• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.573-585
• /
• 2008

Flow has attracted more interests in consumer behaviors, with pleasure and fantasy getting more important in shopping. "Flow" means the experience with which consumers feel as pleased and satisfied as in playing pleasantly, and the optimal experience they feel when they are indulged in an activity. The purpose of this study is to investigate the relationships among challenges, skills, flow experience, and future behavioral intention in online shopping malls. In addition, a 3D shopping mall and a 2D shopping mall were selected as the stimuli in order to examine the differences in flow experience in accordance with web site types. A survey questionnaire was developed and 700 data(2D group: n=380, 3D group: n=320) were used for analysis. Data were analyzed through structural equation model to explore effects of challenges and skills on flow. The results of this study are summarized as follows. First, the perception of higher challenges and skills led to positive flow experience and higher time distortion. Second, the higher the level of time distortion was, the higher the flow experience was. This means that a shopping mall will increase flow experience, if it is interesting enough to be unaware of time passing. Third, flow experience had a positive influence on future behavioral intention. Finally, in all variables except skills, the impact of 3D shopping mall is greater than that of 2D shopping mall, which means that web site types affect flow experience.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.168-175
• /
• 2008

In this study, we estimated the discharge capacity of Solicheon sluice gate in Gunjang national industrial complex by hydraulic physical scale model test and FLOW-3D. It was showed that the discharge capacity of gate carried by physical model test and numerical analysis was similar.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3345-3356
• /
• 1994

A general purpose program, TURBO-3D, for the analysis of 3-D fluid flow in complex geometry has been developed, which employs a standard $k-\varepsilon$ turbulence model and a general nonorthogonal grid system. For the purpose of verification of the program and testing the applicability, turbulent flows in an S-shaped diffuser and turbulent flows over an backward facing step are solved and compared with the earlier results. Comparison with the results by the STAR-CD program has been also made for the same flow configuration and grid structure. The agreements are excellent and hence the program has been verified. Since the present program is applicable only on limited flow phenomena and lacks the pre-and post processor, further improvements toward these directions are being made.

• Journal of ILASS-Korea
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

The flow analysis of the axial fan of rotary burner was performed by SIMPLE(Semi Implicit Method for Pressure Linked Equations) algorithm and finite volume mothod performed in the case of 3-D, incompressible, turbulent flow. In this study, the coordinate transformation was adapted for the complex geometry of axial fan, and the standard $k-{\varepsilon}$ model and wall function method were used for analysis of turbulent flow. Multi-block grid system was used for flow field and divided into four domains such as the inlet, outlet, flow field of rotating vane, and tip clearance. Fan rotation was simulated by rotational motion using MRF(Multiple Rotating Reference Frame) in steady, incompressible state flow.

• The KSFM Journal of Fluid Machinery
• /
• v.18 no.1
• /
• pp.44-50
• /
• 2015

Labyrinth seals are commonly used in various kinds of turbomachinery to reduce leakage flow. In the present 3D CFD analysis of see-through-type labyrinth air seal, the methodology of determining leakage and rotordynamic coefficients is suggested with the relative coordinate system for steady-state simulation. The leakage flow and rotordynamic forces predicted by using different solvers and turbulent models of FLUENT are compared with the results of the existing bulk-flow analysis code LABYSEAL.FOR and experiment. The present CFD result of direct stiffness(K) shows only improvement in prediction. The results of leakage and rotordynamic coefficients as well as computing time are sensitive against the used solver and turbulent model.

• Journal of Ocean Engineering and Technology
• /
• v.13 no.3B
• /
• pp.3-13
• /
• 1999

The diffusion characteristics of the high temperature and salinity water discharged in Chinhae Bay under BMP(Barge-Mounted Plants) desalination processes were simulated to access environmental impact. The 3-D baroclinic flow model is formulated by integrating the basic equations with respect to each control volume and by transforming them into a finite difference form using the space-staggered grid system. With a 3-D baroclinic flow model, the tide-induced and density-induced current was computed and confirmed by comparing with observed data. From the results of numerical experiment, it is expected that the maximum diffusion lengths of the high temperature and salinity which increase $0.6^{circ}C$ and 0.2 after discharging are 1 km and 3.5km, respectively. It may be expected that the discharge has an effect on surrounding area of discharge, but not an effect on whole area of Chinhae Bay.

• Journal of computational fluids engineering
• /
• v.4 no.3
• /
• pp.1-11
• /
• 1999

This paper describes the flow field analysis of an automobile with crosswind effects of 15°, 30° 45° and 60° of yaw angles. The governing equations of the 3-D incompressible Navier-Stokes equations are solved by the iterative time marching scheme. The Chimera grid technique has been applied to efficiently simulate the flow around the side-view mirror. The computated surface pressure coefficients have been compared with experimental results and a good agreement has been achieved. The A- and C-pillar vortex and other flow phenomena around the ground vehicle are evidently shown. The variation of aerodynamic coefficients of drag, lift, side force and moments with respect to yaw angle is systematically studied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1750-1754
• /
• 2010

구조물 주변의 국부세굴에 대한 예측은 현장관측 및 수리실험 결과를 이용한 다양한 경험식과 수리모형 실험, 수치 모의 등을 통하여 이루어진다. 본 연구에서는 최근 국내에서 많이 사용되고 있는 3차원 수치모형인 FLOW-3D의 세굴분석 능력 검토를 제고하기 위하여 민감도 분석을 실시하였다. FLOW 3D의 입력 매개변수는 평균입경(Average particle diameter), 유사 비중(Density of the sediment particle), 한계 무차원 소류력(Critical Shields number), 세굴 조절개수(Scour erosion adjustment), 한계 유사비(Critical sediment fraction), 점착성 유사비(Cohesive sediment fraction), 유사 항력(sediment drag force), 안식각(Angle of repose)이 있다. 이 중에서 평균입경, 안식각, 세굴조절개수, 한계 유사 fraction 등의 매개변수에 대해 초기값을 중심으로 일정 비율로 구분하여 민감도 분석을 실시하였다. 주요 매개변수의 민감도 분석 결과는 수리실험 결과치와 비교 검토 후에 민감도의 변화 범위와 선행하여 조정할 수 있는 매개변수를 제시할 수 있다. 이러한 결과를 바탕으로 수공구조물 주변의 국부 세굴에 관한 해석시 FLOW-3D를 이용한 분석에서 보다 신뢰도 높은 결과 산출이 가능할 것으로 판단된다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.580-589
• /
• 2019

Indonesia has a very short supply of electricity. As a solution to this problem, plans for construction of thermal power plants are increasing. Thermal power plant require the cooling water system to cool the overheated engine and equipment that accompany power generation, and the circulation water pump chamber among the cooling water system are generally designed according to the ANSI (1998) standard. In this study, the design criterion $20^{\circ}$ for the spreading angle of the ANSI (1998) of the layout of the circulating water pump chamber can not be satisfied on the K-coal thermal power plant site condition in Indonesia. Therefore, 3-D numerical model experiment was carried out to obtain a hydraulically stable flow and stable structure. The Flow-3D model was used as numerical model. In order to examine the applicability of the Flow-3D model, the flow study results around the rectangular structure of Rodi (1997) and the numerical analysis results were compared around the rectangular structures. The longitudinal velocity distribution derived from numerical analysis show good agreement. In order to satisfy the design velocity in the circulating water pump chamber, a rectangular baffle favoring velocity reduction was applied. When the approach velocity into the circulating water pump chamber was occurred 1.5 m/s ~ 2.5 m/s, the angle of the separation flow on the baffle was occurred about $15^{\circ}{\sim}20^{\circ}$. By placing the baffle below the separation flow angle downstream, the design velocity of less than 0.5 m/s was satisfied at inlet bay.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1675-1678
• /
• 2008

어류는 민감하기 때문에 최적화된 어도를 설계하는 것은 매우 어려운 일이다. 이와 같은 문제를 해결하기 위해서, 관찰, 수리모형시험과 같은 방법을 이용한 연구가 주를 이루어 왔다. 최근 들어 어도에 대한 기본 지식의 축적과 CFD 프로그램이 발전함에 따라 수치모의를 이용해 최적 어도를 설계하고자 하는 노력이 활발해 지고 있다. 본 연구에서는 최적 어도 설계를 도모하기 위해서 어류의 휴식을 위해 설치되는 풀(pool) 내의 흐름해석을 수행하였다. 군남홍수조절지를 대상으로 설계도면을 분석하여 3차원으로 변환하여 구조물형상을 구축하였으며, FLOW-3D 모형을 이용하여 흐름을 해석하였다. 휴식 풀 내의 흐름을 모의한 결과 어도 내 월류 수심이 10cm 일 경우, 휴식 풀 내 유속은 풀 내 유입어도의 노치와 잠공부분에서 최대 유속이 0.4m/s로 나타났고, 국부적으로 집중된 유속에 의해 풀 내 순환류가 발생하나, 유속의 범위가 최대 0.15m/s를 넘지 않는 것으로 모의되었다.