Browse > Article
http://dx.doi.org/10.12989/sem.2016.57.3.425

Investigation of fresh concrete behavior under vibration using mass-spring model  

Aktas, Gultekin (Department of Civil Engineering, Dicle University)
Publication Information
Structural Engineering and Mechanics / v.57, no.3, 2016 , pp. 425-439 More about this Journal
Abstract
This paper deals with the behavior of fresh concrete that is under vibration using mass-spring model (MSM). To this end, behaviors of two different full scale precast concrete molds were investigated experimentally and theoretically. Experiments were performed under vibration with the use of a computer-based data acquisition system. Transducers were used to measure time-dependent lateral displacements at some points on mold while mold is empty and full of fresh concrete. Analytical modeling of molds used in experiments were prepared by three dimensional finite element method (3D FEM) using software. Modeling of full mold, using MSM, was made to solve the problem of dynamic interaction between fresh concrete and mold. Numerical displacement histories obtained from time history analysis were compared with experimental results. The comparisons show that the measured and computed results are compatible.
Keywords
mass spring model (MSM); precast concrete mold; compaction of fresh concrete; vibration; modeling of full scale mold; 3D finite element method; dynamic interaction of fresh concrete-mold;
Citations & Related Records
Times Cited By KSCI : 3  (Citation Analysis)
연도 인용수 순위
1 Alexsandridis, A. and Gardner, N.J. (1981), "Mechanical behaviour of fresh concrete", Cement Concete Res., 11(3), 323-339.   DOI
2 Goudarzi, M.A. and Sabbagh-Yazdi, S.R. (2009), "Numerical investigation on accuracy of mass spring models for cylindrical tanks under seismic excitation", Int. J. Civil Eng., 7(3), 190-202.
3 Goudarzi, M.A. and Alimohammadi, S. (2010), "Numerical assessment of seismic safety of liquid storage tanks and performance of base isolation system", Struct. Eng. Mech., 35(6), 759-772.   DOI
4 Hakkak, E.C. (2012), "Dynamic behavior of theoretical and experimental investigation of steel water tank", Master Thesis., Department of Civil Engineering, Cukurova University, Turkey.
5 Haroun, M.A. and Housner, G.W. (1981), "Seismic design of liquid storage tanks", J. Tech. Count., ASCE, 107, 191-207.
6 Housner, G.W. (1954), "Earthquake pressures on fluid containers", Eighth Technical Report under Office of Naval Research, Project Designation No. 081-095, California Institute of Technology, Pasadena, California.
7 Housner, G.W. (1957), "Dynamic pressures on accelerated fluid containers", Bull. Seis. Soc. Am., 47(1), 15-35.
8 Larrard, F.D., Hu, C., Sedran. T., Szitkar. J.C., Jolt. M., Claux. F. and Derkx, F. (1997), "New rheometer for soft-to-fluid fresh concrete", ACI Mater. J., 94(3), 234-243.
9 Malhotra, P.K., Wenk, T. and Wieland, M. (2000), "Simple Procedures for Seismic Analysis of Liquid Storage Tanks", Struct. Eng. Int., 10(3), 197-201.   DOI
10 SAP2000(R)(1999), Integrated Finite Element Analysis and Design of Structures, Computers and Structures, Inc., Berkeley, California, USA.
11 Seleemah, A.A. and El-Sharkawy, M. (2011), "Seismic analysis and modeling of isolated elevated liquid storage tanks", Earthq. Struct., 2(4), 397-412.   DOI
12 Tattersall, G.H. and Baker, P.H. (1988), "Effect of vibration on the rheological properties of fresh concrete", Mag. Concete Res., 40(143), 79-89.   DOI
13 TEC Turkish Earthquake Code (2007), Specification for Structures to be Built in Disaster Areas, Ministry of Public Works and Settlement, Government of Republic of Turkey, Ankara.
14 Thomas, J. and Harilal, B. (2014), "Fresh and hardened properties of concrete containing cold bonded aggregates", Adv. Concete Const., 2(2), 77-89.   DOI
15 U.S. Department of Transportation (2003), "Poission's fatio and temperature gradient adjustments", HIPERPAV Validation Model Summary, Federal Highway Administration Research, Technology, and Development Turner-Fairbank Highway Research Center 6300 Georgetown Pike McLean, Virginia 22101-2296, 1-4.
16 Veletsos, A.S. and Yang, J.Y. (1976), "Dynamics of Fixed-Base Liquid Storage Tanks", Proceedings of U.S.-Japan Seminar for Earthquake Engineering Research with Emphasis on Lifeline Systems, Tokyo, Japan.
17 Wenzel, D. (1986), "Compaction of concrete - principles, practice, special problems", Beton. Fert. Tech., 52(3), 153-158.
18 Wilson, E.L., Yuan, M.W. and Dickens, J.M. (1982), "Dynamic analysis by direct superposition of ritz vectors", Earthq. Eng. Struct. Dyn., 10, 813-823.   DOI
19 Aktas, G., Tanrikulu, A.K. and Baran, T. (2014), "Computer-aided mold design algorithm for precast concrete elements", ACI Mater. J., 111(1), 77-87.
20 Aktas, G. and Karasin, A. (2014), "Experimental confirmation for the validity of Ritz method in structural dynamic analysis", J. Theor. App. Mech., 52(4), 981-993.