• 한국지능시스템학회논문지
• /
• 제13권2호
• /
• pp.137-147
• /
• 2003

새로운 3차원 도립진자 시스템의 구현 및 퍼지제어에 관하여 논한다. 기존의 1차원 또는 2차원 도립진자 시스템과 달리, 3차원 도립진자 시스템은 상하 운동을 포함하는 인간의 도립진자 제어행위를 적절히 모사할 수 있는 새로운 시스템이다. 3차원 도립진자 시스템의 특성 분석과 퍼지제어기 설계를 위하여 3축 직교로봇과 도립진자를 포함하는 기구부의 동력학식을 유도한다. 로봇의 여유자유도와 제한된 작업영역을 고려하면서 도립진자의 요오(yaw) 및 피치(pitch)각을 제어하기 위한 퍼지제어기 설계 방법을 제안한다. 개발된 PC 기반의 다축제어보드를 이용한 실험 결과를 통하여 제안된 시스템의 성능을 검증한다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.157-163
• /
• 2000

In this paper, an Evolving Neural Network Controller(ENNC) which its structure and its connection weights are optimized simultaneously by Real Variable Elitist Genetic Algoithm(RVEGA) was presented for stabilization of an Inverter Pendulum(IP) system with nonlinearity. This proposed ENNC was described by a simple genetic chromosome. And the deletion of neuron, the determinations of input or output neuron, the deleted neuron and the activation functions types are given according to the various flag types. Therefore, the connection weights, its structure and the neuron types in the given ENNC can be optimized by the proposed evolution strategy. Through the simulations, we showed that the finally acquired optimal ENNC was successfully applied to the stabilization control of an IP system.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권8호
• /
• pp.467-472
• /
• 2000

A three-level decoupled sliding mode controller is developed to achieve asymptotic stability for a class of sixth-order nonlinear systems. The sixth-order system is decoupled into three subsystems according to the structure of the whole system. Each subsystem has a separate control target in the form of a sliding surface. The information of the third sliding surface is transferred to the second one through an intermediate variable and the information of the second sliding surface is transferred to the first one through another intermediate variable. Consequently, the controller designed on the basis of the first sliding surface can make three subsystems move toward their sliding surfaces, respectively. The three-level decoupled sliding mode controller is applied to the double-inverted pendulum problem where the zero stable states are required.

• 한국지능시스템학회논문지
• /
• 제16권5호
• /
• pp.601-607
• /
• 2006

본 논문은 칼만필터를 이용한 ZMP의 다음 상태 예측을 통한 새로운 이족로봇의 균형제어기법을 제안한다. 일반적으로 이족로봇의 동역학 모델은 3D-LIPM(3D-Linear Inverted Pendulum Mode)에 의해 수학적으로 근사화되지만, 이는 로봇의 동역학적 특성을 완벽하게 표현할 수 없다. 이족로봇의 안정성은 ZMP(Zero Moment Point) 위치가 안정영역에 존재하는 경우에 안정성이 보장된다. 그리고 로봇 구조와 그 모델 사이의 내재된 오차는 로봇의 안정성에 영향을 끼칠 수 있다. 그러므로 본 논문에서 제안하는 균형제어기법은 내부 오차를 줄일 수 있으며, 적절한 로봇의 제어가 가능하다. 제안된 균형제어기법의 실험은 다양한 상황을 포함한 가상의 공간상에서 모의실험 되었다.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1787-1792
• /
• 2016

Previous walking pattern generation methods could generate walking patterns that allow only straight walking on flat and uneven terrain. They were unable to generate modifiable walking patterns whereby the sagittal and lateral step lengths and walking direction can be changed at every footstep. This paper proposes a novel walking pattern generation method to realize modifiable walking of humanoid robots on unknown uneven terrain. The proposed method employs a walking pattern generator based on the 3-D linear inverted pendulum model (LIPM), which enables a humanoid robot to vary its walking patterns at every footstep. A control strategy for walking on unknown uneven terrain is proposed. Virtual spring-damper (VSD) models are used to compensate for the disturbances that occur between the robot and the terrain when the robot walks on uneven terrain with unknown height. In addition, methods for generating the foot and vertical center of mass (COM) of the 3-D LIPM trajectories are developed to realize stable walking on unknown uneven terrain. The proposed method is implemented on a small-sized humanoid robot platform, DARwIn-OP and its effectiveness is demonstrated experimentally.

• 대한임베디드공학회논문지
• /
• 제3권2호
• /
• pp.82-90
• /
• 2008

In this paper, we introduce a biped walking robot which can do static walking with 22 degree-of-freedoms. The developed biped walking robot is 480mm tall and 2500g, and is constructed by 22 RC servo motors. Before making an active algorithm, we generate the motions of robot with a motion simulator developed using C language. The two dimensional simulator is based on the inverse kinematics and D-H transform. The simulator implements various motions as we input the ankle's trajectory. Also the simulator is developed by applying the principle of inverted pendulum to acquisite the center of gravity. As we use this simulator, we can get the best appropriate angle of ankle or pelvic when the robot lifts up its one side leg during the walking. We implement the walking motions which is based on the data(angle) getting from both of simulators. The robot can be controlled by text shaped command through RF signal of wireless modem which is connected with laptop computer by serial cable.

• 제어로봇시스템학회논문지
• /
• 제20권1호
• /
• pp.87-93
• /
• 2014

Conventional two-wheeled balancing robots are limited in terms of turning speed because they lack the lateral motion to compensate for the centrifugal force needed to stop rollover. In order to improve lateral stability, this paper suggests a two-wheeled balancing mobile platform equipped with a tilting mechanism to generate roll motions. In terms of static force analysis, it is shown that the two-body sliding type tilting method is more suitable for small-size mobile robots than the single-body type. For the mathematical modeling, the tilting-balancing platform is assumed as a 3D inverted pendulum and the four-degrees-of-freedom equation of motion is derived. In the velocity/posture control loop, the desired tilting angle is naturally determined according to the changes of forward velocity and steering yaw rate. The efficiency of the developed tilting type balancing mobile platform is validated through experimental results.

• 한국조명전기설비학회지:조명전기설비
• /
• 제3권4호
• /
• pp.62-69
• /
• 1989

휴대용 전기톱을 비롯한 학습 기계장치, 자동차 연동장치, 각종 화학 분석장치 및 산업용 로봇 시스템등의 전기설비에 광범위하게 응용되고 있는 고유 불안정 도립진자 시스템의 동적 안정화 제어기 설계기법이 소개된다. 복잡한 비선형 동특성을 고려한 수학적 모델링과 C. D. Johnson에 의해 제시된 외란 적응 제어 이론을 적응하여, 최적 레귤레이터형 안정화 제어기를 설계하였으며, 컴퓨터 시뮬레이션 및 실험결과가 만족스럽게 나타났다.

• Journal of Electrical Engineering and Technology
• /
• 제11권3호
• /
• pp.733-740
• /
• 2016

To achieve bipedal walking in real human environments, a bipedal robot should be capable of modifiable walking both on uneven terrain with different heights and on flat terrain. In this paper, a novel walking pattern generator based on a 3-D linear inverted pendulum model (LIPM) is proposed to achieve this objective. By adopting a zero moment point (ZMP) variation scheme in real time, it is possible to change the center-of-mass (COM) position and the velocity of the 3-D LIPM throughout the single support phase. Consequently, the proposed method offers the ability to generate a modifiable pattern for walking on uneven terrain without the necessity for any extra footsteps to adjust the COM motion. In addition, a control strategy for bipedal walking on uneven terrain with unknown height is developed. The torques and ground reaction force are measured through force-sensing resisters (FSRs) on each foot and the foot of the robot is modeled as three virtual spring-damper models for the disturbance compensation. The methods for generating the foot and vertical COM of 3-D LIPM trajectories are proposed to achieve modifiable bipedal walking on uneven terrain without any information regarding the height of the terrain. The effectiveness of the proposed method is confirmed through dynamic simulations.

• Journal of Electrical Engineering and Technology
• /
• 제10권5호
• /
• pp.2142-2148
• /
• 2015

This paper proposes novel real-time footstep planning and following methods for the navigation of humanoid robots. A footstep command is defined by a walking direction and step lengths for footstep planning. The walking direction is determined by a uni-vector field navigation method, and the allowable yawing range caused by hardware limitation is considered. The lateral step length is determined to avoid collisions between the two legs while walking. The sagittal step length is modified by a binary search algorithm when collision occurs between the robot body and obstacles in a narrow space. If the robot body still collides with obstacles despite the modification of the sagittal step length, the lateral step length is shifted at the next footstep. For footstep following, a walking pattern generator based on a 3-D linear inverted pendulum model is utilized, which can generate modifiable walking patterns using the zero-moment point variation scheme. Therefore, it enables a humanoid robot to follow the footstep command planned for each footstep. The effectiveness of the proposed method is verified through simulation and experiment.