• 한국지진공학회논문집
• /
• 제14권6호
• /
• pp.23-31
• /
• 2010

우리나라 공동주택의 대부분을 이루는 철근콘크리트(RC) 벽식 구조의 지진에 대한 거동을 예측하기 위해 신뢰성이 있으며 사용하기 간편한 해석모델의 수립이 필요하다. 본 논문은 기 수행된 RC 전단벽 부분구조의 횡 하중 반전주기 실험결과를 기준으로 하여 PERFORM 3D에서 가용한 RC벽 요소 및 보 기둥 요소 해석모델을 응용하여 최대한 실험결과와 근접한 결과를 주는 모델을 수립하였다. 전체 및 국부거동에 있어서 이 해석결과를 실험결과와 비교함으로써 해석의 신뢰성과 한계성을 확인함과 동시에, 실험에서 파악하기 어려운 내부 저항력의 구성, 전체 구조물의 저항 메카니즘에 대한 정량적인 분석을 제시한다.

• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2010

Gravure printing and manufacturing of advanced electronic components in a way that is going extra hold position. It is to print the electronic components of the rapid productivity improvements as well as cost-saving and environment-friendly industries such as the transition is a big advantage. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented using gravure printability. The condition of variables of IGT is pressure and velocity. By using Flow-3D simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.272-276
• /
• 2014

In this paper, cable drive mechanism is proposed to implement high reduction gear ratio. Cable drive mechanism has great advantages such as light weight, high degree of freedom about design aspect and zero backlashes. However, it is restrictively utilized for robotic applications because it is difficult to implement high reduction gear ratio more than 10 to 1. Proposed mechanism enables multi-level reductions by adopting seamless winding method (SWM) which links the previous output axis and the next input axis. Consequently, this reduces the mechanical complexity significantly and enables high reduction with only one single wire cable. 3D CAD design was provided and prototype was manufactured.

• 대한기계학회논문집A
• /
• 제32권2호
• /
• pp.202-208
• /
• 2008

A 6 DOF Multi axis simulation table (MAST) is used to perform vibration and fatigue tests for parts or assemblies of automobiles, aircraft, or other systems. It consists of a table and 6 linear actuators. For its attitude control, we have to adjust the lengths of 6 actuators properly. The system is essentially a parallel mechanism. Three actuators are connected to the table directly and other three actuators are connected indirectly. Because of these, the MAST shows also a serial mechanism#s property: the inverse kinematics is more complicated than a pure parallel mechanism and each actuator can operate independently. The authors have performed a kinematics analysis of the 6 DOF MAST. We have presented an analytical and a numerical solution for the inverse and forward kinematics, and we have verified the solutions by a 3D CAD software.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.285-286
• /
• 2006

Magnesium is the lightest of all the structural metals having density of 1.74. It is approximately 2/3 lighter than aluminium, l/4 lighter than titanium alloy and 1/5 lighter than iron. Among the light-weight alloys, magnesium and its alloys show a good possibility for high performance aerospace and automotive applications, however the widespread use of magnesium alloys has been limited mainly by its poor oxidation and corrosion resistance. In this work, corrosion-resistive thin films were prepared onto the magnesium alloy substrate(AZ91D) by environmental friendly coating technique, ion plating method. And their corrosion protection mechanism were analyzed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.190.2-190.2
• /
• 2005

• 드라이브 ㆍ 컨트롤
• /
• 제1권3호
• /
• pp.47-56
• /
• 2004

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.153-165
• /
• 2013

기존의 보행분석 연구들은 하지를 하나의 스프링으로 간주하였다. 만약 슬관절 신전을 보조할 수 있는 슬관절 액추에이팅 메커니즘을 개발할 수 있다면 보행에 필요한 탄성-변형률에너지를 혁신적으로 저장-방출할 수 있고, 그 결과 보행 중 하지강성은 더욱 증가할 것이다. 게다가 족관절 액추에이팅 메커니즘까지 추가되어 있다면 슬관절 액추에이터에 의한 과도한 인공하지강성을 능동적이고 적절한 수준으로 보상해주는 기전으로 작동할 것이다. 만약 가속도에 의한 보행속도 증가를 방지하기 위해 인위적 감속통제를 작동시킨다면 불필요한 운동에너지의 방출이 발생되고 하지강성 액추에이터의 실효성은 의심을 받게 된다. 따라서 본 저자는 보행속도를 2개의 세그먼트에 의한 상대 각속도 조절기법을 이용하여 하지강성을 증가시킨다는 기본개념으로 슬-족관절 액추에이터 시스템을 개발하였다. 또한 족관절에 슬관절 액추에이팅에 대한 보상기전이 존재하는 경우, 족관절의 보상기전이 중족지절관절 경사각 및 보행속도 변화에 미치는 상호영향을 연구하였다.

• Reproductive and Developmental Biology
• /
• 제36권4호
• /
• pp.275-281
• /
• 2012

Embryonic stem cell-preconditioned microenvironment is important for cancer cells properitities by change cell morphology and proliferation. This microenvironment induces cancer cell reprogramming and results in a change in cancer cell properties such as differentiation and migration. The cancer microenvironment affects cancer cell proliferation and growth. However, the mechanism has not been clarified yet. Using the ES-preconditioned 3-D microenvironment model, we provide evidence showing that the ES microenvironment inhibits proliferation and reduces oncogenic gene expression. But ES microenvironment has no effect on telomerase activity, cell viability, cellular senescence, and methylation on Oct4 promoter region. Furthermore, methylation of Nanog was increase on ES-preconditioned microenvironment and supports results that no difference on RNA expression levels. Taken together, these results demonstrated that in the ES-preconditioned 3-D microenvironment is a crucial role for cancer cell proliferation not senescence.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.454-457
• /
• 2008

The purpose of this study is to establish 3D equipment database for BIM because of efficient using a BIM tool. In this study (or paper), we analysis the mechanism of using equipment database. And then, a based on this results we apply and conduct the results. Therefore we expect to make better using method of BIM and efficient planning method of equipment.