• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.263-271
• /
• 2003

The purpose of the present study was to evaluate the patterns of hybrid layer according to the application time and the frequency and its effects on the shear bonding strength of All-In-One system in primary teeth. A single bonding agent(Scotchbond Multi-Purpose Plus, 3M) and an All-In-One system(Prompt L-pop, 3M ESPE) were applied on the dentin varying the application time and the frequency in primary teeth. Shear bond strength was measured and the patterns of hybrid layers were observed by SEM. The following results were obtained ; 1. The shear bonding strength of single bonding agent was significantly higher than that of All-In-One system(P<0.05). 2. The shear bonding strength of All-In-One system applied twice or 3 times were higher than that of applied once (P<0.05). And thickness of the hybrid layer was increased when applied twice or 3 times compared to once. 3. The shear bonding strength of All-In-One system when applied for 15 second and 30 second were higher than that of 7 second (P<0.05). And the hybrid layer thickness of 15 second and 30 second's application time were higher than that of 7 second. 4. Thickness of hybrid layer applied with single bonding agent was $2-4{\mu}m$ and that of All-In-One system was $1-2{\mu}m$.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.2
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• Journal of Environmental Science International
• /
• v.24 no.7
• /
• pp.865-874
• /
• 2015

This study was conducted to investigate the correlation between the distribution chart and input data of the predicted 3-second gust and damage cost, by using the forecast field and analysis field of Regional Data Assimilation Prediction System (RDAPS) as initial input data of Korea risk assessment model (RAM) developed in the preceding study. In this study the cases of typhoon Rusa which caused occurred great damage to the Korean peninsula was analyzed to assess the suitability of initial input data. As a result, this study has found out that the distribution chart from the forecast field and analysis field predicted from the point where the effect due to the typhoon began had similarity in both 3-second gust and damage cost with the course of time. As a result of examining the correlation, the 3-second gust had over 0.8, and it means that the forecast field and analysis field show similar results. This study has shown that utilizing the forecast field as initial input data of Korea RAM could suit the purpose of pre-disaster prevention.

• Phonetics and Speech Sciences
• /
• v.10 no.2
• /
• pp.69-76
• /
• 2018

The elderly are at increased risk of developing dysphagia due to aging and illnesses. The aim of the current study was to analyze, via an acoustic study, the change in the voice quality of normal elderly people after a 3oz water-swallow test. Subjects included a group of 60 normal elderly people (age: $mean{\pm}SD=76.9{\pm}6.66$) and 60 healthy young adults (age: $mean{\pm}SD=25.1{\pm}2.36$). Every participant produced a five-second /a/ phonation pre- and post-swallowing, and the fractioned two-second sections were analyzed using the MDVP (multi dimensional voice program) analysis. The elderly group demonstrated a post-swallowing increase in the following related acoustic parameters: fundamental frequency, fundamental frequency variation, amplitude-variation, and noise in both two-second sections. However, the younger group showed an increase only in frequency related acoustic parameters (i.e., STD ) in the first two-second section. The significant changes in values in the post-swallowing parameters might indicate temporary irregularities in pitch and amplitude along with higher amounts of noise in the voice. The results could be attributed to water residues in the vocal fold and vocal tract, as well as a deterioration of the motor and sensory functions caused by anatomical and physiological changes that result from aging.

• Carbon letters
• /
• v.9 no.3
• /
• pp.181-187
• /
• 2008

Batch sorption experiments were carried out for the removal of metylene blue from its aqueous solution using $H_3PO_4$ activated Acacia arabica carbon (AAC). The prepared activated carbon was characterized and was found as an effective adsorbent material. The operating variables studied were initial metylene blue concentration, AAC concentration and solution pH. AAC activated carbon posses a maximum sorption capacity for the range of initial dye concentrations studied (60~100 mg $L^{-1}$). The sorption kinetics were analyzed using reversible first order kinetics, second order, reversible first order, pseudo-first order, and pseudo-second order model. The sorption data tend to fit very well in pseudo-second order model for the entire sorption time. The average pseudo-second order rate constant, $K_{II}$ and regression coefficient value were determined to be 0.0174 mg $g^{-1}$ $min^{-1}$ and 0.9977. The biosorption process also fit well to reversible I order kinetics with a regression coefficient of 0.9878.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.12
• /
• pp.6385-6390
• /
• 2012

A number of studies have been conducted to explore the association of XRCC1 polymorphisms with thyroid cancer risk, but the results have been inconsistent. Thus we performed the present meta-analysis to clarify this issue based on all of the evidence available to date. Relevant studies were retrieved by searching PubMed and statistical analysis conducted using Stata software. Nine studies were included in this meta-analysis (1,620 cases and 3,557 controls). There were 6 studies (932 cases and 2,270 controls) of the Arg194Trp polymorphism, 7 studies (1432 cases and 3356 controls) of the Arg280His polymorphism and 9 studies (1,620 cases and 3,557 controls) for the Arg399Gln polymorphism. No association of XRCC1 Arg194Trp, Arg280His and Arg399Gln polymorphism with thyroid cancer risk was observed in the overall analysis. However, subgroup analysis revealed: 1) an elevated risk in aa vs AA analysis (OR=2.03, 95%CI= 1.24-3.31) and recessive genetic model analysis (OR=1.93, 95%CI= 1.20-3.08) in the larger sample size trials for XRCC1 Arg194Trp polymorphism; 2) a decreased thyroid cancer risk on subgroup analysis based on ethnicity in Aa vs AA analysis (OR=0.84, 95%CI= 0.72-0.98) and in a dominant genetic model (OR=0.84, 95%CI= 0.72-0.97) in Caucasian populations for the XRCC1 Arg399Gln polymorphism; 3) a decreased thyroid cancer risk on subgroup analysis based on design type in Aa vs AA analysis (OR=0.72, 95% CI= 0.54-0.97) among the PCC trials for the Arg399Gln polymorphism. Our results suggest that the XRCC1 Arg399Gln polymorphism may be associated with decreased thyroid cancer risk among Caucasians and XRCC1 Arg194Trp may be associated with a tendency for increased thyroid cancer risk in the two larger sample size trials.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.369-373
• /
• 2001

The congenital missing of mandibular second premolars is among the common dental anomaly in children. When a second premolar is diagnosed as congenitally missed, we should consider many factors influencing the treatment plan such as patient's age, states of roots of 2nd primary molar, degree of crowding, skeletal growth pattern, facial profile, procumbency of the incisor and lower facial height, etc. The mineralization of the second premolars begins in the majority of cases at the age of $2\sim2\frac{1}{2}$ years, but this period varies more widely than those for other permanent teeth. Also, mandibular second premolars show the greatest variations in differentiation and calcification. For this reason, aplasia of this group of teeth cannot be diagnosed at early age and with the same degree of certainty. From the clinical studies with 2 cases and some literature review on late development of second premolars, it could be summarized as follows : 1. The 2 cases showed marked delay in the development of mandibular second premolars. 2. After the crypt formation, the speed of calcification seemed nearly normal, suggesting that the delay was due to differentiation rather than calcification. 3. When one is encountered with similar conditions, it would be desirable to consider the possibility of delayed tooth development.

• Journal of applied mathematics & informatics
• /
• v.30 no.3_4
• /
• pp.541-553
• /
• 2012

In this paper, we study some limit properties of the harmonic mean of random transition probability for a second-order nonhomogeneous Markov chain on the generalized gambling system indexed by a tree by constructing a nonnegative martingale. As corollary, we obtain the property of the harmonic mean and the arithmetic mean of random transition probability for a second-order nonhomogeneous Markov chain indexed by a double root tree.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.117-123
• /
• 1979

The aspects examined in the present study concerning the location and position of the lower third molar and the interrelationships of this molar, the gonial angle, and the second lower molar in subjects aged 8-24 are based on measurements made from 472 orthopantomograms. The following conclusion were drawn on the basis of the present study. 1. The gonial angle decreased with age, but slight enlarging occurred in the age group 20-21. 2. The angulation of the third molar in relation to the second molar did not correlate with the size of the gonial angle but decreased with developmental stage. 3. The mesial angle between the longitudinal axis of the second molar and the mandibular base line correlated significantly with the gonial angle. The above angle were smaller in Class II, Divison 2 and larger in Class III than in Class I and Class II, Division 1. 4. The rate of presence of lower third molar was 74.4%.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.6 no.3
• /
• pp.239-246
• /
• 1982

The effect of the second phase morphology on the fracture ductility of dual phase steel was studied by means of tensile tests carried out room temperature. In this case the second phase morphology is characterized by two kinds; one is the MEF microstructure in which martensite encapsulated islands of ferrite, the other is the FEM microstructure in which ferrite encapsulated islands of martensite. The fracture ductility is improved by variation of the second phase morphology, but is essentially uneffected in the range of high strength ratio (4.7). Also the variation of ductility is well understood according to the difficulty of cleavage crack formation of the ferrite grain and to the brittleness of the martensitic structure.