• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.3-11
• /
• 2003

This study has made photographing respectively by changing the photographic distance, converging angle, picturing direction by use of Rollei d7 metric and d7 $metric^{5}$ that is a measurement digital camera. And also in order to minimize the errors happened at the relative orientation, we have sorted out the round target that the relative orientation is automatically on the programming and have calculated RMSE by carrying out the bundle adjustment. We think that such a study could be used as very important basic data necessary in deriving the optimal photographic conditions by the close-range digital photogrammetry and in judging such a degree.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.5
• /
• pp.673-675
• /
• 2004

The tetranuclear copper(II) cluster compound $[Cu_4OCl_6(C_{14}H_{12}N_2)_4]$ has been synthesized by hydrothermal reaction and studied by X-ray diffraction. The four copper(II) atoms locate four capsheaves of a tetrahedral skeletal structure and a oxygen atom as interstitial atom occupies the center position of the same tetrahedron, and each edge of the Cu-Cu tetrahedron is bridged by one ${\mu}_2$-Cl anion. The copper atom possesses slightly distorted trigonal bipyramidal geometry with three ${\mu}_2$-Cl atoms in equatorial position and the interstitial O atom and one N atom from 3-benzyl-benzimidazole ligand occupying axial position. The Cu-Cu distances are in the range of 3.0986-3.1162 ${\AA}$. The EPR spectrum suggested that the copper(II) ground state $d_{x2-y2}$ and the coordination geometry was trigonal bipyramidal.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.1
• /
• pp.97-109
• /
• 2014

This study developed a functional dress shirt for adult males that reflected the body surface variation of a human body section by motion. This study conducted a 3D body scan for 8 subjects in their 40's based on the Size Korea 2010 database. Data recorded the proper posture change value and body surface change value to develop functional dress shirts for adult males. We scanned the subjects with a 3D body scanner for five primarily male wearing dress shirts and operating postures, right standing, arms raised to $90^{\circ}$ horizontal forward position, arms raised $90^{\circ}$ to the horizontal position side, lift up the arm $180^{\circ}$, and arm forward $90^{\circ}$ in a bent posture. We analyzed the 3D scan data from those motions to examine change of length using 3D software Rapidform XOS. The results indicated that the body surface sections with contraction were the front and rear shoulder area, armpit and central length as well the width of arms at more than 10%. The increased body section included the body and armpit back length; in addition, the rear arm vibration girth and under arm girth were more than 10%. In order to reflect the size variation of for each motion, the ease amount of the front and rear shoulder length and width needs to be reduced 20% because it affects the shoulder length during the right standing. The results suggest that the ease amount of the shoulder length should be minimal. The ease amount of the back size needs to be 0.5-2cm bigger and set 0.5-1.5cm longer than the dress shirt length side drooping to compensate for the side length shortage of each motion. The sleeve length needs to be 0-0.5cm shorter, and ease amount of the girth of sleeve bottom needs to be reduced 0-0.7cm due to the size variation of arms. However, the girth of the rear arms is suggested to be 0-0.6cm longer in the ease amount to the rear arm girth as the extension is more than 10% over the width and length of each motion.

• Microbiology and Biotechnology Letters
• /
• v.9 no.4
• /
• pp.179-183
• /
• 1981

An extracellular chitinase was purified from the culture fluid of Streptomyces sp. 115-5, and its inhibition mechanism by end product was studied. The activity of chitinase was suppressed by the reducing sugar as the reaction proceeded, and the activity was inhibited by the addition of D-glucose. Besides D-glucose, the rate of chitin hydrolysis was inhibited by D-glucuronic acid, D-sorbitol and D-xylose in the reaction system of the enzyme. it was found that the hydroxyl groups at the C-2, C-3 and C-4 position of D-glucose molecule play an important role in the inhibition of the chitinase activity. D-glucose was found to inhibit the enzyme activity by mixed type of competitive and non-competitive mode.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.3
• /
• pp.595-602
• /
• 2013

An air circuit breaker (ACB) with novel double-breaker contact and permanent magnet actuator (PMA) is presented. Three-dimensional (3-D) finite element method (FEM) is employed to compute the electro-dynamic repulsion forces, including the Holm force and Lorentz force, which are acting on the static and movable contacts. The electro-dynamic repulsion forces of different contact pieces are computed, illustrating there is an optimal number of contact pieces for the ACB being studied. The electro-dynamic repulsion force of each contact, which varies from the outer position to the inner position, is also computed. Finally, the contacts of the double-breaker are manufactured according to the analyzed results to validate the simulations.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.119-130
• /
• 1998

As a satellite positioning system, GPS is designed to provide the information on three dimensional position, velocity, and time all over the world. The purpose of this paper is to obtain what day has the best accuracy and what time has the best accuracy of measuring of forteen-twenty mimutes for effective using of MAGELLAN G.P.S NAV DLX-10 system. The result of measurement maximum deviation value from November, 1997 to March, 1998 that latitude deviation is 3' .75 and longitude deviation is 2' .1 And the result of measurement maximum deviation value during fourteen minutes of April 29, 1998 that latitude deviation is 3' .75 and longitude deviation is 1' .9. The result of measurement maximum deviation value during twenty minutes of May 6, 1998 that latitude deviation is 4' .75 and longitude deviation is 2' .1 and that is provid 3' .25, 4' .1 to May 13, 1998. So, we expect efficient use of horizontal position for navigation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.505-512
• /
• 2021

A 3D model was developed to calculate the UV intensity of a submerged-type UV disinfection reactor. Numerical experiments were conducted by inputting the design factors of an open channel-type disinfection reactor and a pipe-type disinfection reactor that were installed in an actual sewage treatment plant. The following data were obtained: The average UV intensity of the installed open channel-type reactor and pipe-type reactor was 7.87 mW/cm² and 13.09 mW/cm², respectively; the UV dose reflecting the UV irradiation time and taking into account attenuation effects such as mixing imbalance, lamp aging, temperature, and fouling, was expected to be 21.1 mJ/cm² and 24.8 mJ/cm², respectively, and these values are 5 % and 24 % higher than the target UV dose of 20 mJ/cm², respectively. By using the UV3D model, the optimal lamp position, which maximizes the average UV intensity without changing the size of the disinfection reactor or lamp output power, can be found. In this case, by only adjusting the lamp position, the average UV intensity can be increased by 0.9 % for the open channel-type and 0.5 % for the pipe-type, respectively. A better average UV intensity can be obtained by model simulation. By adjusting the horizontal and vertical ratio of the open channel-type reactor and by moving the lamp position, the average UV intensity can be increased by 7.4 % more than the present case.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• Journal of the Korean Chemical Society
• /
• v.66 no.6
• /
• pp.442-450
• /
• 2022

Diverse pyrrolo[3,2-d]pyrimidines that are expected to exhibit bioactivity were synthesized through O-arylation and Suzuki coupling reactions. Microwave-assisted O-arylation was successfully performed using a Cu metal catalyst, so that 4 position of pyrrolo[3,2-d]pyrimidine could be substituted with phenol group. In addition, 4-aryl substituted pyrrolo[3,2-d]pyrimidines were synthesized with good to excellent yields by microwave-assisted Suzuki coupling reaction using a Pd metal catalyst. By using microwaves as reaction conditions for diversification of derivatives, it was possible to dramatically overcome the disadvantages of traditional heat reactions of long reaction times and heat transfer efficiency problems. The result of this study can be used to be diversify pyrrolo[3,2-d]pyrimidine derivatives, which are expected to play an important role in the drug discovery research.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.7
• /
• pp.63-72
• /
• 2018

The purpose of this study was to compare and analyze the pants pattern of the lower body of 70-85 aged women. I tried to present excellent pants pattern that is convenient and suitable for the activities of elderly women. Through this, I tried to provide basic data necessary for making elderly women 's pants. As a result of evaluating the appearance of the pants pattern according to the body type, the fit of the type 2 was evaluated as the highest in the item except the position of the front waist line. For the objective evaluation of the 3D simulation, the air gap of the pants by the body part analysis showed that there was not much difference in the air gap around the waist circumference, hip circumference, thigh circumference, and knee circumference by applying the same drawing method and body size. However, in type 2, the air gap of thigh and knee circumference parts was larger than that of type 1 and type 3. Because type 2's legs were thin but it used same size of hemline. It was thought that it is necessary to adjust the space of front and back crotch length to 1 inch (2.54 cm) instead of 1.9 cm (3/4 inch) so that the waistline position of all three types can be set up a little to cover the abdomen. This study was conducted to investigate changes in body shape of elderly women and to develop appropriate pants patterns.