• 소성∙가공
• /
• 제22권7호
• /
• pp.383-388
• /
• 2013

Metal flow of the beam blank during H-beam rolling was examined in order to correlate the rolling defects with the beam blank configuration. For this purpose, H-beam rolling was performed on the beam blank where stainless steel bolts were inserted as the marker at the web and flange. The positional variation of the marker was monitored at each rolling pass, and the result was compared with the 3D FEM simulation employing the point tracking function. The simulation results were reasonably agreed with the experimental within the error of 0.5~1mm on both web and flange of the H-beam. It is anticipated that the 3D FEM simulation employing the point tracking function provides the guidance information on analyzing the correlation between the rolling defects and the beam blank configuration in H-beam rolling.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.921-927
• /
• 2001

Steady flow bench test is a practical, powerful and widely used test in most engine manufacturers to give a design concept of a new engine. In order to use steady data as a performance index, it is necessary to build some database, which can correlate the port characteristics with engine data. However, it is very hard to investigate all port and valve shapes with experimental tools. The steady flow scheme is relatively simple and its results are bulk ones such as flow rate and momentum of flow. Therefore a CFD code can be easily applied to the port evaluation. In this study, the steady flow test was simulated through two and three-dimensional analysis on intake port design for comparing with experimental data and confirming the feasibility of applying analytic method. For this purpose, the effect of valve curvature on flow rate was estimated by a CFD code. There results were compared with those of real steady flow tests. As a result, the 2-D analysis described the phenomena qualitatively well, and also the results of 3-D analysis were almost consistent with experimental data.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.482-487
• /
• 2001

Leaf type foil bearings have been used successfully in many aerospace applications such as air cycle machines, turbocompressors and turboexpander. These applications are characterized by light loads, constant speeds and low to moderate temperatures. But, as system on start-up or shutdown, sliding contact between the shaft and foil surfaces cause wear. So, in present study, to understand pressure-flow characteristics and deformation of foil bearing, flow/structure interaction analysis was used. and using this method, 2D and 3D calculation was peformed for shape of foil bearing to know circumferential direction flow and leakage flow characteristics of axial direction.

• 연구논문집
• /
• 통권24호
• /
• pp.107-117
• /
• 1994

In aerodynamic design of centrifugal compressors, impellers are designed through preliminary design and blade profile generation. In order to find out faults of the initially designed impellers, the detailed informations about internal flow phenomena such as pressure distribution, flow separation, blade loading, etc are essential. These informations can be acquired with flow measurements or computational flow analyses. In this study, we calculated 3-D viscous flow in 4 back-swept impellers which were designed in our laboratory, and analyzed the flow characteristics which influence the performance of impellers.

• 한국산학기술학회논문지
• /
• 제13권3호
• /
• pp.1346-1351
• /
• 2012

해상풍력발전기초의 국부세굴을 평가하기 위하여 3차원 수치해석인 FLOW-3D를 이용하여 모노파일과 자켓기초에 대해 해석을 수행하였다. 수치해석 결과에 의하면 모노파일과 자켓기초 레그 주위에서 국부적으로 유속이 증가하는 것으로 나타났으며, 그 후면에서는 후류 및 와류로 인하여 유속의 감소가 나타났다. 자켓기초의 경우에는 모노파일에 비해 단일 레그의 직경이 작고, 자켓레그 사이의 간섭효과 및 자켓구조물의 복잡한 형상으로 인하여 모노파일에 비하여 국부적인 유속 증가가 더 크게 나타났으며 세굴심이 더 깊게 형성되는 것으로 나타났다. 따라서, 해상풍력발전 기초의 세굴 평가 및 세굴방지공 설계시 하부구조물의 형상에 대한 고려가 필요한 것으로 판단된다.

• 한국방재안전학회논문집
• /
• 제16권4호
• /
• pp.9-18
• /
• 2023

기후변화는 외수침수와 연관이 있는 하천제방 안전성에도 영향을 미친다. 제방의 안전성을 높이기 위해 비탈면 보강에 대한 연구가 활발히 수행되어왔다. 특히 최근에는 순환자원을 재활용하여 호안블록을 제작하는 기술 등이 개발되고 있다. 그러나 호안블록의 재료적인 측면의 연구와 더불어 블록 형상에 의해 제외지의 흐름특성에 미치는 영향을 분석하는 것이 필요하다. 따라서 본 연구에서는 호안블록의 형상에 따라 호안면의 유속 등 수리학적 특성의 영향을 3차원 수치모의를 통해 수행하였다. 호안 블록 형상은 3가지 형상을 제안하였고, 이상적인 하천 수로에 블록을 설치하여 수치해석을 수행하였다. 3차원 수치해석은 FLOW-3D를 사용하였고, 호안블록의 형상에 따른 최대유속, 호안부의 바닥유속, 최대 전단응력의 변화를 분석하였다. 그 결과, 자연석형 식생블록인 블록 A가 요철의 크기와 규모가 불규칙하여 호안에 연결하여 설치할 경우 호안 블록 B, C보다 호안 설치구간의 유속변화가 가장 큰 것으로 분석되었다. 향후 하천의 지형적 특성을 고려한다면 현장적용성을 고려한 호안블록 설계를 수행할 수 있을 것으로 기대된다.

• Preventive Nutrition and Food Science
• /
• 제3권1호
• /
• pp.36-42
• /
• 1998

Ion-selective eleltrodes(ISEs) are simple electrodechemical devices for the direct measurement of ions in the samples. A novel potentiometric biosensor for the determination of L-Malate or D-isocitrate has been developed by using CO2-3 -ISE-FIA system was composed of a pump, an injector, a malic enzyme or isocitric dehydrogenase enzyme reactor, a CO2-3 -ISE, a pH/mV meter, and an integrater. The various factors, such as buffer capacity types of plstericizer and polymer, were optimized for the CO2-3 selectivity. In this novel CO2-3 --ISE-FIA system, the potential difference due to the amount of CO2-3 produced from each enzyme reaction was proportional to the amount of L-malate or D-isocitrate.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.563-569
• /
• 2008

In this study, fluid/structure coupled analyses have been conducted f3r 3-D stator and rotor configuration. Advanced computational analysis system based on computational fluid dynamics (CFD) and computational structural dynamics (CSD) has been developed in order to investigate fluid/structure responses of general stator-rotor configurations. To solve the fluid/structure coupled problems, fluid domains are modeled using the structural grid system with dynamic moving and local deforming techniques. Reynolds-averaged Navier-Stokes equations with Spalart-Allmaras (S-A) and SST ${\kappa}-{\omega}$ turbulence models are solved for unsteady flow problems. A fully implicit time marching scheme based on the Newmark direct integration method is used for computing the coupled aeroelastic governing equations of the 3-D turbine blades for fluid-structure interaction (FSI) problems. Detailed fluid/structure analysis responses for stator-rotor interaction flow conditions are presented to show the physical performance and flow characteristics.

• 한국생산제조학회지
• /
• 제26권1호
• /
• pp.6-12
• /
• 2017

In a large 3D printer when the cooler, which cools the filament, acts in one direction, the area directly exposed to the cooling is cooled to the proper temperature. However, the cooling effect on the opposite area is relatively less. It was found in experiments that filaments with a thickness of over 2 mm exhibit the cooling problem in one directional cooling. Consequently, cooling was performed to prevent the flow-down and to produce firm support leading to an improvement in product quality in extrusion. Further, the lay-up of a 3D printer with five guides combined with a duct was achieved. Analysis showed that the improvement in the cooling effect enables stable extrusion and lay-up and thus, reduces fabrication time.

• 한국기계가공학회지
• /
• 제20권8호
• /
• pp.74-79
• /
• 2021

This study focuses on designing a filter case using a water pump for application in eDNA filtering systems. Filter cases, channel type and net type were designed based on the flow field and made using a 3D printer for metal. Flow analysis was conducted for each filter case, and the results were consistent with the pressure experiment results. Furthermore, the water sampling performance test showed that the channel-type filter case exhibited a high flow rate and low pressure through the filter. The eDNA extraction experiment showed that the channel type exhibited improved capture ability compared to the net type.