• Journal of Biosystems Engineering
• /
• 제25권3호
• /
• pp.213-220
• /
• 2000

Grafting of fruit-bearing vegetables has been widely used to increase the resistance to soil-borne diseases, to increase the tolerance to low temperature or to soil salinity, to increase the plant vigor, and to extend the duration of economic harvest time. After grafting, it is important to control the environment around grafted seedlings for the robust joining of a scion and rootstock. Usually the shading materials and plastic films are used to keep the high relative humidity and low light intensity in greenhouse or tunnel. It is quite difficult to optimally control the environment for healing and acclimation of grafted seedlings under natural light. So the farmers or growers rely on their experience for the production of grafted seedling with high quality. If artificial light is used as a lighting source for graft-taking of grafted seedlings, the light intensity and photoperiod can be easily controlled. The purpose of this study was to develop a prototype system for the graft-taking enhancement of grafted seedlings using artificial lighting and to investigate the effect of air current speed on the distribution of air temperature and relative humidity in a graft-taking enhancement system. A prototype graft-taking system was consisted by polyurethane panels, air-conditioning unit, system controller and lighting unit. Three band fluorescent lamps (FL20SEX-D/18, Kumho Electric, Inc.) were used as a lighting source. Anemometer (Climomaster 6521, KANOMAX), T-type thermocouples and humidity sensors (CHS-UPS, TDK) were used to measure the air current speed, air temperature and relative humidity in a graft-taking system. In this system, air flow acted as a driving force for the diffusion of heat and water vapor. Air current speed, air temperature and relative humidity controlled by a programmable logic controller (UP750, Yokogawa Electric Co) and an inverter (MOSCON-G3, SAMSUNG) had an even distribution. Distribution of air temperature and relative humidity in a graft-taking enhancement system was fairly affected by air current speed. Air current speed higher than 0.1m/s was required to obtain the even distribution of environmental factors in this system. At low air current speed of 0.1m/s, the evapotranspiration rate of grafted seedlings would be suppressed and thus graft-taking would be enhanced. This system could be used to investigate the effects of air temperature, relative humidity, air current speed and light intensity on the evaportranspiration rate of grafted seedlings.

• 천문학회보
• /
• 제42권2호
• /
• pp.43.1-43.1
• /
• 2017

A three-dimensional (3D) $Ly{\alpha}$ radiative transfer code is developed to study the Wouthuysen-Field effect, which couples the 21 cm spin temperature of neutral hydrogen and the $Ly{\alpha}$ radiation field, and the escape fraction of $Ly{\alpha}$ from galaxies. The Monte Carlo code is capable of treating arbitrary 3D distributions of $Ly{\alpha}$ source, neutral hydrogen and dust densities, gas temperature, and velocity field. It is demonstrated that the resonance-line profile at the center approaches to the Boltzmann distribution with the gas temperature. A plane-parallel ISM model, which is appropriate for the neutral ISM of our Galaxy, is used to calculate the $Ly{\alpha}$ radiation field strength as a function of height above the galactic plane. We also use a two-phase, clumpy medium model which is composed of the cold and warm neutral media (WNM). It is found that the $Ly{\alpha}$ radiation field is strong enough to thermalize the 21 cm spin temperature in the WNM to the gas kinetic temperature. The escape fraction of $Ly{\alpha}$ is found to be a few percent, which is consistent with the $Ly{\alpha}$ observations of our Galaxy and external galaxies.

• 한국대기환경학회지
• /
• 제16권3호
• /
• pp.237-246
• /
• 2000

An experimental study has been carried out using a rotating water channel in order to investigate the effect of surface roughness on the vertical dispersion of plume within boundary layer. Dispersion measurements of tracers released from two sources with different height at neutral conditions over various rough terrain ranging from rural to urban have been performed. Various values of roughness length were simulated by combining of 4 stream velocities and 3 roughness element conditions. Dispersion measurements have also been made for rough terrain where high buildings are locally concentrated. Values of $\sigma$z increase with roughness and this tendency appears to apply both cases of with and without locally concentrated high buildings. The comparisons of the Bowne's nomogram on $\sigma$2 vs x relationship and the measurements of $\sigma$2 with roughness show good accordance in $\sigma$2 distribution at stability D class over rural, suburban and urban terrain. For constant roughness length the $\sigma$2 values of plumes from lower source height are smaller than those of plumes from higher source at short downwind distance, but this relationship becomes reverse as distance increases. Crossing appears to be made before about 2km. The value of constant I in McMullen's equation $\sigma$2=exp [I+J(In x) + K(In x)2] appears to increase with roughness length, however, the relationships between other constants and roughness have been confirmed. The values of $\sigma$2 for various downwind distances, estimated by using an equation which is employed in ISC (Industrial Source Complex) dispersion model for areas where high buildings are locally assembled, are in accordance with measurements from water channel experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.157-159
• /
• 1996

For the optimal design of the induction heating cooker, precise and accurate analysis of the magnetic field inside the jar must be achieved first. Until now, design methods based on experience has been used in industry field. But this takes a lot of trial and error, high cost and also long development time. So the analysis of the magnetic field distribution is very important. In this paper the magnetic field inside the induction heating cooker is analyzed by using axisymmetrical FEM(finite element method). And the method of the coil location design for the optimal heat source distribution using sensitivity analysis is developed. In addition, the shielding effect of the non-axisymmetrical 3-D ferrite structure used in induction heating cooker is also analyzed by the integral method.

• Animal Systematics, Evolution and Diversity
• /
• 제25권3호
• /
• pp.325-329
• /
• 2009

Lepomis macrochirus from the family Centrarchidae, commonly known as Bluegill sunfish, is an introduced freshwater fish in Korea that thrives in lakes, ponds, reservoirs and rivers. Since its introduction into Korea in 1969, Lepomis macrochirus has rapidly dispersed out and increased in number almost all over the freshwater ecosystems in Korea. Consequently this species causes a severe ecological problem, threatening native fishes due to its omnivorous foraging behaviors upon fish juveniles and many freshwater invertebrates. To address population genetic structure of L. macrochirus, 74 fish samples from 10 populations were collected and compared for their mitochondrial D-loop control region. As the result we found that the genetic diversity of L. macrochirus is extremely low such as resulting only four haplotypes with a few nucleotide differences among them. Analysis of molecular variance (AMOVA) revealed that the source of population genetic variation is largely retained in the comparisons among individuals within populations, while it is relatively low with slight significance at the highest hierarchical group. This distribution pattern differs from what is expected when biogeography is under the influence of natural geographic barriers such as mountain ranges in Korea. Instead the result is accord with the influential role of random spreading events facilitated by local people for aquaculture and fishing, and subsequent dispersals since its single point of introduction into Korea.

• 한국광학회지
• /
• 제14권3호
• /
• pp.306-311
• /
• 2003

본 논문에서는 광전송시스템에서 파장분할다중화 광소자로 사용되는 박막필터형 광소자의 특성 분석 및 평가를 위해 입력광원을 모델링 하였으며 광경로에 대해 광선추적법을 사용하여 전산모의 한 광특성을 실험과 비교, 분석하였다. 그 결과 입력광원에 대한 cell 방식의 모델링이 결합효율의 정확도 및 가우시안 강도분포에 접근성을 볼 때 마이크로 옵틱스형 광소자 분석함에 있어 적합함을 알 수 있다. 박막필터형 광소자에 대한 최적 전산모의 결과 광섬유와 GRIN 렌즈 사이 거리가 0.24mm이며 GRIN 렌즈와 박막필터 사이 거리가 0.25mm일 때 최대 결합효율은 -0.11 ㏈이었으며 동일한 조건에의 실험결과 -0.35 ㏈의 최대 결합효율을 얻었다. 이것은 단심 및 이심페룰, GRIN 렌즈 등과 같은 구성품의 불완전성과 박막필터에 의한 손실을 고려할 때, 전산모의 결과와 매우 일치하는 것으로서 본 연구에서 제안한 입력광원의 모델링을 적용한 전산모의가 박막필터형 광소자의 특성을 예측할 수 있음을 보였다.

• 한국환경농학회지
• /
• 제31권3호
• /
• pp.255-263
• /
• 2012

BACKGROUND: The analysis for the concentration and enantiomeric ratio of OCPs have been performed to confirm the distribution and to emonstrate the pollution characteristics of chiral OCPs in ambient air. METHODS AND RESULTS: In ambient air at coastal and inland sites, concentrations and enantiomer fractions (EFs) of heptachlor (HEPT), eptachlor epoxide (HEPX), trans-chlordane (TC), cis-chlordane (CC), xychlordane (OXY), 2,4'-DDT, 2,4'-DDD with HRGC/HRMS were investigated to understand source and distribution of chiral organochlorine pesticides (OCPs) in ambient air. The mean concentrations of OCPs in ambient air were at the range of 0.027(heptachlor)~1.279 (4,4'-DDT) pg/m3 and 0.0005 (heptachlor)~0.1043 ng/g d.w. (TC), respectively. The mean EFs of OCPs in ambient air were at the range of 0.73 (HEPX)~0.45 (CC). Both preferential depletions of (+) and (-) enantiomer were observed for CC, indicated by EFs either <0.5 or >0.5, while preferential depletions of (-) enantiomer which mean EFs <0.5 were observed for chiral OCPs except TC and MC-5. CONCLUSION: OCPs in ambient air have been distributed from soil, but some of them such as chlordane, DDT etc. might have been introduced by long-range atmospheric transport, considering EFs by chiral analysis and trajectory analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.481-484
• /
• 2001

High voltage induction motors are widely used in industrial factory because have many benefits. But the insulated materials of induction motor are aged by using time, electrical, thermal, circumstantial stresses and so on. Motor failures are occurred by these deterioration phenomena and give rise economic problems to user. In many motor failures, insulated material problems of stator winding happen frequently and occupy high percentages in the failure source. In this paper, the testing specimen(motorette) is manufactured by modeling of stator winding of high voltage induction motor and accelerating test is carried out. Partial discharge signals detected by RF sensor are used to analyze deterioration condition of stator windings. According to aging time, the 3D ( ${\Phi}$-Q-N) distribution and skewness of partial discharge signals are changed.

• Computers and Concrete
• /
• 제34권2호
• /
• pp.231-245
• /
• 2024

A 3D discrete element model integrating the rough surface contact concept with the flat-joint model is suggested to examine the mechanical characteristics of the interfacial transition zone (ITZ) in concrete. The essential components of our DEM procedure include the calculation of the actual contact area in an element contact-pair related to the bonded factor using a Gaussian probability distribution of asperity height, as well as the determination of the contact probability-relative displacement form using the least square method for further computing the force-displacement of ITZs. The present formulations are implemented in MUSEN, an open source development environment for discrete element analysis that is optimized for high performance computation. The model's meso-parameters are calibrated by using uniaxial compression and splitting tensile simulations, as well as laboratory tests of concrete from the literature. The present model's DEM predictions accord well with laboratory experimental tests of pull-out concrete specimens published in the literature.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권3호
• /
• pp.205-210
• /
• 2006

The widespread use and distribution of chloroethylene organic compounds is of serious concern owing to their carcinogenicity and toxicity to humans and wildlife. In an effort to develop active bacterial consortia that could be useful for bioremediation of chloroethylene-contaminated sites in Africa, 16 combinations of 5 dichloroethylene (DCE)-utilizing bacteria, isolated from South Africa and Nigeria, were assessed for their ability to degrade cis- and trans- DCEs as the sole carbon source. Three combinations of these isolates were able to remove up to 72% of the compounds within 7 days. Specific growth rate constants of the bacterial consortia ranged between 0.465 and $0.716\;d^{-1}$ while the degradation rate constants ranged between 0.184 and $0.205\;d^{-1}$ with $86.36{\sim}93.53\;and\;87.47{\sim}97.12%$ of the stoichiometric-expected chloride released during growth of the bacterial consortia in cis- and trans-DCE, respectively. Succession studies of the individual isolates present in the consortium revealed that the biodegradation process was initially dominated by Achromobacter xylosoxidans and subsequently by Acinetobacter sp. and Bacillus sp., respectively. The results of this study suggest that consortia of bacteria are more efficient than monocultures in the aerobic biodegradation of DCEs, degrading the compounds to levels that are up to 60% below the maximum allowable limits in drinking water.