• The Journal of the Korean dental association
• /
• v.54 no.2
• /
• pp.134-141
• /
• 2016

Use of ready-made orthodontic appliance can lead to inefficiencies in the final stages of the orthodontic treatment. Because patients' teeth have anatomic variations, brackets that have been designed to fit on average tooth surface may result in positional discrepancies when leveling and alignment is completed. As a result, additional steps such as rebonding, wire bending and use of auxiliaries may be needed. Even in patients who have normal tooth anatomy and proper tooth size relationships, precise bracket placement is crucial in order to efficiently control the tooth positions. Digital models can provide advantages in clinical orthodontics as virtual tooth setup could be performed, and clinicians can easily visualize the predicted final occlusion. Through this setup model, customized brackets with individualized prescription and archwires that optimally fit with the patients' dental arches can be produced using CAD/CAM technology. Also, the brackets can be accurately placed with an aid of 3D-printed jigs. The purpose of this article is to introduce the commonly used labial and lingual customized orthodontic appliance systems using digital technology.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.7
• /
• pp.2097-2108
• /
• 2014

Chemical feature based quantitative pharmacophore models were generated using the HypoGen module implemented in DS2.5. The best hypothesis, Hypo1, which was characterized by the highest correlation coefficient (0.96), the highest cost difference (61.60) and the lowest RMSD (0.74), consisted of one hydrogen bond acceptor, one hydrogen bond donor, one hydrophobic and one ring aromatic. The reliability of Hypo1 was validated on the basis of cost analysis, test set, Fischer's randomization method and GH test method. The validated Hypo1 was used as a 3D search query to identify novel inhibitors. The screened molecules were further refined by employing ADMET, docking studies and visual inspection. Three compounds with novel scaffolds were selected as the most promising candidates for the designing of Mcl-1 antagonists. Finally, a 10 ns molecular dynamics simulation was carried out on the complex of receptor and the retrieved ligand to demonstrate that the binding mode was stable during the MD simulation.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.145-154
• /
• 2015

This study aims to identify the differences of body image when the stripe direction and width change of semi-tight skirt. The semi-tight skirt pattern was made using the standard size of a women in their 20s. 12 semi-tight skirt models combining 6 kinds of stripe directions and 2 kinds of stripe widths were made using CLO 3D virtual clothing system. The data was evaluated by 126 fashion design majors. The results were as follows; In accordance with the body image factor analysis of semi-tight skirt, three image factors were identified; whole body optical illusion, calf optical illusion and hip optical illusion. Among these factors, the whole body optical illusion factor is the most important factor. The body image depending on the stripe direction and width change of semi-tight skirt mostly showed the significant difference. In accordance with the analysis on the interaction effect of body image depending on the stripe direction and width change of semi-tight skirt, the whole body, calf and hip optical illusion factors showed the significance. The interaction of body image had independent influence on all factors of stripe direction and width. In particular, the interaction of stripe direction and width had the most significant influence on the whole body optical illusion.

• Earthquakes and Structures
• /
• v.13 no.5
• /
• pp.509-518
• /
• 2017

The objective of the present paper is to investigate the bending behavior with stretching effect of carbon nanotube-reinforced composite (CNTRC) beams. The beams resting on the Pasternak elastic foundation, including a shear layer and Winkler spring, are considered. The single-walled carbon nanotubes (SWCNTs) are aligned and distributed in polymeric matrix with different patterns of reinforcement. The material properties of the CNTRC beams are estimated by using the rule of mixture. The significant feature of this model is that, in addition to including the shear deformation effect and stretching effect it deals with only 4 unknowns without including a shear correction factor. The single-walled carbon nanotubes (SWCNTs) are aligned and distributed in polymeric matrix with different patterns of reinforcement. The material properties of the CNTRC beams are assessed by employing the rule of mixture. The equilibrium equations have been obtained using the principle of virtual displacements. The mathematical models provided in this paper are numerically validated by comparison with some available results. New results of bending analyses of CNTRC beams based on the present theory with stretching effect is presented and discussed in details. the effects of different parameters of the beam on the bending responses of CNTRC beam are discussed.

• Journal of the Korea Computer Graphics Society
• /
• v.15 no.2
• /
• pp.19-34
• /
• 2009

This paper presents an automatic rendering system for 3D meshes which generates images in the style of oriental black ink painting. In this paper, we analyze the characteristics of black ink painting and present some requirements for our black ink rendering system. Then we survey the steps used by artists to create black ink paintings. Based on the analysis of drawing steps, we propose a black ink rendering system which reproduces the key features of black ink painting through three sub-systems: the feature line layer, the interior shading layer, and the media layer. The main contribution of this paper is to introduce new methods which generate realistic and natural results very fast while any simulation methods are not used to satisfy real-time performance. We describe our implementation of each of these, and demonstrate our results in the major three styles of black ink painting: the outline style, the spontaneous style, and the outline-spontaneous style. Our system renders 3D models of moderate complexity at interactive frame rates. As a result, we expect that our system can be directly applied to real-time applications such as computer games and virtual environments.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.406-409
• /
• 2022

In recent years, the developments in technologies, such as AI systems, Blockchain, VR/AR, 3D printing, robotics, and nanotechnology, are reshaping the future of healthcare right before our eyes. And also, healthcare has seen a paradigm shift towards prevention-oriented medicine, with a focus on consumers requirements. The spread of infectious diseases such as Covid-19 have altered the definition of healthcare and treatment facilities, necessitating immediate action to redesign hospitals' physical environments, adapt communication models to address social distancing requirements, implement virtual health solutions, and establish new clinical protocols. Hospitals, which have traditionally served as the hub of healthcare systems, are pursuing or being forced to reestablish themselves against this landscape. Rather than only treating ailments, future healthcare is predicted to focus on wellness and prevention. In personalized care, long-term prevention strategies, remote monitoring, early diagnosis, and detection are critical. Given the growing interest in smart healthcare defined by these modern technologies, this study looked into the definitions and service kinds of smart healthcare. The background and technical aspects of smart hospitals were also explored through a literature review.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.12
• /
• pp.682-691
• /
• 2004

We present a novel haptic sculpting system where the user intuitively adds to and carves out material from a volumetric model using new sculpting tools in the similar way to handling real clay Haptic rendering and model deformation are implemented based on volumetric implicit surface. We enhance previous volume-based haptic sculpting systems by presenting fast and stable force computation on 3D models to be deformed. In order to bridge the gap between fast haptic process (1 KHz) and much slower visual update frequency(~30Hz), the system generates intermediate implicit surfaces between two consecutive physical models being deformed. It performs collision detection and force computation on the intermediate surface in haptic process. The volumetric model being sculpted is visualized as a geometric model which is adaptively polygonized according to the surface complexity. We also introduce various visual effects for the real-time sculpting system including mesh-based solid texturing, painting, and embossing/engraving techniques.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.286-293
• /
• 2022

Recently, the importance of elemental technologies constituting smart factories is increasing due to the 4th Industrial Revolution, and simulation is widely used as a tool to learn these technologies. In particular, PID control is an automatic control technique used in various fields, and most of them analyze mathematical models in certain situations or research on application development with built-in controllers. In actual educational environment requires PID simulator training as well as PID control principles. In this paper, we propose a model that enables education and practice of various PID controls through 3D simulation. The proposed model implemented virtual balls and Fan and implemented PID control by configuring a system so that the force can be lifted by the air pressure generated in the Fan. At this time, the height of the ball was expressed in a graph according to each gain value of the PID controller and then compared with the actual system, and through this, satisfactory results sufficiently applicable to the actual class were confirmed. Through the proposed model, it is expected that the rapidly increasing elemental technology of smart factories can be used in various ways in a remote classroom environment.

• The Journal of the Korea Contents Association
• /
• v.10 no.5
• /
• pp.416-421
• /
• 2010

The KISTI (Korea Institute of Science and Technology Information) began to produce the Korean human information called Visible Korean and Digital Korean since 2000 because there was no human information in Korea which could represent the physical characteristics of Korean human body. The Visible Korean consists of CT, MR, sectioned and segmented images of Korean human body. We obtained the serially sectioned images by grinding the Korean cadaver in horizontal direction and segmented these images by outlining the inner organs of human. We have produced the sectioned images of Korean male whole body, male head, and female pelvis in2008. The segmentation and 3D reconstruction of these images are now in proceeding. The Digital Korean consists of CT images of about 100 Korean cadavers. These CT images were segmented by individual bone, reconstructed to produce the 3D bone models and the skin surface model was also added. The mechanical properties of individual bones were obtained by measuring the property of individual bone sample. We have distributed these Korean human informations to users in domestic and abroad. About 70 institutes in domestic, and 20 institutes in abroad have used our data in research use and nearly 160 proceedings and articles were published since 2001. We think these human informations have a role of medical information infrastructure that could be used in the field of medical education, biomechanics, virtual reality etc.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.552-557
• /
• 2020

The Radar Cross Section (RCS) is a virtual region indicating the strength of a wavelength at which a radar signal is reflected and received. As the ship's RCS represents its own stealth performance and survivability, efforts have been made in various areas from design to construction to reduce the RCS. The RCS can be predicted using design drawings and CAD models, but it is necessary to measure the RCS at sea since sea clutter and multipath reflections occur in the sea environment. However, such RCS predictions and measured values provide only a simple relative magnitude to the user, and there has not been much research on this topic. In this paper, a missile countermeasure technique was studied using 3D RCS measurement data in an operating environment. The elevation and azimuth angle of the ship viewed from the missile were estimated using the location information of the missile, and the RCS value was inverted by mapping it to previously measured 3D RCS measurement data. In addition, by using the movement information of the missile, the RCS observed by the missile could be predicted in advance, and this method can be used to propose a response plan based on the maneuvering and chaff system.