• 제어로봇시스템학회논문지
• /
• 제19권3호
• /
• pp.233-239
• /
• 2013

This paper presents the analysis and control of the position of the COG (Center of Gravity) for a two-wheel balancing robot. The two-wheel balancing robot is required to maintain balance by driving two wheels only. Since the robot is not exactly symmetrical and its dynamics is changing with respect to moving parts, robust balancing control is difficult. Balancing performance becomes difficult when two arms hold a heavy object since the center of gravity is shifted out of the wheel axis. Novel design of a sliding waist mechanism allows the robot to react against the shift of the COG by moving the whole upper body to compensate for the imbalance of the mass as a counter balancer. To relocate the COG position accurately, the COG is analyzed by force data measured from two force sensors. Then the sliding COG mechanism is utilized to control the sliding waist position. Experimental studies are conducted to confirm the proposed design and method.

• 한국산업융합학회 논문집
• /
• 제18권3호
• /
• pp.139-149
• /
• 2015

In this paper, we describe a new approach to perform real-time implementation of an robust controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for robot manipulator consisting of dual arm with eight degrees of freedom at the joint space and cartesian space.

• 산업기술연구
• /
• 제19권
• /
• pp.173-178
• /
• 1999

In many areas of technology there are machines and systems controllable in up to six degrees of freedom. Helicopters and underwater vehicles, industrial robots are among the first representatives of this category. They need six degrees of freedom in order to move and orient within their workspace. An even broader and more explosively growing area is 3D computer graphics and virtual environment. In this work, functions of 3D input device are described and two types of commercial 3D input device are presented. Then, a preliminary experiment of a low cost 6 axis force/moment sensor is presented that can also be sued as a 3D input device. A low cost force/moment sensor and its application in robot teaching experiment is described. It computes the direction of 3 components of the force and 3 components of the moment applied by human holding the sensor by hand. The concept is shown by an experiment where the tool position and orientation of a robot in 3 dimensional space is controlled by the proposed sensor.

• 대한기계학회논문집A
• /
• 제38권2호
• /
• pp.129-136
• /
• 2014

기동형 경계 로봇의 목표 추적 시스템은 효율적인 경계 임무를 수행하는데 있어서 중요한 부분이다. 본 논문은 영상 장치를 포함한 3 축 기동형 경계로봇의 영상 정보를 이용한 목표 추적 알고리즘을 제안하였다. 제안된 목표추적 알고리즘에서는 카메라 영상의 중심과 카메라 영상으로 포착된 목표물 중심 사이의 위치 에러를 이용하여 영상 장치의 목표 지향 벡터를 획득하였으며, 위치 에러를 획득하기 위하여 영상 처리 기법 중 하나인 CAMShift(Continuously Adaptive Mean Shift) 알고리즘을 적용하였다. 최종적으로, 목표 추적 알고리즘을 실험 모델에 적용해 봄으로써 실제 실험 환경에서의 목표 추적 알고리즘의 적용 타당성을 검증하였다.

• 한국전자통신학회논문지
• /
• 제17권5호
• /
• pp.933-940
• /
• 2022

2차원 영상 센서를 이용하여 조종자의 3차원 손 위치를 인식하고 이를 기반으로 원격으로 6축 로봇팔을 제어하는 시스템을 개발하였다. 시스템은 물체의 영상정보를 인식하는 2차원 영상 센서 모듈, 영상정보를 로봇팔 제어 명령어로 전환하는 알고리즘, 자체 제작한 6축 로봇팔 및 제어 시스템으로 구성된다. 영상 센서는 조종자가 착용한 장갑의 모양과 색을 인지하여 크기 및 위치정보를 출력하게 되며, 본 연구에서는 이러한 위치 및 물체를 둘러싼 크기 정보를 이용하여 로봇 선단의 속도를 제어한다. 연구 방법의 검증은 자체 제작된 6축 로봇으로 실행하였으며, 조종자의 손동작 조종에 의한 실험을 통해 제안한 영상정보 제어 및 로봇 선단 제어 방법이 성공적으로 동작함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.899-904
• /
• 2003

Microarrayer makes DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the development results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density microarray. The microarrayer is developed by using a robot of three-axes perpendicular type. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 32 tips at the same time. To prove the performance of the developed microarrayer, the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, it can be shown that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within 1 $cm^2$ area.

• Journal of Biosystems Engineering
• /
• 제30권3호
• /
• pp.179-184
• /
• 2005

The purpose of this study was the development of teat-cup attachment module for robot milking system. The teat-cups attachment module was controlled on the two dimensional space independently, Each teat cup of an end effector was independently controlled via two axis control based on the position information data obtained from the image processing system. This system was developed install of all 4 teat cups at the same time after adjusting positions of each teat sequentially. The individual motion system was operated using two servo motors for the high speed of teat position adjustment. The errors fur the individual motion system of teat cups were maximum 1.0mm, minimum 0.0mm, and average 0.6mm. The operating time for adjusting the teat cups position required about 1.0 second. It is envisaged that teat cups attachment module can be applicate to milking robot being developed in consideration of the experiment results for the teat cups operation accuracy and the actuation speed of servo motors.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1067-1071
• /
• 2013

A 3D visual sensing method using a laser structured beam is presented for robotic tracking applications in a simple and reliable manner. A cylindrical shaped laser structured beam is proposed to measure the pose and position of the target surface. When the proposed laser beam intersects on the surface along the target trajectory, an elliptic pattern is generated. Its ellipse parameters can be induced mathematically by the geometrical relationship of the sensor coordinate and target coordinate. The depth and orientation of the target surface are directly determined by the ellipse parameters. In particular, two discontinuous points on the ellipse pattern, induced by seam trajectory, indicate mathematically the 3D direction for robotic tracking. To investigate the performance of this method, experiments with a 6 axis robot system are conducted on two different types of seam trajectories. The results show that this method is very suitable for robot seam tracking applications due to its excellence in accuracy and efficiency.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제8권3호
• /
• pp.185-191
• /
• 2008

In this paper, experimental studies of a neural network (NN) control technique for non-model based position control of the x-y table robot are presented. Decentralized neural networks are used to control each axis of the x-y table robot separately. For an each neural network compensator, an inverse control technique is used. The neural network control technique called the reference compensation technique (RCT) is conceptually different from the existing neural controllers in that the NN controller compensates for uncertainties in the dynamical system by modifying desired trajectories. The back-propagation learning algorithm is developed in a real time DSP board for on-line learning. Practical real time position control experiments are conducted on the x-y table robot. Experimental results of using neural networks show more excellent position tracking than that of when PD controllers are used only.

• 한국인터넷방송통신학회논문지
• /
• 제8권3호
• /
• pp.71-79
• /
• 2008

본 논문에서는 평판 디스플레이용 유리의 평탄 도와 두께를 측정하기 위한 검사시스템을 구성한다. 유리 계측에 필요한 레이저센서와 로봇 암의 성능을 분석 및 해석한다. 3가지 레이저 센서를 사용하여 비교 분석하였고, 로봇암은 볼 스크루 타입을 사용하여 유리 계측 방법을 논하고, 문제점을 찾아내어 해결책을 제시한다. 유리의 평탄도와 두께 측정에 있어 스테이지와 로봇암에 의한 오차를 최소화하기 위해서 기구적 오차를 고려한 계측을 통해 성능을 개선한다.