• Structural Engineering and Mechanics
• /
• 제57권3호
• /
• pp.425-439
• /
• 2016

This paper deals with the behavior of fresh concrete that is under vibration using mass-spring model (MSM). To this end, behaviors of two different full scale precast concrete molds were investigated experimentally and theoretically. Experiments were performed under vibration with the use of a computer-based data acquisition system. Transducers were used to measure time-dependent lateral displacements at some points on mold while mold is empty and full of fresh concrete. Analytical modeling of molds used in experiments were prepared by three dimensional finite element method (3D FEM) using software. Modeling of full mold, using MSM, was made to solve the problem of dynamic interaction between fresh concrete and mold. Numerical displacement histories obtained from time history analysis were compared with experimental results. The comparisons show that the measured and computed results are compatible.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 1999년도 추계학술대회
• /
• pp.565-574
• /
• 1999

In reverse engineering area, it is rapidly developing reconstruction of surfaces from scanning or digitizing data, but geometric models of existing objects unavailable many industries. This paper describes new methodology of reverse engineering area, good strategies and important algorithms in reverse engineering area. Furthermore, proposing reconstruction of surface technique is presented. A method find base geometry and blending surface between them. Each based geometry is divided by triangular patch which are compared their normal vector for face grouping. Each group is categorized analytical surface such as a part of the cylinder, the sphere, the cone, and the plane that mean each based geometry surface. And then, each based geometry surface is implemented infinitive surface. Infinitive average surface's intersections are trimmed boundary representation model reconstruction. This method has several benefits such as the time efficiency and automatic functional modeling system in reverse engineering. Especially, it can be applied 3D scanner and 3D copier.

• 콘크리트학회논문집
• /
• 제26권1호
• /
• pp.57-62
• /
• 2014

이 연구에서는 수직으로 긴 매스 구조물에 적합한 파이프쿨링 공법을 제안하기 위하여 기존의 파이프쿨링 공법과는 달리 파이프를 수직으로 설치하는 연직파이프쿨링 공법을 개발하였다. 타당성을 검토하기 위하여 해석대상 부재의 형상($1{\times}3{\times}20m$, $4{\times}4{\times}4m$)을 대상으로 하여 FEM 해석을 수행하였으며, 온도 및 응력 변화와 온도균열 지수 등을 검토하였다. 그 결과, 매스콘크리트 구조물의 온도균열 제어에 효과가 있는 것을 확인할 수 있었다.

• 한국정밀공학회지
• /
• 제18권4호
• /
• pp.129-134
• /
• 2001

It is essential to predict the welding deformation at assembly stage, to increase productivity through mechanization and automation effectively. A practical analysis method appled for production engineering was proposed to simulate the deformation of arc welding, with an analytical model using finite element method solving thermal-elastic-plastic behavior. In this research, for accurate assembling, 3-D thermal-elastic-plastic finite element model is used to simulate the out-of-plane deformation caused by arc welding. Efforts have been made to find out the efficient method to improve the reliability and accuracy of the numerical calculation. Each of theories of small and large deformation is applied in solving 3-D thermal-elastic-plastic problem to compare with their efficiency about calculation imes and solution accuracy. When solid elements are used in a bending problem of a plate, phenomenon that the predictive deformation is more than that of actual survey is observed. To prevent this phenomenon, reduced integration method for element is employed instead of full integration that is generally used in 3-D thermal-elastic-plastic analysis.

• 분석과학
• /
• 제28권1호
• /
• pp.1-7
• /
• 2015

4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK), a tobacco specific nitrosamine found only in tobacco products. The ability to monitor biomarker concentrations is very important in understanding environmental tobacco smoke (ETS). In this study, an efficient and sensitive method for the analysis of NNK in dust was developed and validated using liquid chromatography tandem mass spectrometry. Dust was collected with filter paper soaked in methanol. The standard solution and dust sample were diluted with 100 mM ammonium acetate and extracted using dichloromethane. Our calibration curves ranged from 25 to $10^4pg/mL$. Excellent linearity was obtained with correlation coefficient values between 0.9996 and 1.0000. The limit of detection (LOD) was 5 pg/mL ($S/N{\geq}3$) and the retention time was 10 min. The limit of quantification (LOQ) was 25 pg/mL, and the acceptance criteria was the rate of 98-103% (80-120% at levels up to $3{\times}LOQ$). The coefficient of variations (CV) was 2.8%. Accuracies determined from dust samples spiked with four different levels of NNK racurves ranged that from 25 to 104 pg/mL. Excellent linearity was obtained between 92.1% and 114%. The precision of the method was acceptable (5% of CV). The recovery rates of the whole analytical procedure at low, medium, and high levels were 105.7-116.5% for NNK. The carry-over effects during LC-MS/MS analysis were not observed for NNK. This manuscript summarizes the scientific evidence on the use of markers to measure ETS.

• Geomechanics and Engineering
• /
• 제28권5호
• /
• pp.437-454
• /
• 2022

The hydro-mechanical (HM) two-way sequential coupling in the TOUGH2-FLAC3D linking algorithm is validated completely and successfully in both M to H and H to M directions, which are initiated by mechanical surface loading for geomechanical validation and hydrological groundwater pumping for hydrogeological validation, respectively. For such complete and successful validation, a TOUGH2-FLAC3D linked numerical model is developed first by adopting the TOUGH2-FLAC3D linking algorithm, which uses the two-way (fixed-stress split) sequential coupling scheme and the implicit backward time stepping method. Two geomechanical and two hydrogeological validation problems are then simulated using the linked numerical model together with basic validation strategies and prerequisites. The second geomechanical and second hydrogeological validation problems are also associated with the Mandel effect and the Noordbergum and Rhade effects, respectively, which are three phenomenally well-known but numerically challenging HM effects. Finally, sequentially coupled numerical solutions are compared with either analytical solutions (verification) or fully coupled numerical solutions (benchmarking). In all the four validation problems, they show almost perfect to extremely or very good agreement. In addition, the second geomechanical validation problem clearly displays the Mandel effect and suggests a proper or minimum geometrical ratio of the height to the width for the rectangular domain to maximize agreement between the numerical and analytical solutions. In the meantime, the second hydrogeological validation problem clearly displays the Noordbergum and Rhade effects and implies that the HM two-way sequential coupling scheme used in the linked numerical model is as rigorous as the HM two-way full coupling scheme used in a fully coupled numerical model.

• Journal of Mechanical Science and Technology
• /
• 제16권3호
• /
• pp.310-319
• /
• 2002

This paper deals with the analytical modeling, and the experimental verification of the strain rate self-sensing method using a hybrid adaptive filter for a cantilevered piezoelectric beam. The piezoelectric beam consists of two laminated lead zirconium titanates (PZT) on a metal shim. A mathematical model of the beam dynamics is derived by Hamilton's principle and the accuracy of the modeling is verified through the comparison with experimental results. For the strain rate estimation of the cantilevered piezoelectric beam, a self-sensing mechanism using a hybrid adaptive filter is considered. The discrete parts of this mechanism are realized by the DS1103 DSP board manufactured by dSPACE$\^$TM/. The efficacy of this method is investigated through the comparison of experimental results with the predictions from the derived analytical model.

• Composites Research
• /
• 제29권6호
• /
• pp.347-352
• /
• 2016

적층 복합재료 주름판에 대한 진동특성을 이론적 방법을 이용하여 분석하였다. 고려된 주름 형상은 사다리꼴을 기본으로 삼각형, 사각형 및 요각 사다리꼴형이다. 3차원 주름 구조물을 해석적으로 기계적 거동을 표현하는 것이 매우 어렵기 때문에 본 해석에서는 주름판의 진동특성을 분석하기 위해 등가균질모델을 적용하였다. 이를 위해 단위 주름을 직교이방성재료로 등가시켰으며, 해석에서 등가 신장 강성 및 굽힘 강성이 모두 고려되었다. 이론해석 결과의 타당성을 검증하기 위해 셸요소를 적용한 3차원 유한요소해석을 수행하였으며, 두 방법을 이용해 얻은 고유진동수 및 진동형상을 비교하였다. 주름판의 기하형상에 따른 영향을 분석하기 위해 다양한 수치예가 제시되었다.

• 분석과학
• /
• 제9권3호
• /
• pp.221-234
• /
• 1996

흔적량 금속이온인 Ag(I), Pd(II), Au(III) 및 Pt(IV)의 dibenzylammonium dibenzyldithiocarbamate(DBADBDC) 착물을 용매추출하기 위한 기초적인 연구를 수행하였다. 클로로포름으로 리간드 및 금속착물을 추출하기 위한 pH의 영향을 조사한 결과, DBADBDC는 pH 2~9에서 일정하게 추출되었으며 금속착물의 경우 Ag(I)는 산성용액에서, Pd(II) 는 pH 4 이상에서, Au(III)는 모든 pH 영역에서, Pt(IV)는 pH 3 이상에서 일정하게 추출되었다. 금속-DBDC 착물의 수용액과 용매간 분배 및 추출평형에서 분포비와 추출률은 Ag(I)의 경우 pH 0에서 log D=4.226 : E(%)=99.9%, Pd(II)는 pH 4~7에서 log D=1.804 ; E(%)=98.5%, Au(III)는 pH 2~10에서 log D=3.755: E(%)=99.9%, Pt(IV)는 pH 8에서 log D=0.165 : E(%)=57.2%의 최대값을 나타내었다. 몰비법으로 금속이온과 리간드가 착물을 형성할 때의 결합비를 조사해 보았다. Ag(I)는 1 : 1, Pd(II), Au(III) 및 Pt(IV)는 1 : 2의 착물을 형성하였으며, Au(III) 와 Pt(IV)는 착물내에 염화이온이 포함되어 있었다. 수용액에 염화이온이 존재할 때의 금속-클로로 착물의 추출반응을 규명할 수 있었으며, 각 금속이온을 착화제인 DBADBDC로보 추출할 때 각각의 추출반응과 상수식을 얻을 수 있었다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권2호
• /
• pp.94-101
• /
• 2001

Fin effectiveness and efficiency of a thermally asymmetric rectangular fin are represented as a function of non-dimensional fin length, width, fip tip surface Biot number and the ratio of fin bottom surface Biot number to top surface Biot number. For this analysis, three dimensional separation of variables method is used. One of the results shows that fin effectiveness can be increased or decreased depending on the fin length as the fin tip surface Biot number increases while fin efficiency decreases without depending on that as the fin tip surface Biot number increases.