tnesorial representation of 3-dimensional Einstein's connection in terms of the unified field tensor, employing the powerful recurrence relations in the first class.