• 자원환경지질
• /
• 제31권2호
• /
• pp.127-139
• /
• 1998

직접, 반사, 굴절파에 의한 3차원 속도구조를 위한 동시역산기술을 포항, 경상분지, 영남육괴 등 한반도 남부지역에 응용하였다. 44개 지진의 총 554개 지진 파선의 Pg, Sg, PmP, SmS, Pn, 그리고 Sn 위상의 주행시간은 진앙과 지각구조를 계산하기위해 사용하였다. 토모그래피 역산을 위해 수평으로는 $0.5^{\circ}$의 grid로 이루어진 $6{\times}6$ 블록과 수직으로 4 km 두께의 8개층으로 이루어진 블록모델을 사용하였다. 3차원 속도 토모그래피 역산 결과 모호면에서 지표까지 8개층으로된 속도 깊이의 단면도를 작성하였으며, 수평속도분포는 위도와 경도별로 10개 수평속도 분포도를 작성하였다. 그 결과는 다음과 같다. 1) 본 연구지역에서 퇴적암의 평균 속도는 5.04 km/sec, 두께는 3~4 km. 기반암의 평균속도는 6.11 km/sec임을 알았다. 그리고 천부층의 속도 변화는 남부지역을 대상으로 관측한 부우게 중력이상(Cho et al., 1997)과 일치하는 것을 알았다. 2) 상부지각에의 수평 속도분포는 변화가 매우 크며 콘라드 밑의 하부지각의 수평 속도분포는 거의 일정함을 알았다. 3) 모호면의 평균깊이는 30.4 km, 평균속도는 8.01 km/sec로 나타났다. 4) 퇴적층의 속도와 두께, 상부지각의 두께, 속도 그리고 모양, 모호면의 깊이와 모양 등에서 영남육괴, 경상분지, 그리고 포항분지의 차이를 명백히 찾을 수 있었다. 5) 경주, 포항지역 부근의 심부단층이 상부지각의 하부까지 연장된 정단층 또는 트러스트 단층임을 알았다.

• 물과 미래
• /
• 제28권6호
• /
• pp.183-191
• /
• 1995

하천의 홍수유속을 측정하기 위하여, 전자파를 이용한 물 표면 유속 측정체계를 개발하였다. 현재의 개발단계는 실험용 유속측정체계 수준이다. 전자파 표면유속계는 초고주파(micro-wave) 전자파의 도플러 효과를 이용한다. 이는 전자파의 발진과 안테나를 통한 반사파 수신, 차주파수 신호의 추출로 이루어지는 RF부분과, 차주파수 신호의 A/D변환 및 고속 후리에 변환 등으로 이루어지는 신호처리부로 구성된다. 구성된 유속측정 체계로 교량 아래 유속, 대청 조정지댐 방수로 등에서 측정 실험하였고 선박해양공학 연구센터의 선박 실험용 선형수조에서 검증 실험을 수행하였다. 검증결과 A/D 변환기 제작오류에서 발생된 4% 오차 이외에 측정환경의 문제에서 비롯된 몇 %의 오차가 혼재되어 있음이 분석되었다. 그러나 0.5~3.5 m/s 유속을 측정한 결과, 기준속도와 측정속도간 선형성이 우수하고 홍수 유속 측정에 매우 유용한 장비임이 입증되었다. 향후 소형화, 경량화를 수행하고 바람, 물 표면의 불규칙 유동에 의한 영향을 분석하여 신호처리 방안을 마련하는 재제작 (re-engineering) 과정이 요구된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.601-607
• /
• 1998

This paper presents the efficient 2-D linear brake analysis model which can compensate the lateral leakage flux by changingng the airgap length and magneto-motive force(MMF). The linkage flux of the 2-D analysis is larger than that of 3-D analysis. This is caused by the assumption in 2-D analysis that geometric and physical values are constant along the perpendicular direction(z) to the analysis region. The equivalent MMF have been calculated from the linkage flux difference between the 2-D and 3-D analyses which are performed at zero velocity. The performances of the linear brake have been analyzed effectively by using the compensated 2-D models without using 3-D FEM.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.200-213
• /
• 1993

A model experiment on a midwater rope trawl net which is used in the North Pacific to catch alaska pollack is carried out in the circulating tank to examine the basic efficiency of the net. The prototype is the net used by M/S Hanil(1, 179GT, 2, 700PS), a Korean trawler. The model net was made according to the Tauti's Similarity Law of Fishing Gear in 1/100 scale by considering the condition of the tank. To measure the basic efficiency of the standard model net, the vertical opening and width between some points marked on the net were measured, and the hydrodynamic resistance were determined. Then the constructive conditions of the net were varied as follows and the factors were measured again to compare the efficiency of those nets with that of the standard net(A-1 type) front weight multiplied 1.5 times: A-2 type. buoyancy and depressing force multiplied 1.7 times: A-3 type. front weight multiplied 1.5 times on A-3 type: A-4 type. depressors rigged at ground rope: B type. cod-end stuffed with cashmylon wad: C type. The results obtained can be summarized as follows: 1. The vertical opening at the center of head rope was steeply decreased with the flow velocity increasing and the vertical opening H(m) can be expressed in H=1.2v super(-1.2)(v : flow velocity in m/sec). The width of the net varied a little when the flow velocity was over 0.4m/sec, and the width of net mouth showed about 37% of the distance between the fore tips of net pendant. The shape of net mouth was almost a circle at 0.2m/sec and then steeply flatted elliptically with the flow velocity increasing and the area of mouth S(m super(2)) can be expressed in S=(1.65-2.3v)$\times$10 super(-2). The hydrodynamic resistance of the net increased almost linearly with the flow velocity increasing and the resistance R(kg) can be expressed in R=3.2$\times$d/l$\times$abv. where d/l denotes the mean of d(diameter of netting twine) and l(length of a leg in a mesh) from wing tip to the end of bag-net except cod-end on the side pannel, and a denotes the strectched circumference of the net at the fore end of a meshed part and b the stretched length of the whole net from wing tip to the end of cod-end. 2. In the condition-varied nets, the vertical opening of head rope showed some increase in every type net except the C type, and the increase showed the greatest in the B type by 30~54%, whereas it showed decrease in the C type by 5~10%. Variation of the area of net mouth showed almost the same tendency as the vertical opening and the increase showed the greatest in the B type by 20%, whereas it showed decrease in the C type by 12%. Hydrodynamic resistance showed some increase in every type compared with the standard net, and the rate of increase indicated 5~10% in the A-2, A-3 and A-4 type, 22% in the B type and 3% in the C type.

• 융복합기술연구소 논문집
• /
• 제1권1호
• /
• pp.34-40
• /
• 2011

In this paper, a hybrid design tool combining one-dimensional(1D) lumped model and three-dimensional computational fluid dynamics(CFD) approach has been developed in order to evaluate the performance of inkjet print head and droplet control process are studied to reduce the deviations between nozzles which affect the size of the printed line for the industrial application of direct writing on printed circuit boards(PCB). 1D lumped model analysis shows that it is useful tool for evaluating performance of an inkjet head by varying the design parameters. The differences in ejected volume and droplet velocity between analytical and experimental result are within 12%. Time sequence of droplet generation is verified by the comparison between 3D analysis result and photographic images acquired by stroboscopic technique. In addition, by applying DPN process, velocity and volume uniformity between nozzles is dramatically improved that the tolerance achieved by the piezoelectric inkjet printhead across the 64 nozzles is 5 to 8%. A printed line pattern is successfully obtained using the fabricated inkjet print head and droplet calibration system.

• Wind and Structures
• /
• 제38권6호
• /
• pp.445-459
• /
• 2024

To model the aeroelasticity in vortex-induced vibrations (VIV) of slender tubular towers, this paper presents an approach where the aerodynamic damping distribution along the height of the structure is calculated not only as a function of the normalized lateral oscillation but also considering the local incoming wind velocity ratio to the critical velocity (velocity ratio). The three-dimensionality of aerodynamic damping depending on the tower's displacement and the velocity ratio has been observed in recent studies. A contour map model of aerodynamic damping is generated based on the forced vibration tests. A sectional calculation procedure based on the spectral method is developed by defining the aerodynamic damping locally at each increment of height. The proposed contour map model of aerodynamic damping and the sectional calculation procedure are validated with full-scale measurement data sets of a rotorless wind turbine tower, where good agreement between the prediction and measured values is obtained. The prediction of cross-wind response of the wind turbine tower is performed over a range of wind speeds which allows the estimation of resulting fatigue damage. The proposed model gives more realistic prediction in comparison to the approach included in current standards.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.64-69
• /
• 2006

At starting point, 1D velocity models were inverted by using 430 events with P-wave 5147, S-wave 3729 from KIGAM, KMA, KEPRI, and KINS's seismic networks. A minimum 1D model shows that P-wave velocities are around $6.0{\pm}0.5\;km/s$ slowly increasing with depth between surface and 15 km. The velocities are about $6.4{\pm}0.2\;km/s$ below 15km to 35km. The earthquake data number for 3D tomography was 630 adding to previous 430 events with limitation of more than 6 station detection and relocation stability of location. The checkerboard test shows that only upper curst part from surface to 17 km have reliable resolution. The results of upper crust part present that the boundary of Gyeong-sang basin and Youngnam massif is mach well velocity variation pattern. The western part of the basin is shown as lower velocity and south-eastern part as higher. This is because that sedimentary rocks are widely located around western part of the basin and volcanic origin rocks are distributed around south-eastern part.

• 한국전산유체공학회지
• /
• 제16권2호
• /
• pp.56-61
• /
• 2011

Numerical study is conducted to design the high temperature heat exchanger of Stirling engine by using the commercial CFD solver, FLUENT. The Fin-tube type of heat exchanger is designed as a reference model by considering the type of engine which is ${\beta}$-configuration. To find the optimal design of heat exchanger in heat transfer capacity numerical calculation is conducted by changing the shape, the number, and material of reference model in three-dimensional combustion field. Adjusted one-way constant velocity of working fluid that is helium is considered as the representative velocity of oscillating flow. The optimal design of heat exchanger considering the heat transfer capability is suggested by using the calculation results.

• Wind and Structures
• /
• 제5권2_3_4호
• /
• pp.317-328
• /
• 2002

A numerical investigation on the turbulent flows over a three-dimensional steep hill is presented. The numerical model developed for the present work is based on the finite volume method and the SIMPLE algorithm with a non-staggered grid system. Standard $k-{\varepsilon}$ model and Shih's non-linear model are tested for the validation of the prediction accuracy in the 3D separated flow. Comparisons of the mean velocity and turbulence profiles between the numerical predictions and the measurements show good agreement. The Shih's non-linear model is found to predict mean flow and turbulence better than the Standard $k-{\varepsilon}$. Flow patterns have also been examined to explain the difference in the cavity zone between 2D and 3D hills.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.113-115
• /
• 1998

This paper presents the indirect boundary integral equation method(BIEM) to analyze 3D moving conductor problem. Instead of an artificial upwind algothm, the proposed method uses a fundamental Green's function which is a particular solution of diffusion equation. Therefore, this method yields a stable and accurate solution regardless of the Peclet number. The indirect BIEM is compared with 3D upwind FEM for a numerical model which has analytic solutions.