• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 추계학술발표대회 논문집
• /
• pp.167-170
• /
• 2004

In order to investigate the impact behaviors of 3-D braided glass/epoxy composites, the energy profiles and damage area were compared to the laminates of similar volume fraction and composition. The energy profiles showed different characteristics from each other which indicates they have distict energy absorption mechanisms. The image analysis on the damage projections visualized the crack propagation paths along the fiber direction.

• Journal of Welding and Joining
• /
• 제18권2호
• /
• pp.86-94
• /
• 2000

This study was performed to investigate types and formation mechanism of cracks in two Al alloy welds, A5083 and A7N01 spot-welded by pulse Nd : YAG laser, using SEM, EPMA and Micro-XRD. In the weld zone, three types of crack were observed : center line crack({TEX}$C_{C}${/TEX}), diagonal crack({TEX}$C_{D}${/TEX}), and U shape crack({TEX}$C_{U}${/TEX}). Also, HAZ crack({TEX}$C_{H}${/TEX}) was observed in the HAZ region, furthermore, mixing crack({TEX}$C_{M}${/TEX}) consisting of diagonal crack and HAZ crack was observed. White film was formed at th hot crack region in the fractured surface after it was immersed to 10% NaOH water. In the case of A5083 alloy, white films in {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack region were composed of low melting phases, {TEX}$Fe_{2}SiAl_{8}${/TEX} and eutectic phases, $Mg_2$Al$_3$ and $Mg_2$Si. Such films observed $CuAl_2$, {TEX}$Mg_{32}(Al,Zn)_{3}${/TEX}, MgZn$_2$, $Al_2$CuMg and $Mg_2$Si were observed in the whitely etched films near {TEX}$C_{C}${/TEX} crack and {TEX}$C_{D}${/TEX} crack regions. The formation of liquid films was due to the segregation of Mg, Si, Fe in the case of A5083 alloy and Zn, Mg, Cu, Sim in the case of A7N01 alloy, respectively. The {TEX}$C_{C}${/TEX} and {TEX}$C_{D}${/TEX} cracks were regarded as a result of the occurrence of tensile strain during the welding process. The formation of {TEX}$C_{M}${/TEX} crack is likely to be due to the presence of liquid film at the grain boundary near the fusion line in the base metal as well as in the weld fusion zone during solidification. The {TEX}$C_{U}${/TEX} crack is considered a result of the collapsed keyhole through incomplete closure during rapid solidification.

• Bulletin of the Korean Chemical Society
• /
• 제24권3호
• /
• pp.350-356
• /
• 2003

The mechanism of the decomposition of a bronchodilator, S-nitroso-N-acetyl-D,L-penicillamine (SNAP) by a bronchoconstrictor, aqueous sulfite, has been investigated in detail. The decomposition was studied using a conventional spectrophotometer at 336 nm over the ranges: 0.010 ≤ $[S^{IV}]_T$ ≤ 0.045 mol $dm^{-3}$, 3.96 ≤ pH ≤ 6.80 and 15.0 ≤ θ≤ 30.0 ℃, 0.60 ≤ I ≤ 1.00 mol $dm^{-3}$, and at ionic strength 1.00 mol $dm^{-3}$ (NaCl). The rate of reaction is dependent on the total sulfite concentration and pH in a complex manner, i.e., $k_{obs}\;=\;k_1K_2[S^{IV}]_T/ ([H^+]\;+\;K_2)$. At 25.0 ℃, the second order rate constant, $k_1$, was determined as $12.5\;{\pm}\;0.15\;mol^{-1}\;dm^3\;s^{-1}$. ${\Delta}H^{neq}\;=\;+32\;{\pm}\;3 kJ\;mol^{-1}\;and\;{\Delta}S^{\neq}\;=\;-138\;{\pm}\;13\;J\;mol^{-1}K^{-1}$. The N-nitrosohydroxylamine-N-sulfonate ion was detected as an intermediate before the formation of any of the by-products, namely, N-acetyl-D,L-penicillamine. The effect of concentration of aqueous copper(Ⅱ) ions on this reaction was also examined at pH 4.75, but there was no dependence on $[Cu^{2+}]$. In addition, the $pK_a$ of SNAP was determined as 3.51 ± 0.06 at 25.4 ℃ [I = 1.0 mol $dm^{-3}$ (NaCl)].

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.179-182
• /
• 1996

Hydrodediazoniation product (3a-d) was found to be the major product in the reaction of arenediazonium tetrafluoroborate (1a-d) with triethylamine (2) in methanol under nitrogen at room temperature. A quantitative study on the title reaction was investigated in detail and two remarks were noteworthy. One was the linear increase in the yield of 3a-d by increasing the molar concentration of 2 until equimolar concentration was reached between 1a-d and 2. The other was the suppression of the formation of 3a-d in the presence of oxygen. Based on these results, the title reaction was better understood by 1:1 electron transfer reaction between reactants (1a-d and 2) rather than by radical chain mechanism proposed in the reaction of arenediazonium tetrafluoroborate and triphenylphosphine.

• 인터넷정보학회논문지
• /
• 제17권6호
• /
• pp.41-51
• /
• 2016

3D-Touch 인터페이스의 등장은 사용자로 하여금 새로운 인터랙션을 제공할 수 있는 기반을 마련해 주었다. 하지만 일부 스마트폰에서만 3D-Touch가 제공되고 있고, 대부분 2D-Touch 스마트폰에서 사용되는 인터랙션 방법은 새로운 방식의 3D-Touch의 인터랙션을 제대로 적용할 수 있는 방안은 마련되지 않고 있다. 이는 3D-Touch와 2D-Touch 인터랙션에서의 차이가 발생하는 주요 원인이다. 이에 따라 본 연구에서는, 2D-Touch 기반 디바이스에서도 3D-Touch의 소프트웨어적 기능과 인터페이스를 활용할 수 있게 해주는 가상 포스 터치 (Virtual Force Touch) 방식을 이용해서 3D-Touch 인터페이스를 활용할 수 있는 방안에 대하여 제안한다. 제안한 방안은 2D-Touch를 제공하는 스마트폰에서 사용자가 포스터치 입력을 발생하였을 때 스마트폰에 차지하는 손가락 면적을 분석하여 적절한 가상 포스 터치 구현하기 위한 것이다.

• BMB Reports
• /
• 제45권3호
• /
• pp.189-193
• /
• 2012

Cyst formation is a major characteristic of ADPKD and is caused by the abnormal proliferation of epithelial cells. Renal cyst formation disrupts renal function and induces diverse complications. The mechanism of cyst formation is unclear. mIMCD-3 cells were established to develop simple epithelial cell cysts in 3-D culture. We confirmed previously that Mxi1 plays a role in cyst formation in Mxi1-deficient mice. Cysts in Mxi1 transfectanted cells were showed by collagen or mebiol gels in 3-D cell culture system. Causative genes of ADPKD were measured by q RT-PCR. Herein, Mxi1 transfectants rarely formed a simple epithelial cyst and induced cell death. Overexpression of Mxi1 resulted in a decrease in the PKD1, PKD2 and c-myc mRNA relating to the pathway of cyst formation. These data indicate that Mxi1 influences cyst formation of mIMCD-3 cells in 3-D culture and that Mxi1 may control the mechanism of renal cyst formation.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.340-344
• /
• 2011

Thermoelectric bismuth telluride ($Bi_2Te_3$) films were deposited on $4^{\circ}$ off oriented (001) GaAs substrates using a modified metal organic chemical vapor deposition (MOCVD) system. The effects of substrate temperature on surface morphologies, crystallinity, electrical properties and thermoelctric properties were investigated. Two dimensional growth mode (2D) was observed at substrate temperature lower than $400^{\circ}C$. However, three dimensional growth mode (3D) was observed at substrate temperature higher than $400^{\circ}C$. Change of growth mechanism from 2D to 3D was confirmed with environmental scanning electron microscope (E-SEM) and X-ray diffraction analysis. Seebeck coefficients of all samples have negative values. This result indicates that $Bi_2Te_3$ films grown by modified MOCVD are n-type. The maximum value of Seebeck coefficient was -225 ${\mu}V/K$ and the power factor was $1.86{\times}10^{-3}\;W/mK^2$ at the substrate temperature of $400^{\circ}C$. $Bi_2Te_3$ films deposited using modified MOCVD can be used to fabricate high-performance thermoelectric devices.

• Molecules and Cells
• /
• 제28권5호
• /
• pp.473-477
• /
• 2009

Previously, the 9-mer analog peptides, 9Pbw2 and 9Pbw4, were designed based on a defensin-like peptide, protaetiamycine isolated from Protaetia brevitarsis. In this study, antifungal effects of the analog peptides were investigated. The antifungal susceptibility testing exhibited that 9Pbw4 contained more potent antifungal activities than 9Pbw2. A PI influx assay confirmed the effects of the analog peptides and demonstrated that the peptides exerted their activity by a membrane-active mechanism, in an energy-independent manner. As the noteworthy potency of 9Pbw4, the mechanism(s) of 9Pbw4 were further investigated. The membrane studies, using rhodamine-labeled giant unilamellar vesicle (GUV) and fluorescein isothiocyanate (FITC)-dextran loaded liposome, suggested that the membrane-active mechanism of 9Pbw4 could have originated from the pore-forming action and the radii of pores was presumed to be anywhere from 1.8 nm to 3.3 nm. These results were confirmed by 3D-flow cytometric contour-plot analysis. The present study suggests a potential of 9Pbw4 as a novel antifungal peptide.

• Biomaterials and Biomechanics in Bioengineering
• /
• 제3권3호
• /
• pp.141-155
• /
• 2016

Two-dimensional (2D) cell culture and in vivo cancer model systems have been used to understand cancer biology and develop drug delivery systems for cancer therapy. Although cell culture and in vivo model studies have provided critical contribution about disease mechanism, these models present important problems. 2D tissue culture models lack of three dimensional (3D) structure, while animal models are expensive, time consuming, and inadequate to reflect human tumor biology. Up to the present, scaffolds and 3D matrices have been used for many different clinical applications in regenerative medicine such as heart valves, corneal implants and artificial cartilage. While tissue engineering has focused on clinical applications in regenerative medicine, scaffolds can be used in in vitro tumor models to better understand tumor relapse and metastasis. Because 3D in vitro models can partially mimic the tumor microenvironment as follows. This review focuses on different scaffold production techniques and polymer types for tumor model applications in cancer tissue engineering and reports recent studies about in vitro 3D polymeric tumor models including breast, ewing sarcoma, pancreas, oral, prostate and brain cancers.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1321-1328
• /
• 2009

In this paper, an electromagnetic force driving actuator (EMFA) and three-link mechanism are proposed as a driving mechanism and connection device for low voltage air circuit breaker (ACB). As the result of dynamic characteristic analysis, the actuator and link mechanism are designed from the simulation and manufactured. The magneitc field of the EMFA is analyzed using the finite element method (FEM). The dynamic characteristic analysis with calculation of the circuit equation and kinetical equation is performed by the time difference method (TDM). Also, the result of the analysis is verified through the experiment of the fabrication model. In this paper, the EMFA size is smaller than the actuator for high voltage circuit breaker. Thus, the dynamic characteristic is analyzed with end-winding inductance that is calculated by the same method which is applied on the circle type end-winding of motors. The designed model for 1600 ampere-frame ACB and the three-link mechanism for connecting contact part with actuating part are manufactured. It is confirmed that the three-link mechanism is possible for improving the circuit breaker efficiency and reducing the size of the EMFA. It is proved that the improved 2-D analysis is more accurate than established method.