• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권2호
• /
• pp.151-159
• /
• 2005

The purpose of this study was to evaluate the nasal deviation in mandibular prognathism with mandibulo-facial asymmetry. There were 40 patients whose mandibular prognathism with/without facial asymmetry were treated with orthognathic surgery from March 2002 to October 2003. The Group A(n=20) had a mandibulo-facial asymmetry over 6mm menton deviation in cephalogram PA and the Group B(n=20) had a mandibular prognathism. The preoperative frontal photograph, cephalogram PA and three dimensionalcomputed tomography(divided in hard tissuse image and soft tissue image) of two group was evaluated NDA(nasal deviation angle) and MDA(mandibular deviation angle). The NDA was statistical difference between asymmetry Group A and symmetry Group B(p<0.01), and was deviated in affected side of asymmetry. The MDA were also statistical difference between Group A and Group B(p<0.01), however the measurements of MDA between the frontal photograph, 3D-CT and cephalogram PA were similar to each others. The low correlation of NDA between frontal photograph and cephalogram PA in Group A and B demonstrate that we couldn't assess nasal deviation in cephalogram PA. It could be concluded that patients with mandibulo-facial asymmetry have a nasal deviation and clinician must remember this fact when they assess and treat patients.

• Geomechanics and Engineering
• /
• 제21권5호
• /
• pp.423-432
• /
• 2020

Hydraulic conductivity is one of the engineering properties of soil. This study focusses on the influence of cement content on the hydraulic conductivity of cemented sand, which is investigated based on the results from numerical analysis and laboratory testing. For numerical analysis the cemented samples were scanned using X-ray Computed Tomography (CT) while laboratory testing was carried out using a triaxial setup. Numerical analysis enables us to simulate flow through the sample and provides insight to the microstructure. It quantifies the pore volume, proportion of interconnected voids and pore size distribution in both cemented and uncemented samples, which could be computed only through empirical equations in case of laboratory testing. With reduction in global voids, the interconnecting voids within the samples also reduce with cement content. Gamma cumulative distribution function is used to predict the percentage of voids lesser than a given pore volume. Finally, the results obtained from both numerical analysis and laboratory testing are compared.

• 한국정보처리학회논문지
• /
• 제3권5호
• /
• pp.1329-1336
• /
• 1996

많은 영상 데이타 압축 응용분야에서 DCT는 높은 압축 성능으로 인하여 널리 잘 알려져 있다. 그러나 낮은 비트율에서는 인간의 시각에 거슬리는 블록 효과(block artifacls)가 생기는 문제점을 가지고 있다. 또한 실제적인 응용에 있어서, DCT계수의 빠른 계산과 간단한 VLSI 구현도 중요한 과제이다. 따라서 블록 효과의 제거와 빠른 CT 계산은 실제적인 연구의 대상이 된다. 본 논문에서는 수정된 DCT 계산 방법을 연구 하였고, 이것은 빠른 계산과 함께 블록 효과를 효과적으로 제거할 수 있었다. 이러한 새로운 접근 방법을 낮은 비트 율에서 영상의 부호화 및 복호화에 적용하였다. 실제 영상을 대상으로 실험한 결과, 제안된 방법을 통해 표준적인 방법에 비하여 성능을 개선할 수 있었다.

• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.913-920
• /
• 2012

단층촬영 영상정보를 이용하여 근육, 연부조직 및 골 구조 등을 포함한 발의 상세한 유한요소해석모델을 개발하여 보행과정을 모사하였고, 발과 직접 접촉하는 신발밑창 형상의 고려 여부에 따른 보행 중의 발바닥 압력의 변화를 비선형 접촉해석으로 계산하였다. 해석결과 직립 정지상태나 보행 중에는 공통으로 뒤꿈치가 지면에 닿을 때 압력집중이 가장 높았으며, 편평한 밑창보다 발바닥 곡면과 같은 밑창을 사용한 보행해석에서 뒤꿈치의 압력집중이 덜하고 접촉면이 더 넓었다. 이러한 보행모델 및 해석은 발바닥의 압력집중에 취약한 당뇨병 환자 전용 의료보조신발(압력을 넓게 분포시켜 집중의 강도를 낮출 수 있는) 개발의 수단으로 활용될 수 있음을 보였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권6호
• /
• pp.552-558
• /
• 2005

Orthognathic surgery changes patient's mandibular position and environment of related anatomic structures. Many clinicians were interested in these changes and studied about this problem. However, most of them were based on two dimensional cephalogram. According to the development of image and computer system, it would be possible that the airway change is analyzed with three dimensional CT. So we tried to measure the volumetric change of airway and analyzed the relationship between the airway structure and volumetric change. Nineteen patients who experienced orthognathic surgery due to mandibular prognathism were analyzed with 3D CT data (preoperative and postoperative 6 months) and 2D lateral cephalometry. Volumetric change was measured and 3 dimensional change of related structure was assessed with simulation program ($V-works^{(R)}$, 4.0 Cybermed, Korea). Ten patients showed the decrease of airway volume change and nine showed the increase of airway volume change. Volumetric change was determined by dimensional change of mandible and hyoid bone. The dimensional positions of mandible and hyoid bone were the key factor for determining the airway change after surgery. Airway change is also predictable with the dimensional change of mandible and hyoid bone.

• Imaging Science in Dentistry
• /
• 제36권1호
• /
• pp.49-54
• /
• 2006

Purpose : To evaluate accuracy and reliability of program to measure facial soft tissue thickness using 3D computed tomographic images by comparing with direct measurement. Materials and Methods : One cadaver was scanned with a Helical CT with 3 mm slice thickness and 3 mm/sec table speed. The acquired data was reconstructed with 1.5 mm reconstruction interval and the images were transferred to a personal computer. The facial soft tissue thickness were measured using a program developed newly in 3D image. For direct measurement, the cadaver was cut with a bone cutter and then a ruler was placed above the cut side. The procedure was followed by taking pictures of the facial soft tissues with a high-resolution digital camera. Then the measurements were done in the photographic images and repeated for ten times. A repeated measure analysis of variance was adopted to compare and analyze the measurements resulting from the two different methods. Comparison according to the areas was analyzed by Mann-Whitney test. Results : There were no statistically significant differences between the direct measurements and those using the 3D images (p>0.05). There were statistical differences in the measurements on 17 points but all the points except 2 points showed a mean difference of 0.5 mm or less. Conclusion : The developed software program to measure the facial soft tissue thickness using 3D images was so accurate that it allows to measure facial soft tissues thickness more easily in forensic science and anthropology.

• 한국의학물리학회지:의학물리
• /
• 제25권3호
• /
• pp.167-175
• /
• 2014

본 연구는 IMRT가 적용된 성문암 환자에 대하여 CBCT영상과 변형영상 정합기법을 이용하여 치료기간 동안 실제 환자에게 전달되는 선량 변화를 평가하고자 하였다. B-spline 알고리즘을 사용한 변형영상정합 시스템을 통해 치료 중 1주 간격으로 얻은 CBCT를 재구성하고 치료계획을 재계산하여 종양과 결정장기의 선량 분포를 비교하였다. 체중에 따른 체적변화는 3~5 주부터 평균 1.38~2.04 kg로 증가하였으며 체표면의 변화는 평균 2.1 mm로 감소하였다. 또한, 3주 이후의 경동맥에 전달된 선량은 계획되었던 값보다 최대 8.76%로 증가하였고, 갑상선샘은 26.4%로 감소하였다. 종양의 물리적의 평가인자인 PITV, TCI, rDHI, mDHI 그리고, CN은 치료 계획된 값보다 각각 평균 4.32%, 5.78%, 44.54%, 12.32% 그리고, 7.11%로 감소하였다. PTV에 대한 $D_{max}$는 평균 2.99% 증가하였고, $D_{mean}$, $V_{67.50}$, $D_{95}$는 각각 평균 1.52%, 5.78%, 11.94%로 감소하였다. 체중변화에 따른 체적의 변화가 없더라도 체형변화는 발생하였고, 좁은 여유마진을 가지는 IMRT는 이러한 변화에 민감하게 반응하였다. 성문암에 대한 IMRT 적용 시 환자의 체중변화를 관찰과 함께 변화를 기록하고 치료 중 변형영상정합 시스템을 이용하여 선량분포를 평가할 필요가 있다. 최종적으로 치료 중 실제 전달되는 선량평가는 적응형치료계획을 통하여 확인하고 정확한 선량전달이 필요하다고 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권4호
• /
• pp.350-359
• /
• 2005

Sagittal split ramus osteotomy(SSRO) has been commonly performed in the mandibular prognathism. The previous studies of the mandibular anatomy for SSRO have mostly been used in dry skull without consideration of age, sex or jaw relationship of patients. This study was performed to evaluate the location of mandibular canal and the anatomy of ramus, such as the location of mandibular lingula and the ramal bone marrow, which were associated with SSRO procedures, in the patients with mandibular prognathism and normal young adults by using computerized tomographs(CT) and 3D images. The young adults at their twenties, who were considered to complete their skeletal growth, and seen in the Department of Orthodontics and Oral and Maxillofacial Surgery in Chonnam National University Hospital between March 2000 and May 2003, were selected. This study was performed in 30 patients (15men, 15women) who were diagnosed as skeletal class I normal relationship, and another 30 patients (15men, 15women) who were diagnosed as skeletal class III relationship upon clinical examination and lateral cephalometric radiographs. The patients were divided into 2 groups : Class I group, the patients who had skeletal class Ⅰ normal relationship(n=30, 15men, 15women), and Class III group, the patients who had skeletal class III relationship(n=30, 15men, 15women). Facial CT was taken in all patients, and pure 3D mandibular model was constructed by V-works version 4.0. The occlusal plane was designed by three points, such as the mesiobuccal cusp of both mandibular 1st molar and the incisal edge of the right mandibular central incisor, and used as a reference plane. Distances between the tip of mandibular lingula and the occlusal plane, the sigmoid notch, the anterior and the posterior borders of ramus were measured. The height of ramal bone marrow from the occlusal plane and the distance between mid-point of mandibular canal and the buccal or lingual cortex of the mandible in the 1st and 2nd molars were measured by V-works version 4.0. Distance(Li-OP) between the occlusal plane and the tip of mandibular lingula of Class III Group was longer than that of Class I Group in men(p<0.01), but there was no significant difference in women between both groups. Distance(Li-SN) between the sigmoid notch and the tip of mandibular ligula of Class III group was longer than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(Li-RA) between the anterior border of ramus and the tip of mandibular lingula of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Distance(Li-RP) between the posterior border of ramus and the tip of mandibular lingula of Class III Group was slightly shorter than that of Class I Group in men(p<0.05), but there was no significant difference in women between both groups. Distance(RA-RP) between the anterior and the posterior borders of ramus of Class III Group was shorter than that of Class I Group in men and women(p<0.01). Longer the distance(SN-AN) between the sigmoid notch and the antegonial notch was, longer the vertical ramal length above occlusal plane, higher the location of mandibular lingula, and shorter the antero-posterior ramal length were observed(p<0.01). Height of ramal bone marrow of Class III Group was higher than that of Class I Group in men and women(p<0.01). Distance between mandibular canal and buccal cortex of Class III Group in 1st and 2nd lower molars was shorter than that of Class I Group in men and women (p<0.05 in 1st lower molar in men, p<0.01 in others). These results indicate that there are some anatomical differences between the normal occlusal patients and the mandibular prognathic patients, such as the anterior-posterior length of ramus, the height of ramal bone marrow, and the location of mandibular canal.

• 핵의학기술
• /
• 제21권1호
• /
• pp.15-22
• /
• 2017

본원에서 시행하는 Brain SPECT 검사는 $^{99m}Tc-ECD$ 또는 $^{99m}Tc-HMPAO$를 주사 한 후 뇌 영상을 얻어 뇌 관류상태를 평가하는 검사이다. 하지만 검사 중 일부 환자 상태가 불안정할 경우 움직임이 발생하여 재촬영이나 검사실패로 이어지는 경우가 발생 된다. 이에 현재의 Step and Shoot Mode(SSM)이 아닌 움직임이 발생되더라도 재구성을 통해 영상 구현이 가능한 Dynamic Continuous Mode(DCM)를 적용하여 환자의 재촬영과 피폭선량을 감소시키고 검사실에 운영 효율성을 높이고자함에 있다. Deluxe PET/SPECT Phantom과 Hoffman 3D Brain Phantom으로 Filtered Back Projection(FBJ)과 Iterated Reconstruction(IR)으로 재구성하여 영상을 구현하였다. 이미지를 가지고 핵의학과 5년이상의 임상경력이 있는 의사 5명과 방사선사 5명을 대상으로 리커트 5점 척도(Likert 5 Scale)와 블라인드 판독 테스트를 실시 하였다. 판독의 블라인드 테스트 결과 최소 DCM 3Repeat (30%)에서 7Repeat (50%)까지 판독에 영향을 주지 않는다고 답해 주었다. DCM으로 검사 시 환자 움직임이 발생되면 불필요한 부분을 제거하여 재촬영, 재주사의 감소를 가져올 수 있고, 장비 오류 시 영상을 재구성 후 구현 할 수 있어 검사실 운영 효율도 높을 수 있을 것으로 기대된다. 또한 SPECT검사뿐 만 아니라 SPECT/CT검사 에서도 활발한 연구가 적용 될 거라 기대 되며 마지막으로 실제 환자 적용은 환자 데이터의 충분한 수집 후 병원 판독 실정에 맞게 도입이 필요 하리라 사료된다.

• 대한의용생체공학회:의공학회지
• /
• 제37권2호
• /
• pp.68-74
• /
• 2016

In this study, we investigated the rotational characteristics which were comprised of directionality and linearity of target registration error (TRE) as a study in advance to enhance the accuracy of contour-based registration in neuronavigation. For the experiment, two rigid head phantoms that have different faces with specially designed target frame fixed inside of the phantoms were used. Three-dimensional coordinates of facial surface point cloud and target point of the phantoms were acquired using computed tomography (CT) and 3D scanner. Iterative closest point (ICP) method was used for registration of two different point cloud and the directionality and linearity of TRE in overall head were calculated by using 3D position of targets after registration. As a result, it was represented that TRE had consistent direction in overall head region and was increased in linear fashion as distance from facial surface, but did not show high linearity. These results indicated that it is possible for decrease TRE by controlling orientation of facial surface point cloud acquired from scanner, and the prediction of TRE from surface registration error can decrease the registration accuracy in lesion. In the further studies, we have to develop the contour-based registration method for improvement of accuracy by considering rotational characteristics of TRE.