• Journal of Information Technology Applications and Management
• /
• v.14 no.3
• /
• pp.179-197
• /
• 2007

This paper analyzed the effects of interactions among participants on the satisfaction and commitment of cyber education. Even if the quality of interactions in cyber education may not be so good as that of interactions in face to face education. various kinds of interactions could be introduced in cyber education. An email or Q/A between lecturer and students could be a good way to compensate the deficiency of cyber education. Common News Boards or Discussion Rooms among students themselves are also a powerful means to learn each other in cyber space. The result of this study shows that as interactions among participants increase. satisfaction and commitment of the lecture also increase. This study also analyzed how cyber educational effects differs as interaction type changes in space dimension and time dimension. The result shows interactions in the same cyber space such as News Board brings more desirable outcome than those in the different cyber space. But the effects of interactions classified by time dimension does not show statistically significant differences.

• Journal of Korean society of Dental Hygiene
• /
• v.22 no.4
• /
• pp.225-230
• /
• 2022

Objectives: Patients with excessive tooth wear should first be diagnosed for the etiology of the tooth wear. Causes of tooth wear include bruxism, clenching, and taking medications for systemic diseases. After identifying the cause of tooth attrition, the final prosthesis should be restored with an appropriate vertical dimension. Methods: A 79-year-old man with worn out teeth desired a whole dental treatment. He was on medications for high blood pressure and asthma. The treatment proceeded with a consultation with a medical doctor. The medications for asthma evoked multiple teeth wear and a loss of the vertical dimension. After recovery of 3 mm of vertical dimension, 2 months of evaluation was followed by an interim prosthesis. Results: The increased vertical dimension caused no problem in function and esthetics, and the final restoration was performed with a full monolithic zirconia crown. Group function, adequate anterior guidance, and the occlusal plane were determined. Conclusions: After the final restoration, the patient was both esthetically and functionally satisfied, and a night guard splint was delivered to prevent prosthesis fracture. The patient was informed about the potential tooth wear associated with asthma drugs and educated to visit the clinic regularly.

• Clinics in Shoulder and Elbow
• /
• v.25 no.3
• /
• pp.173-181
• /
• 2022

Background: Healing of the tendon itself is not always related to successful clinical outcomes after rotator cuff repair. It was hypothesized that certain radiologic factors affecting clinical outcomes could exist in case of the retear after arthroscopic rotator cuff repair (ARCR) and the radiologic factors could help predict clinical process. The purpose of this study was to identify the radiologic factors associated with clinical outcomes of the retear after ARCR. Methods: Between January 2012 and December 2019, among patients with sufficient footprint coverage for ARCR, 96 patients with Sugaya classification 4 or higher retear on follow-up magnetic resonance imaging were included. The association between clinical outcomes such as American Shoulder and Elbow Surgeons (ASES) score, Constant score and range of motion and radiologic variables such as initial tear dimension, retear dimension, variance of tear dimension, critical shoulder angle, acromial index, and acromiohumeral distance was analyzed. Results: Preoperatively, the ASES and Constant scores were 59.81±17.02 and 64.30±15.27, respectively. And at the last follow-up, they improved to 81.56±16.29 and 78.62±14.16, respectively (p<0.01 and p<0.01). In multiple linear regression analysis, the variance of the mediolateral dimension of tear had statistically significant association with the ASES and Constant scores (p<0.01 and p=0.01). Conclusions: In patients with the retear after ARCR, the variance in the mediolateral dimension of tear had significantly negative association with the clinical outcomes. This could be considered to be reference as relative criteria and needed more sample and mechanical study.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.6
• /
• pp.1016-1026
• /
• 1996

The purpose of this study was to extract protypes from features and concrete images of Lotus and Crane patterns. A qualitative and a quantitative methods were used. Qualitative informations were obtained from depth Interviews for pattern selection and feature extraction, and quantitative informations from a quail-experiment for pattern caregorization. The subjects were 20 female design students and non-design, students in Teajon. The results were summerized into a similarity metrix which was interpreted by the cluster analysis and the multi-dimensional scling(MDS). The patterns for the study were grouped into 8 clusters. Four dimensions were chosen for the MDS. The location of each pattern was visualized in a 2-dimesional spaces and the location of each cluster in a 3-dimensional spaces. The first dimension, "Lotus" vs "Crane" refired to pattern types, and the second dimension, "realistic" vs "transformable", the transformability. The third dimension, "simple" vs "complex", refired to the degree of simplification, and the forth dimension, "continuous" vs "discontinuous", continuity. The results of the Quantitative analysis could be summerized into 3-level prototype hiararchy In the first level, the patterns were devided clearly into two groups. Lotus and Crane by pattern types. In the second levelk, each group was devided into twosubgroups by continuity. In the third, each subgroup was divided into four subgroups by transformability and the degree of simplification. Four protypes, the final targets of the present study, were extracted from the third level. The are Stylized, Realistic, Decorative, Abstract types.d from the third level. The are Stylized, Realistic, Decorative, Abstract types.

• Computers and Concrete
• /
• v.2 no.3
• /
• pp.239-248
• /
• 2005

The article presents the results of examination of the fractal dimension D of concrete specimen fracture surfaces obtained in fracture toughness tests. The concretes were made from three different types of coarse aggregate: gravel, dolomite and basalt aggregate. Ordinary concretes (C40) and high-performance concretes (HPC) were subjected to testing after 7, 14, 28 and 90 days of curing, respectively. In fracture toughness and compressive tests, different behaviours of concretes were found, depending on the type of aggregate and class of concrete (C40, HPC). A significant increase in the strength parameters tested occurred also after a period of 28 days (up to the $90^{th}$ day of curing) and was particularly large for concretes C40. Fractal examinations performed on fracture replicas showed that the fractal dimension D was diverse, depending on the coarse aggregate type and concrete class being, however, statistically constant after 7 and 14 days for respective concretes during curing. The fractal dimension D was the greater, the worse strength properties were possessed by the concrete. A cross-grain crack propagation occurred in that case, due to weak cohesion forces at the coarse aggregate/mortar interface. A similar effect was observed for C40 and HPC made from the same aggregate. A greater dimension D was exhibited by concretes C40, in which case the fracture was easier to form compared with high-performance concretes, where, as a result of high aggregate/mortar cohesion forces, the crack propagation was of inter-granular type, and the resulted fracture was flatter.

• Structural Engineering and Mechanics
• /
• v.20 no.3
• /
• pp.265-277
• /
• 2005

This paper is focused on fractal analysis of the surface cracking, a new tool for safety evaluation of corroded reinforced concrete (RC) beams. Comprehensive experimental investigations, including flexural tests, coupon tests on strength evaluation of corroded concrete and rusty rebar, and pullout tests to determine bond strength between concrete and rebar were carried out on nine Corroded Reinforced Concrete Beams (CRCB) exposed to an aggressive environment for more than 10 years. In combination with test results from a previous study on CRCBs fabricated in the laboratory from accelerated methods, it is found that, for both types of beams, the surface cracking distributions are fractal in character at loading and failure stages. Fractal dimension is calculated for all specimens at different corrosion states based on fractal analysis method. Relationships between the fractal dimension and mechanical properties of corroded concrete, rebar corrosion ratio, and ductility of CRCBs are discussed in detail. It is concluded that the fractal dimension can act as a damage index and can be efficiently used to describe the corrosion state of CRCBs.

• Journal of Korean Academy of Nursing
• /
• v.38 no.4
• /
• pp.573-581
• /
• 2008

Purpose: The purpose of this study was to investigate the relationships among quality of sleep, depression, late-life function and disability in community-dwelling older women with urinary incontinence. Methods: A stratified random sampling method was conducted to recruit participants from May 10 to August 17, 2007. Data were collected by questionnaires, which were constructed to include lower urinary tract symptoms, quality of sleep, depression, and late-life function and disability in 128 community-dwelling older women. Results: The major findings of this study were as follow: 1) 56.3% of participants belonged to urinary incontinence group. 2) There were significant relationships between depression and sleep latency, sleep duration, daytime dysfunction, quality of sleep, function component, frequency dimension, and limitation dimension. 3) Depression was significantly associated with frequency dimension, limitation dimension in capability which explained 44% of variance in depression. Conclusion: These results may contribute to a better understanding of sleep quality, depression, late-life function and disability in the community-dwelling older women with urinary incontinence. Therefore, health programs for prompting older women's health should be planned based on results of the study.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.238-244
• /
• 2017

Pathologic attrition leads to pathologic damage on occlusal plane, functional disorders, occlusal disharmony, esthetic problems, pulpal lesion, temporomandibular joint (TMJ) disorder. In this case, treatment plan should be considered for possibility of vertical dimension loss, occlusal pattern, esthetics, phonetics, amount of vertical dimension increase. This case report was a 71-year-old man who had severely worn dentition. Full mouth rehabilitation was carried out with vertical dimension increase due to limited space for prosthesis. After evaluation of provisional restorations for patient's compliance, final restorations were fabricated and routine clinical assessments were made. This case presents that a satisfactory clinical result was achieved by restoring the worn dentition.

• The Mathematical Education
• /
• v.55 no.4
• /
• pp.397-416
• /
• 2016

This study analyzed the quality of mathematics classes with observations using the instrument, MQI(Mathematical Quality of Instruction). Class recordings and interviews were conducted on 2 pre-service teachers and 4 in-service teachers. This study recorded and analyzed 3 or 4 classes for each mathematics teacher by using revised MQI. There were a total of 8 raters: 2 or 3 raters analyzed each class. MQI has four dimensions: Richness of the Mathematics, Working with Students and Mathematic, Errors and Imprecision, Student Participation in Meaning-Making and Reasoning. In the dimension of 'Richness of Mathematics', all teachers had good scores of 'explanations of teacher' but had lower scores of 'linking and connections', 'multiple procedures or solution methods' and 'developing mathematical generalizations.' In the dimension of 'Working with Students and Mathematics', two in-service teachers who have worked and having more experience had higher scores than others. In the dimension of 'Errors and Imprecision', all teachers had high scores. In the dimension of 'Student Participation in Meaning-Making and Reasoning', two pre-service teachers had contrast and also two in-service teachers who hadn't worked not long had contrast. Implications were deducted from finding to improving quality of mathematics classes.

• Journal of Educational Research in Mathematics
• /
• v.13 no.1
• /
• pp.57-75
• /
• 2003

The goal of this paper is to offer material which make mathematising Fruedenthal(1991) proposed be experienced through the process of teaching and learning mathematics. In this paper, the number of unit squares a diagonal passes through for an m$\times$n lattice rectangle is studied and its generalization is discussed. Through this discussion, the adaptability of this material Is analysed. Especially, beyond inductional conjecture, the number of unit squares is studied by more complete way, and generalization in 3-dimension and 4-dimension are tried. In school mathematics, it is enough to generalize in 3-dimension. This material is basically appropriate for teaching and learning mathematising in math classroom. In studying the number of unit squares and unit cubes, some kinds of mathematising are accompanied. Enough time are allowed for students to study unit squares and unit cubes to make them experience mathematising really. To do so, it is desirable to give students that problem as a task, and make them challenge that problem for enough long time by their own ways. This material can be connected to advanced mathematics naturally in that it is possible to generalize this problem in n-dimension. So, it is appropriate for making in-service mathematics teachers realize them as a real material connecting school mathematics and advanced mathematics.