• Title/Summary/Keyword: 3 second

Search Result 25,678, Processing Time 0.05 seconds

The effect of premolar extractions on tooth-size discrepancy in malocclusion patients (Original Article 1 - 부정교합과 차등적 소구치 발치가 치아 크기 부조화에 미치는 영향)

  • Kim, Hee-Hun;Sung, Sang-Jin;Moon, Yoon-Shik
    • The Journal of the Korean dental association
    • /
    • v.48 no.3
    • /
    • pp.196-204
    • /
    • 2010
  • To establish the ideal occlusal relationship, the values of tooth size and ratio must be in a normal range. In this study, the means and standard deviations of Bolton's anterior ratio and overall ratio using mesiodistal dimensions of teeth measured on diagnostic models of 334 Korean malocclusion patients were calculated and differences in Bolton ratio according to the groups of malocclusion patients were studied. Also the changes that can occur in overall ratio before and after hypothetical tooth extractions were observed. The results are as follows. 1. The mean anterior ratio of Korean malocclusion patients was $78.0\;{\pm}\;2.69%$, and the mean overall ratio was $91.56\;{\pm}\;2.28%$. 2. The largest value of tooth size ratio could be found in Class III group, followed by Class I and Class II groups in order. However there was no statically significant difference. 3. The values of overall ratio reduced significantly after premolar extractions in all malocclusion groups, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5). 4. The values of overall ratio reduced significantly after premolar extractions in all 3 groups divided based on Bolton ratio, which was much more significant in the extraction of upper second premolar and lower first premolar(U5L4) or upper second premolar and lower second premolar(U5L5).

C-shaped root canals of mandibular second molars in a Korean population: a CBCT analysis

  • Kim, Hee-Sun;Jung, Daun;Lee, Ho;Han, Yoon-Sic;Oh, Sohee;Sim, Hye-Young
    • Restorative Dentistry and Endodontics
    • /
    • v.43 no.4
    • /
    • pp.42.1-42.7
    • /
    • 2018
  • Objectives: The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population. Materials and Methods: A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible. Results: Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations. Conclusions: There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.

On Inflated Achievable Sum Rate of 3-User Low-Correlated SC NOMA

  • Chung, Kyuhyuk
    • International journal of advanced smart convergence
    • /
    • v.10 no.3
    • /
    • pp.1-9
    • /
    • 2021
  • In the Internet of Thing (IoT) framework, massive machine-type communications (MMTC) have required large spectral efficiency. For this, non-orthogonal multiple access (NOMA) has emerged as an efficient solution. Recently, a non-successive interference cancellation (SIC) NOMA scheme has been implemented without loss. This lossless NOMA without SIC is achieved via correlated superposition coding (SC), in contrast to conventional independent SC. However, conventional minimum high-correlated SC for only 2-user NOMA schemes was investigated in the lossless 2-user non-SIC NOMA implementation. Thus, this paper investigates a 3-user low-correlated SC scheme, especially for an inflated achievable sum rate, with a design of 3-user low-correlated SC. First, we design the 3-user low-correlated SC scheme by taking the minimum sum rate between 3-user SIC NOMA and 3-user non-SIC NOMA, both with correlated SC. Then, simulations demonstrate that the low correlation in the direction of the first user's power allocation inflates the sum rate in the same direction, compared to that of conventional minimum high-correlated SC NOMA, and such inflation due to low correlation is also observed similarly, in the direction of the second user's power allocation. Moreover, we also show that the two low correlations of the first and second users inflates doubly in the both directions of the first and second users' power allocations. As a result, the proposed 3-user low-correlated SC could be considered as a promising scheme, with the inflated sum rate in the future fifth-generation (5G) NOMA networks.

Survey on Notion of Department of Ophthalmic Optics Students (안경광학과 학생들의 의식조사)

  • Kim, Hye-Dong
    • Journal of Korean Ophthalmic Optics Society
    • /
    • v.13 no.3
    • /
    • pp.13-17
    • /
    • 2008
  • Purpose: The aim of the study is to provide for prospects of Department of Ophthalmic Optics. Methods: This study surveyed on notion in sunder of the frist grade 100 people, second grade 100 people, third grade 100 people in the third educational system of Department of Ophthalmic Optics. Results: 1. Recognition of beforehand information for Department of Ophthalmic Optic were investigated the highest rate at frist grade 40 people(40%) by ordinary, at second grade 42 people(42%) by ordinary and at third grade 34 people(34%) by low. 2. Goodness of fit of register for a course and content for Department of Ophthalmic Optic were investigated the highest rate at frist grade 54 people(54%) by ordinary, at second grade 51 people(51%) and at third grade 47 people(47%) by suitableness. 3. Satisfaction of choice for Department of Ophthalmic Optics were investigated the highest rate at frist grade 43 people(43%) by high, at second grade 45 people(45%) by ordinary and at third grade 41 people(41%) by high. 4. Consideration of instruction for Department of Ophthalmic Optic were investigated the highest rate at frist grade 55 people(55%), at second grade 60 people(60%) and at third grade 49 people (49%) by good. 5. Relationship of friend in Department of Ophthalmic Optics were investigated the highest rate at frist grade 40 people(40%), at second grade 50 people(50%) and at third grade 51 people(51%) by good. 6. Relationship a senior-younger men in Department of Ophthalmic Optics were investigated the highest rate at frist grade 47 people(47%), at second grade 50 people(50%) and at third grade 41 people(41%) by ordinary. 7. Prospects of future for Department Ophthalmic Optics were investigated the highest rate at frist grade 47 people (47%), at second grade 50 people(50%) and at third grade 45 people(45%) by ordinary. 8. Affairs after graduation of Department of Ophthalmic Optics were investigated the highest rate at frist grade 60 people(60%), at second grade 68 people(68%) and at third grade 66 people(66%) by optical shop. Conclusions: Satisfaction of choice for Department and Prospects of future for Department were investigated to be good as a whole.

  • PDF

Korean athlete's recognition of sports dentistry and condition of teeth wear (한국 운동선수의 스포츠 치의학에 대한 인지도 및 치아교모상태에 관한 연구)

  • Lee, Sung-Bok;Choi, Dae-Gyun;Han, Kwang-Heung
    • Journal of Dental Rehabilitation and Applied Science
    • /
    • v.18 no.4
    • /
    • pp.235-249
    • /
    • 2002
  • This study was accompolished to analyze and compare the number and area of the occlusal contact points in healthy volunteers and athletes with normal occlusion. Before the study, 89 athletes(sports career:8.6 years, average age 20) at Kyung Hee University were selected, and survey was accomplished for athlete's recognition about sports dentistry. For this study, 15 athletes(13 amles and 2 females with average age 20) and 21 healthy volunteers(14 mles and 7 females with average age 20.09) at Kyung Hee University were selected. The visual display acquired by scanning of occlusal record in maximal intercuspation was converted into 16 gray value image. Then, using computer program(J & Lee Occlusal Analyser), the pixel which was in definite range of the gray value was recognized, and the numbers of recognized pixel were calculated to area. The results were as follows : (1) On the survey about sports dentistry, 28% of 89 athletes didn't agree that human occlusion may be important, and 30% didn't have any idea of the influence of human occlusion during their sports activities. (2) The average numbers of total occlusal contact points were 31.05 in control group, and 34.67 in athlete group. The average area of total occlusal contacts was $100.25mm^2$ in control group, and $127.78mm^2$ in athlete group. (3) In control group, the average numbers of occlusal contact points were revealed in order as follows; the first molar(8.48), the second molar(8.24), the second premolar(4.71), the lateral incisor(2.90), the first premor(2.43), the central incisor(2.19), and the canine(2.1). The least average in canine(2.1) was similar to the average(2.19) in central incisor and (2.09) in lateral incisor. In athlete group, the average numbers of occlusal contact points were revealed in order as follows; the first molar(8.87), the second molar(8.47), the second premolar(5.60), the canine(3.80), the lateral incisor(3.33), the first premolar(2.67), and the central incisor(1.93). (4) In control group, the average areas of occlusal contact surface were revealed in order as follows; the first molar($39.47mm^3$), the second molar($37.54mm^3$), the second premolar($9.54mm^3$) the first premolar($6.18mm^3$), canine($3.49mm^3$), the central incisor($2.76mm^3$), and the lateral incisor($1.28mm^3$). In athlete group, the average areas of occlusal contact surface were revealed in order as follows; the first molar($44.11mm^3$), the second molar($40.69mm^3$), the second premolar($16.50mm^3$), the first premolar($9.39mm^3$), the canine($5.08mm^3$), the lateral incisor($3.7mm^3$), and the central incisor($2.25mm^3$). (5). With aging in both control and athlete group, there was a decreasing tendancy in average number of occlusal contact point, and was an increasing tendancy in average area of occlusal contact surface. In comparison at each age, both the numbers and area of occlusal contact were greater in athlete group than in control group. It was not significant in the numbers of occlusal contact points beween athlete and control group(p>0.1), but significant in the area of occlusal contact surface(p<0.05). (6) In comparision as to the kind of sports(Gymnastics:2, Rugby:3, Soccor:5, Ice hocky:5), the numbers of occlusal contact points were the most in ice hocky, and the area of occlusal contact surface was the greatest in gymnastics. With increasing a career in athlete group, there was a decreasing tendancy in average numbers of occlusal contact points, and was an increasing tendancy in average area of occlusal contact surface.

The Kinematic Analysis of Fouette A La Second in Cheerleading (치어리딩의 푸에떼 아라스공드 (Fouette A La Second) 동작의 운동학적 분석)

  • Yeon, Eun-Jung;Ryu, Jae-Kyun
    • Korean Journal of Applied Biomechanics
    • /
    • v.22 no.2
    • /
    • pp.173-181
    • /
    • 2012
  • The purpose of this study was to research on the movement of Fouette A La Second which was a type of turning movements on cheerleading. This research was conducted for helping cheerleaders to improve their overall skills. The three cheerleading national team members were participated in this research and the movements of Fouette A La Second were recorded with 6 digital motion master 60 video cameras, operating at a sampling frequency of 60 fields/sec. Six out of ten turning motion data were collected and analyzed with Kwon3D XP. The results were as follow: 1) The subject A's Releve motion was not executed precisely because of the COG's unstability. So she was required to improve the balancing ability. 2) The subject B could not execute the precise A La Second motion because of subject B's large hip angle. By tracing the projection of B's right toe on x-y plane, the subject made an elliptical orbit. Because B did not have a proper turning skills she needed to improve the muscle power and flexibility. She also needed to move quickly from Releve to Plie movement. 3) The subject C could not execute the Plie movement precisely, so she could not turn her body correctly around a certain spot. The subject C needed to decrease the knee angle at the Plie motion.

Optical Flow Estimation of Large Displacements from Real Sequential Images

  • Kim, Jin-Woo
    • Journal of information and communication convergence engineering
    • /
    • v.9 no.3
    • /
    • pp.319-324
    • /
    • 2011
  • In computing the optical flow. Horn and Schunck's method which is a representative algorithm is based on differentiation. But it is difficult to estimate the velocity for a large displacement by this algorithm. To cope with this problem multigrid method has been proposed. In this paper, we have proposed a scaled multigrid algorithm which the initial flow for a level is calculated by the summation of the optimally scaled flow and error flow. The optimally scaled flow is the scaled expanded flow of the previous level, which can generate an estimated second image having the least RMS error with respect to the original second image, and the error flow is the flow between the estimated second image (generated by the optimally scaled flow) and the original second image. The flow for this level is then estimated using the original first and second images and the initial flow for that level. From among the various coarsest starting levels of the multigrid algorithm, we select the one that finally gives the best estimated flow. Better results were achieved using our proposed method compared with Horn and Schunck's method and a conventional multigrid algorithm.

The Density Effect on the Dry Matter Production of Zea mays (옥수수의 건물질성산에 미치는 밀도효과)

  • 이일구
    • Journal of Plant Biology
    • /
    • v.13 no.1
    • /
    • pp.56-64
    • /
    • 1970
  • The present experiments differning from that conducted by agriculturists with the first consideration of food or seed production were performed in order to investigate the density effect on dry matter production in the artified population of maize. Three experimental plots were established and one seed was sown in the first plot, 2 seeds in the second plot and 3 seeds in the third plot, respectively. The space of each ridge was designed with 30cm in width and 50cm in length. The space of each seed was 4cm and the growth amount by density was measured through three times. The results obtained are as follows: 1) The total growth amount per unit area was in the order of the third, second and first plots until the second sampling. At the third sampling the whole plots showed almost the same growth amount except the first plot which showed a slightly smaller amount. 2) The growth amount per individual plant was in the order of the third, second and first plots until the second sampling, while the first plot showed drastic growth compared with the other two plots at the third sampling. 3) The growth amount by each organ(leaf, stem and root) of the plant body was markedly abundant in the stem of the non-productive part compared with that in the leaf of the productive part. Especially the root was affected remarkably by density and the first plot showed an abundant growth in comparison with the other plots which were too poor to resist the gound surface.

  • PDF

Influences of Doping Methods on Microstructure and Fracture Toughness of Mo-La Alloys

  • Wang, Lin;Sun, Yuanjun;Luo, Jianhai;Zhu, Yongan;Niu, Pingwen
    • Proceedings of the Korean Powder Metallurgy Institute Conference
    • /
    • 2006.09b
    • /
    • pp.1327-1328
    • /
    • 2006
  • Lanthanum oxide was introduced to molybdenum powder by liquid-liquid doping and liquid-solid doping respectively. Mo alloys were prepared by powder metallurgy technology. The size distribution and feature of dopant particles and the fractographs of Mo alloys were investigated by TEM and SEM respectively. The results indicated that liquid-liquid doping method is favorable for refining and dispersing $La_2O_3$ particles uniformly in matrix. Fracture toughness of Mo alloys prepared by liquid-liquid doping showed better results than that of liquid-solid doping. Furthermore, the influences of the size distribution of $La_2O_3$ on properties of Mo alloys was discussed by dislocation pile-up theory.

  • PDF

Preparation and Characterization of Paclitaxel-loaded PLGA Nanoparticles Coated with Cationic SM5-1 Single-chain Antibody

  • Kou, Geng;Gao, Jie;Wang, Hao;Chen, Huaiwen;Li, Bohua;Zhang, Dapeng;Wang, Shuhui;Hou, Sheng;Qian, Weizhu;Dai, Jianxin;Zhong, Yanqiang;Guo, Yajun
    • BMB Reports
    • /
    • v.40 no.5
    • /
    • pp.731-739
    • /
    • 2007
  • The purpose of this study was to develop paclitaxel-loaded poly(lactide-co-glycolide) (PLGA) nanoparticles coated with cationic SM5-1 single-chain antibody (scFv) containing a polylysine (SMFv-polylys). SM5-1 scFv (SMFv) is derived from SM5-1 monoclonal antibody, which binds to a 230 kDa membrane protein specifically expressed on melanoma, hepatocellular carcinoma and breast cancer cells. SMFv-polylys was expressed in Escherichia coli and purified by cation-exchange chromatography. Purified SMFv-polylys was fixed to paclitaxel-loaded PLGA nanoparticles to form paclitaxel-loaded PLGA nanoparticles coated with SMFv-polylys (Ptx-NP-S). Ptx-NP-S was shown to retain the specific antigen-binding affinity of SMFv-polylys to SM5-1 binding protein-positive Ch-hep-3 cells. Finally, the cytotoxicity of Ptx-NP-S was evaluated by a non-radioactive cell proliferation assay. It was demonstrated that Ptx-NP-S had significantly enhanced in vitro cytotoxicity against Ch-hep-3 cells as compared with non-targeted paclitaxel-loaded PLGA nanoparticles. In conclusion, our results suggest that cationic SMFv-polylys has been successfully generated and may be used as targeted ligand for preparing cancer-targeted nanoparticles.