• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5C
• /
• pp.199-210
• /
• 2012

The effects of tunnelling in weak weathered rock on the behaviour of a pre-existing single pile and pile groups ($3{\times}3$ and $5{\times}5$ pile groups) above a tunnel have been studied by carrying out three-dimensional (3D) elasto-plastic numerical analyses. Numerical modelling of such effects considers the response of the single pile and pile groups in terms of tunnelling-induced ground and pile settlement as well as changes of the shear transfer mechanism at the pile-soil interface due to tunnelling. Due to changes in the relative shear displacement between the pile and the soil at the pile-soil interface with tunnel advancement, the shear stresses and axial pile force distributions along the pile change drastically. Based on the computed results, upward shear stresses are induced up to about Z/L=0.775 from the pile top, while downward shear stresses are mobilised below Z/L=0.775, resulting in a reduction in the axial pile force distribution with depth equivalent to a net increase in the tensile force on the pile. A maximum tensile force of about $0.36P_a$ developed on the single pile solely due to tunnelling, where $P_a$ is the service axial pile loading prior to tunnelling. The degree of interface shear strength mobilisation at the pile-soil interface was found to be a key factor governing pile-soil-tunnelling interaction. Overall it has been found that the larger the number of piles, the greater is the effect of tunnelling on the piles in terms of pile settlement, while changes of the axial pile forces for the piles in the groups are smaller than for a single pile due to the shielding effect. The reduction of apparent allowable pile capacity due to tunnelling-induced pile head settlement was significant, in particular for piles inside the groups.

• Journal of Acupuncture Research
• /
• v.17 no.2
• /
• pp.169-186
• /
• 2000

To study anti-cancer effect and molecular biological mechanism of bee venom for aqua-acupuncture, the effects of bee venom on cell viability, apoptosis, and cell cycle were analyzed using MTT assay, tryphan blue assay, [3H]thymidine release assay, flow cytometric analysis, activity of caspase-3 protease activity assay, and immunocytometric analysis of PCNA. To explore whether anti-cancer effects of bee venom are associated with the transcriptional control of gene expression, quantitative RT-PCR analysis of apoptosis- and cell cycle-related genes was performed. The obtained results are summarized as follows: 1. The MTT assay demonstrated that cell viability was decreased by bee venom in a dose-dependant manner. 2. Significant induction of apoptosis was identified using tryphan blue assay, [$^3H$]thymidine release assay, and flow cytometric analysis of sub $G_1$ fraction. 3. In analysis of caspase-3 protease activity, the activity had increased significantly, in a dose-dependant manner. 4. Quantitative RT-PCR analysis of the apoptosis-related genes showed that Bcl-2 and $Bcl-X_L$ were down-regulated whereas Bax was up-regulated by bee venom treatment. 5. In flow cytometric analysis of cell cycle and immunocytometric analysis of PCNA expression, cell numbers of $G_1$ phase was increased by a dose-dependant manner. 6. In quantitative RT-PCR analysis of the cell cycle-related genes, p21, p27, and p57 were increased, while Cyclin D1, CDK4, c-Myc, c-Fos, and Histone H3 were decreased. In contrast, there were no remarkable changes in expression levels of CDC2 and c-Jun.

• Childhood Kidney Diseases
• /
• v.5 no.2
• /
• pp.78-86
• /
• 2001

Purpose: Rapidly progressive glomerulonephritis (RPGN) is characterized by the rapid increase in serum creatitnin and crescents formation involving more than $50\%$ of glomeruli. 10 patients who had been treated for RPGN were studied retrospectively for thier underlying diseases and clinical features Method: Cilinical review was performed on 10 children who were diagnosed with RPGN by clinical features and renal biopsy and followed up at department of pediatrics during tile last 10 years, from May 1990 to May 2000. Result: There were 6 males and 4 females between the ages of 2.1 and 14.3 years (mean $10.9{\pm}3.8$). 3 had Henoch-$Sch{\ddot{o}}nlein$ purpura nephritis; 2, idiopathic rapidly progressive glomerulonephritis; 2, lupus nephritis; 1, hemolytic uremic syndrome; 1, membranous glomerulonephritis and 1, microscopic polyangiitis. The most common chief complaints were gross hematuria and oliguria. Initial clinical features included proteinuria, edema, hypertension, nausea and arthralgia. Mean serum BUN was $74.2{\pm}39.1\;mg/dL$ mean serum creatinin, $3.2{\pm}1.8\;mg/dL$ and mean creatinin clearance, $26.5{\pm}13.2\;mL/min/1.73m^2$. Antineutrophil cytoplasmic antibody was positive only in microscopic polyangiitis. ANA and Anti-DNA antibody were positive in two lupus nephritis patients. Serum complements were decreased in 4 patients. All patients except Hemolytic uremic syndrome received steroid pulse therapy and immunosupressive agents. 3 patients were performed acute peritoneal dialysis and 2 patients were given plasmapheresis. At the last follow up, 1 patient was dead, 4 patients had elevated serum creatinin, 2 of these 4 patients were on chronic ambulatory peritoneal dialysis and 6 patients had normal renal function. Conclusion: Rapidly progressive glomerulonephritis is a medical emergency that requires very rapid diagnosis, classification, and therapy. Appropriate therapy selected on the basis of underlying disease mechanism can substantially improve renal survival. (J. Korean Soc Pediatr Nephrol 2001 ; 5 : 78-86)

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.392-401
• /
• 1997

The poliovirus is a small, and non-enveloped virus. The RNA genome of poliovirus is continuous, linear, and has a single open reading frame. This polyprotein precursor is cleaved proteolytically to yield mature products. Most of the cleavages occur by viral protease. The mature proteins derived from the P1 polyprotein precursor are the structural components of the viral capsid. The initial cleavage by 2A protease is indirectly involved in the cleavage of a cellular protein p220, a subunit of the eukaryotic translation initiation factor 4F. This cleavage leads to the shut-off of cap-dependent host cell translation, and allows poliovirus to utilize the host cell machinery exclusively for translation its own RNA, which is initiated by internal ribosome entry via a cap-independent mechanism. The functional role of the 2B, 2C and 2BC proteins are not much known. 2B, 2C, 2BC and 3CD proteins are involved in the replication complex of virus induced vesicles. All newly synthesized viral RNAs are linked with VPg. VPg is a 22 amino acid polypeptide which is derived from 3AB. The 3C and 3CD are protease and process most of the cleavage sites of the polyprotein precursor. The 3C protein is also involved in inhibition of RNA polymerase II and III mediated transcription by converting host transcription factor to an inactive form. The 3D is the RNA dependent RNA polymerase. It is known that poliovirus replication follows the general pattern of positive strand RNA virus. Plus strand RNA is transcribed into complementary minus strand RNA that, in turn, is transcribed for the synthesis of plus strand RNA is transcribed into complementary minus strand RNA that, in turn, is transcribed for the synthesis of plus strand RNA strands. Poliovirus RNA synthesis occurs in a membranous environment but how the template RNA and proteins required for RNA replication assemble in the membrane is not much known. The RNA requirements for the encapsidation of the poliovirus genome (packaging signal) are totally unknown. The poliovirus infection cycle lasts approximately 6 hours.

• Journal of Korea Water Resources Association
• /
• v.37 no.3
• /
• pp.219-231
• /
• 2004

The use of air diffuser system to ameliorate the reservoir by breaking stratification is now widespread. This study focuses on the hydrodynamic behavior of bubble plumes, which is the major mechanism of destratification and their combined effect of adjacent plumes on destratification efficiency. By introducing 2-phase Computational Fluid Dynamics(CFD) technique, we could suggest the optimal diffuser spacing having optimal destratification efficiency by simply analyzing the complex destratification procedures varying with the seasonal stratification intensity and bubble flow rate. Lab experiments were also carried out to verify CFD model in thermally stratified fresh water which quite differs from former researches using salts. This study showed that the mixing efficiency strongly depends on the spacing of neighboring plumes. When diffuser spacing is lower than 1.5 times the depth, the combined effect is stronger; as Plume Number(PN) is increased, the efficiency is strongly affected by spacing. If the distance is shorter than the depth of water, the efficiency increases linearly in proportion to PN. Otherwise, the efficiency increases non-linearly. These findings suggest that the combined effect should be more quantitatively taken into consideration for design and operation of air-diffuser destratification system, and recommend that the optimal destratification efficiency will be when plume number is 1000 and the spacing between neighboring diffusers is 1.5 times the depth.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.53-64
• /
• 2009

MIRIS is the main payload of the STSAT-3 (Science and Technology Satellite 3) and the first infrared space telescope for astronomical observation in Korea. MIRIS space observation camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}\times3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200 K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI (Multi Layer Insulation) of 30 layers, and GFRP (Glass Fiber Reinforced Plastic) pipe support in the system. Optomechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.423-428
• /
• 2009

Selenium was investigated using human origin preadipocytes to see whether it possesses preventive or therapeutic effects for obesity. Unveiling the potential of selenium in the reduction of adipogenesis can help predict the therapeutic capabilities of selenium in obesity. In the present study, the molecular mechanism of the inhibition of adipogenesis by selenium was explored to unravel the involvement of the AMP-activated protein kinase. There is emerging evidence that AMPK, a sensor of cellular energy status, is a possible molecular target of controlling adipocyte differentiation on the basis of discovery that AMPK is responsible for the major metabolic responses to exercise, and integration of nutritional and hormonal signals to modulate feeding behavior or energy expenditure in the hypothalamus. Treatment of selenium resulted in inhibition of the adipocyte differentiation process and induction of mature apoptosis in 3T3-L1 adipocytes. We hypothesized that selenium may exert anti-adipogenic potential though modulating AMPK. We have found that selenium significantly activated AMPK and phosphorylated its substrate acetyl-CoA carboxylase ($ACC-serine^{79}$) during the inhibitory process of adipocytes. Also, the inhibition process of adipocyte differentiation by selenium was comparable to either reveratrol or a synthetic AMPK activator, AICAR (5-aminoimidazole-4-carboxamide-1-${\beta}$-D-ribofuranoside). To evaluate the involvement of AMPK in anti-lipogensis, we applied AICAR and Compound C, an AMPK inhibitor, to 3T3-L1-adipocytes and found that AMPK is required for the adipocyte differentiation blocking process. These results suggest that selenium has a potential to control adipogenesis and that this effect is mediated by AMPK, an essential kinase for both inhibition of adipocyte differentiation and apoptosis of mature adipocytes.

• Journal of Food Hygiene and Safety
• /
• v.26 no.3
• /
• pp.235-241
• /
• 2011

Although the vegetable Angelica keiskei (AK) has widely been utilized for the purpose of general health improvement among Korean population, its functionalities are not very well defined. In this study, we examined the effects of methanol extract of AK in rats on the biochemical changes induced by two hepatotoxins, D-galactosamine (GalN) and carbon tetrachloride ($CCl_4$). AK was orally administered once daily for 7 days to male rats at 200 and 500 mg/kg, before hepatotoxins. Effects of AK were assessed 24 hr later. AK pretreatments at 200 and 500 mg/kg significantly blunted GalN-induced elevation in liver lipid peroxidation, plasma aspartate-transaminase (AST) and alanine-transaminase (ALT) activities. AK also prevented, after 500 mg/kg but not after 200 mg/kg, the GalN-induced elevation in triglyceride, total cholesterol and LDL-cholesterol levels. Differently from against GalN-induced toxicity, AK did further elevate the $CCl_4$-induced rise in AST, ALT and lipid peroxidation. These results suggest that AK, when pre-administered prior to GalN, exerted protective effects against GalN-induced hepatotoxicity, in contrast however, AK exacerbated that induced by $CCl_4$. To explore possible mechanism for the toxicity-potentiating effects of AK on $CCl_4$, the activity of hepatic drug metabolism after AK treatment was assessed. It was observed that AK increased the activity of aniline hydroxaylase, a cytochrome P450 isoenzyme responsible for metabolic activation of $CCl_4$. This finding suggests that hepatoprotective effects of AK are not equally expected depending on hepatotoxins employed.

• The Korean Journal of Physiology and Pharmacology
• /
• v.17 no.4
• /
• pp.253-257
• /
• 2013

This study examined the mechanism of action of a local anesthetic, lidocaine HCl. Energy transfer between the surface fluorescent probe, 1-anilinonaphthalene-8-sulfonic acid, and the hydrophobic fluorescent probe, 1,3-di(1-pyrenyl) propane, was used to determine the effect of lidocaine HCl on the thickness (D) of the synaptosomal plasma membrane vesicles (SPMV) isolated from the bovine cerebral cortex, and liposomes of the total lipids (SPMVTL) and phospholipids (SPMVPL) extracted from the SPMV. The thickness (D) of the intact SPMV, SPMVTL and SPMVPL were $1.044{\pm}0.008$, $0.914{\pm}0.005$ and $0.890{\pm}0.003$ (arbitrary units, n=5) at $37^{\circ}C$ (pH 7.4), respectively. Lidocaine HCl decreased the thickness of the neuronal and model membrane lipid bilayers in a dose-dependent manner with a significant decrease in the thickness, even at 0.1 mM. The decreasing effect of lidocaine HCl on the membrane thickness might be responsible for some, but not all of its anesthetic action.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2430-2434
• /
• 2005

Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.