• 한국추진공학회지
• /
• 제8권2호
• /
• pp.102-114
• /
• 2004

리치컷형 폭발볼트 모델에서, 3차원 솔리드 모델링을 통한 형상모델의 작성, 요소분할 방법, 경계조건의 부과 및 해석방법. 계산결과의 처리 등 폭발볼트의 수치해석에 필요한 모든 과정을 정립하고, 해석결과와 이미 수행된 시험결과의 비교를 통하여 볼트의 파손해석에 사용될 수 있는 파손모델과 파손응력을 선정하였다. 해석에는 볼트의 파손응력을 결정할 때 사용한 모델과, 시험결과와 해석결과로부터 설정된 파손모델의 타당성 평가를 위한 추가 모델들을 사용하였으며, 정립된 해석 프로시져의 적용으로 기존에 의존하였던 성능시험 평가 횟수를 대폭 줄일 수 있을 것으로 생각되며. 이에 따른 개발기간의 단축도 함에 고려할 수 있다. 특히, 기존의 폭발볼트 설계할 때 어려운 점으로 여겨졌던 폭발볼트의 최종 성능에 미치는 여러 가지 인자의 영향을 쉽게 평가할 수 있어, 이러한 설계능력향상, 시제품 제작 횟수의 감소, 개발기간의 단축 등은 최종적으로 시제개발 원가절감의 효과를 갖다 줄 것으로 판단된다.

• Advances in Computational Design
• /
• 제3권3호
• /
• pp.269-288
• /
• 2018

180 different 2D numerical analyses have been carried out to estimate the factor of safety (FOS) for rooted slopes. Four different types of vegetated coverage and a variety of slope geometry considering three types of soil have been evaluated in this study. The highly influenced parameters on the slope's FOS are determined. They have been chosen as the input parameters for developing a new practical relationship to estimate the FOS with an emphasis on the roots effects. The dependency of sliding mode and shape considering the soil and roots-type has been evaluated by using the numerical finite element model. It is observed that the inclination and height of the slope and the coverage type are the most important effective factors in FOS. While the soil strength parameters and its physical properties would be considered as the second major group that affects the FOS. Achieved results from the developed relationship have shown the acceptable estimation for the roots slope. The extracted R square from the proposed relationship considering nonlinear estimation has been achieved up to 0.85. As a further cross check, the achieved R square from a multi-layer neural network has also been observed to be around 0.92. The numerical verification considering different scenarios has been done in the current evaluation.

• 한국광학회지
• /
• 제11권5호
• /
• pp.360-364
• /
• 2000

반도체 포화 흡수거울 (Semiconductor Saturable Absorber Mirror:SESAM)을 이용하여 Cr:LiSAF 레이저를 제작하고 이를 모드록킹 시켰다. 펌핑 레이저는 파장이 667 nm이고, 출력이 500mW인 두 대의 고출력 레이저(Coherent S-67-500C-100-H)가 사용되었으며, 레이저 결정은 Brewster-Brewster 모양인 $Cr^{+3}$의 농도가 1.5%이고 길이가 6mm인 것을 사용하였다. 공진기는 X-형 구조로, 곡률반경이 10cmdls 오목거울과, 군속도 보상을 위한 SF10 프리즘, 투과율이 1%의 출력거울을 사용하였다. 포화흡수체로 사용되는 SESAM의 구조는 맨위층에 10nm의 $AlAs/Al_{0.15}Ga_{0.85}As$ 양자우물과 30쌍의 $AlAs/Al_{0.15}Ga_{0.85}As/GaAs/Al_{0.15}Ga_{0.85}As$반사경으로 구성되어 있다. 펌핑 레이저의 출력이 800mWdlfEo 레이저 출력은 3mW였고, 중심파장은 833nm이었으며 스펙트럼 대역폭은 4nm, 레이저 펄스폭은 220fs 였다.

• 한국지진공학회논문집
• /
• 제19권3호
• /
• pp.85-92
• /
• 2015

Response spectra of a building are made with a SDOF system taking into account a first mode shape, even though higher modes may affect on the dynamic responses of a high-rise building. A soft soil layer under a building also affects on the responses of a building. In this study, seismic responses of a MDOF system were investigated to examine the effects of higher modes on the response of a tall building by comparing them with those of a SDOF system including the kinematic interaction effect. Study was performed using a pseudo 3D finite element program with seven bedrock earthquake records downloaded from the PEER database. Effects of higher modes on the seismic responses of a tall building were investigated for base shear force and base moment of a MDOF system including story shear forces and story moments. Study results show that higher modes of a MDOF system contribute to a reduction of base shear force up to 1/4-1/5 of KBC and base moment. The effect of higher modes is more significant on the base shear force than on the base moment. Maximum story shear force and moment occurred at the top part of a building rather than at a base in the cases of tall buildings differently from short buildings, and higher modes of a tall building affected on the base forces making them almost constant at the base. A soft soil layer also affects some on the base shear force of a high-rise building independently on the soft soil type, but a soft soil effect is prominent on the base moment.

• Smart Structures and Systems
• /
• 제4권2호
• /
• pp.221-232
• /
• 2008

This paper represents the final results of a research program sponsored by the European Commission through project WIND-CHIME ($\underline{W}$ide Range Non-$\underline{IN}$trusive $\underline{D}$evices toward $\underline{C}$onservation of $\underline{HI}$storical Monuments in the $\underline{ME}$diterranean Area), in which the possibility of using advanced seismic protection technologies to preserve historical monuments in the Mediterranean area is investigated. In the current research, the dynamic characteristics of two outstanding Mamluk-Style minarets, which similar minarets were reported to experience extensive damage during Dahshur 1992 earthquake, are investigated. The first minaret is the Qusun minaret (1337 A.D, 736 Hijri Date (H.D)) located in El-Suyuti cemetery on the southern side of the Salah El-Din citadel. The minaret is currently separated from the surrounding building and is directly resting on the ground (no vaults underneath). The total height of the minaret is 40.28 meters with a base rectangular shaft of about 5.42 ${\times}$ 5.20 m. The second minaret is the southern minaret of Al-Sultaniya (1340 A.D, 739 H.D). It is located about 30.0 meters from Qusun minaret, and it is now standing alone but it seems that it used to be attached to a huge unidentified structure. The style of the minaret and its size attribute it to the first half of the fourteenth century. The minaret total height is 36.69 meters and has a 4.48 ${\times}$ 4.48 m rectangular base. Field investigations were conducted to obtain: (a) geometrical description of the minarets, (b) material properties of the minarets' stones, and (c) soil conditions at the minarets' location. Ambient vibration tests were performed to determine the modal parameters of the minarets such as natural frequencies and mode shapes. A $1/16^{th}$ scale model of Qusun minaret was constructed at Cairo University Concrete Research Laboratory and tested under free vibration with and without SMA wire dampers. The contribution of SMA wire dampers to the structural damping coefficient was evaluated under different vertical loads and vibration amplitudes. Experimental results were used along with the field investigation data to develop a realistic 3-D finite element model that can be used for seismic risk evaluation of the minarets. Examining the updated finite element models under different seismic excitations indicated the vulnerability of such structures to earthquakes with medium to high a/v ratio. The use of SMA wire dampers was found feasible for reducing the seismic risk for this type of structures.

• 대한인간공학회지
• /
• 제36권1호
• /
• pp.9-21
• /
• 2017

Objective: The objective of this study is to understand the effect of angle and curvature of push-return switches, which are external factors in the operation environment inside the cars, on the feel of operation and to propose optimum alternatives. Background: Customers' needs for products are changing from functional and performance aspects to customer-led type where customers can reflect on their needs on the products. The operation inside cars is executed by HMI. The push-return switch is utilized as the most intuitive mode of HMI; therefore, this push-return switch, which is widely used, has to be developed by assessing the preference and satisfaction of the customer. Method: The angle and curvatures, which are external factors that affect the feel of operation, are drawn through surveying the preceding research literatures. The stages to construct alternatives in experiments are as follows: (1) the tactile switch is replaced after dismantling the switch assembly to evaluate the internal characteristics proposed by preceding researches, (2) a drawing is prepared by using a design software, is printed using 3D printer, and then it is attached on the switch assembly, and (3) evaluation for satisfaction of operation is carried out by using a driving simulator. Results: Both the angle and curvature that are external factors of switch significantly affect the feel of operation. However, interaction between the two factors is found insignificant. Therefore, an optimum alternative is proposed considering the experimental outcomes. Conclusion: This study evaluates the satisfaction in operation that affects the feel of operation environment inside the cars. Based on the study results, a guideline for switch design in the center fascia is proposed. Application: This study is expected to be used as basic data for designing automotive switches, as well as switches in the industries similar with the operation environments of cars.

• 한국광학회지
• /
• 제10권6호
• /
• pp.500-506
• /
• 1999

레이저 다이오드와 수신광검출기가 집적된 소자를 V-홈을 가진 실리콘 광학벤치에 flip-chip 본딩하고, 경사면을 가진 하나의 단일모드 광섬유와 수동정렬하는 방법을 사용하여 가입자망을 위한 저가의 양방향 송수신 모듈을 설계, 제작하였다. 광섬유의 단면 경사각에 따른 송신광결합 효율과 수신광결합 효율사이의 병목점을 찾기 위해 Gaussian빔 모델을 사용하여 수평정렬거리, 광섬유 단면 경사각, 수직정렬오차등의 변수에 따른 광결합계수를 계산함으로써, 최적의 광정렬조건을 예측하였다. 또한 실리콘 광학벤치에서 광결합효율을 측정하여 광섬유의 수직정렬오차에 따른 광결합계수의 감소가 광섬유의 경사각에 의해 보상될 수 있다는 계산결과의 타당함을 확인하였다. 실제의 sub-module 제작 및 광결합 실험에서 송신빔이 광섬유 단면에 반사되어 PD로 입사되는 것을 최소화하기 위하여 광섬유 단면을 경사절두원추형으로 제작함으로써 PD의 수신 잡음을 $30mu$m 이상의 정렬거리에서 -35dB이하로 유지할 수 있었다. 같은 조건에서 단면 경사각이 $12^{\circ}$인 광섬유에 의해 -12.1dB의 송신출력과 0.2A/W의 responsivity를 얻을 수 있었다.

• 한국전자파학회논문지
• /
• 제13권7호
• /
• pp.667-678
• /
• 2002

본 논문에서는 구형 빔 패턴 형성을 위한 다층 이차원 원형 도체 배열을 갖는 새로운 방사 구조를 제안하였다. 새로운 방사 구조는 방사 원형 도파관 위에 유한하게 적층된 원형 도체 배열 소자들이 무한적, 주기적 평면 배열 구조를 갖는다. 이론적 해석은 rigid full-wave 해석 방법으로 배열 구조의 각 영역에서의 전자장에 대한 모드 전개식과 원형 도체상의 전류에 대한 모드 전개식에 바탕을 두고 상세히 수행되었으며, 함수의 직교성, 모드 정합 방법, 경계조건 그리고 Galerkin 방법을 사용하여 선형 대수 방정식 시스템을 유도하였다. 또한, Gauss 소거법을 사용하여 배열 특성 계산에 필요한 미지의 진폭 계수들을 얻었다. 제안된 알고리듬은 Ka대역에서 $\pm$20$^{\circ}$의 빔 폭을 갖는 구형 빔 패턴 형성을 위한 배열 설계에 사용되었으며, 일반적인 응용을 위해 파장으로 정규화된 최적화 설계 변수들을 제시하였다. 시뮬레이션 결과와 실험 결과들을 서로 비교하기 위해, 대칭적으로 19개의 방사 소자를 갖는 Ka 대역 실험 시제품을 제작하였다. 방사 원형 도파관 개구면 위에 적층된 원형 도체 배열 구조는 얇은 필름상에 이온-빔 증착 방법을 사용하여 구현되었다. 계산된 단위소자 패턴들과 시제품의 측정된 단위소자 패턴들은 빔 스캔 범위 내에서 거의 일치함을 보여주었으며, 사이드 로브 레벨과 그레이팅 로브 레벨에 대한 결과 분석도 이루어졌다 또한, 정 방향에서 다층 원형 도체 구조에 의해 생길 수 있는 blindness 현상에 대하여 언급하였다. 제작된 시제품의 입력 VSWR은 1.14 보다 작았으며, 29.0 GHz, 29.5 GHz 그리고 30 GHz에서 측정된 이득은 각각 10.2 dB, 10.0 dB 그리고 10.7 dB 였다. 실험 및 시뮬레이션 결과들은 제안된 다층 원형 도체 배열 구조가 효율적인 구형 빔 패턴을 형성할 수 있음을 보여 주었다.능성을 시도하였고, 그 결과는 다음과 같다. 1. Cholesterol을 제거한 cheese의 제조에서 최적조건은 균질압력 1200psi(70kg$cm^2$), 균질온도 $70^{\circ}$, $\beta$-cyclodextrin 첨가량 2%였으며, 이때 우유의 cholesterol의 제거율이 86.05%로 가장 높게 나타났다. 2. Cholesterol을 제거한 cheese들의 수율은 모두 12.53%(control 10.54%) 이상으로 균질 처리가 cheese의 수율을 18.88%이상 향상시키는 것으로 나타났다. 3. 유지방 함량 23.80%인 control 치즈의 cholesterol 함량은 81.47mg/100g이었고, 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 2%를 첨가한 cheese에서는 cholesterol 함량이 20.15mg/100g으로 cholesterol 제거율이 75.27%로 가장 높게 나타났다. 4. Meltability는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서 2.25cm(control 3.34cm)로 가장 낮았으며, 균질압력이 증가할수록 meltability가 감소하여 치즈의 품질을 저하시켰다. 5. Control 치즈의 stretchability는 30cm 이상 늘어나 가장 양호한 수치인 5점을 나타낸 반면, cholesterol을 제거한 cheese에서는 5~10cm 사이를 나타내어 2점으로 stretchability가 저하된 것을 볼 수 있었다. 6. Oiling off는 균질압력 1200psi(91kg/$cm^2$)에 $\beta$-cyclodextrin 1과 2%로 처리한 치즈에서

• Wind and Structures
• /
• 제30권6호
• /
• pp.663-678
• /
• 2020

Robust semi-active vibration control of wind turbines using tuned mass dampers (TMDs) is a promising technique. This study investigates a 1.5 megawatt wind turbine controlled by eight different types of tuned mass damper systems of equal mass: a passive TMD, a semi-active varying-spring TMD, a semi-active varying-damper TMD, a semi-active varying-damper-and-spring TMD, as well as these four damper systems paired with an additional smaller passive TMD near the mid-point of the tower. The mechanism and controllers for each of these TMD systems are explained, such as employing magnetorheological dampers for the varying-damper TMD cases. The turbine is modelled as a lumped-mass 3D finite element model. The uncontrolled and controlled turbines are subjected to loading and operational cases including service wind loads on operational turbines, seismic loading with service wind on operational turbines, and high-intensity storm wind loads on parked turbines. The displacement and acceleration responses of the tower at the first and second mode shape maxima were used as the performance indicators. Ultimately, it was found that while all the semi-active TMD systems outperformed the passive systems, it was the semi-active varying-damper-and-spring system that was found to be the most effective overall - capable of controlling vibrations about as effectively with only half the mass as a passive TMD. It was also shown that by reducing the mass of the TMD and adding a second smaller TMD below, the vibrations near the mid-point could be greatly reduced at the cost of slightly increased vibrations at the tower top.

• 천문학회보
• /
• 제41권2호
• /
• pp.49.2-49.2
• /
• 2016

The number of discovery of asteroids with peculiar rotational states has recently increased, and hence a novel approach for lightcurve analysis is considered to be critical. In order to investigate objects such as Non-Principal Axis (NPA) rotator, we selected a NPA candidate, (5247) Kryolv as our target considering its Principal Axis Rotation (PAR) code and the visibility in early 2016. The observations of Krylov were made using Korea Microlensing Telescope Network (KMTNet) 1.6 m telescopes installed at the three southern sites with TO (Target of Opportunity) observation mode. We conducted R-band time-series photometry over a total of 51 nights from January to April 2016 with several exposures during each allocated run. The ensemble normalization photometry was employed using the AAVSO Photomtric All-Sky Survey (APASS) catalog for the standardization. We successfully confirmed its NPA spin state based on the deviation from the reduced lightcurve, and thus Krylov is recorded as the first NPA rotator of its kind in the main-belt, with its precession and rotation periods, $P{\varphi}=81.18h$ and $P_{\Psi}=67.17h$, respectively. In this paper, we present the spin direction, the 3D shape model and taxonomy of the newly confirmed NPA asteroid (5247) Krylov.