• 제목/요약/키워드: 3 inch

검색결과 549건 처리시간 0.041초

은 나노유체의 미세관내 층류 유동의 압력강하 및 열전달계수에 관한 실험적 연구 (An Experimental Study on Pressure Drop and Heat Transfer Coefficient of Laminar Ag Nanofluid Flow in Mini-Tubes)

  • 권정태;남택훈;김태완;권영철
    • 한국산학기술학회논문지
    • /
    • 제10권12호
    • /
    • pp.3525-3532
    • /
    • 2009
  • 본 연구에서는 두 가지 종류의 미세관(외경 1/8inch, 3/16inch)을 사용하여 증류수 및 0.1vol.%, 0.3vol.%의 농도를 가지는 은 나노유체의 층류 유동 조건인 Re수 500~2,500의 범위에서 압력강하 및 나노유체의 열전달 계수를 실험적으로 구하였다. 압력강하의 경우 나노유체의 압력강하는 증류수에 비해 최대 21% 증가하였다. 대류열전달계수의 경우 나노유체 0.1vol%의 경우 증류수에 비해 1/8inch관에서는 약 3~42%, 3/16inch관에서는 약 3~69%의 향상이 있었다. 또한, 0.3vol%의 경우 1/8inch관에서는 약 35~65%, 3/16inch관에서는 약 62~125%의 향상이 있는 것을 알 수 있었다. 이상의 결과에서 은나노유체를 기계 및 전자 시스템의 냉각제로 사용할 경우 증류수에 비해 매우 우수한 냉각성능을 보일 것으로 판단된다.

『상한론』에서 산제의 방촌비와 전비, 환제의 오동자대 크기 수정치 (Revision Volume of Square-inch-spoon, Jeon-bi and Firmiana-Seed-sized Pill Preparations in 『Treatise on Cold Damage Diseases』)

  • 김인락
    • 대한본초학회지
    • /
    • 제37권5호
    • /
    • pp.75-81
    • /
    • 2022
  • Objectives : In 『Treatise on Cold Damage Diseases』, the volume of preparation dosage measured in Hap was 6.5mL. This study aimed to confirm that a square-inch-spoon, which measures powder preparation dosage, was 1/3 Hap, and that Jeon-bi was 1/8 square-inch-spoon. Based on these values, this study also aimed to adjust the diameter of Firmiana-Seed-sized pill preparation, currently known as 6.5mm, so that one square-inch-spoon of powder preparation creates 16 pills. Methods : Calculated the ratio between the floor areas of square-inch-spoon and Jeon-bi and measured the ratio of volume; assumed that powder preparations were stacked as much as possible in the shape of a square pyramid when scooped comfortably, then calculated the slopes of 1/3 Hap and 1/4 Hap; measured the volumes of powdered Oryeongsan and Lijungwhan in square-inch-spoon and Jeon-bi; created the powders into Firmiana-Seed-sized pill preparation; adjusted the diameter of Firmiana Seed so that 16 pills could be created. Results : Inferring from the floor areas, the volume of square-inch-spoon is 9.2 times that of Jeon-bi; one square-inch-spoon should be 1/3 Hap for the powder to reach its maximum slope of 47° and, according to actual measurement of powder preparations, reach its maximum volume; when created into Firmiana-Seed-sized pill preparations, one square-inch-spoon should be 1/3 Hap so that approximately 16 pills were created. Conclusions : One square-inch-spoon of powder preparation was 1/3 Hap(2.17mL), Jeon-bi was 1/8 square-inch-spoon(0.27mL), and the diameter of Firmiana-Seed-sized pill preparation was 5.5mm.

직경 3인치의 AlN 단결정 성장에 관한 연구 (A study on the growth of 3 inch grade AlN crystal)

  • 강승민
    • 한국결정성장학회지
    • /
    • 제29권3호
    • /
    • pp.140-142
    • /
    • 2019
  • 자외선 LED용 기판소재로 응용가능한 AlN(질화알루미늄) 단결정을 물리기상이동법(Physical Vapor Transport Method)으로 성장하기 위해 성장 거동을 조사하였다. 다결정의 종자결정을 사용하였으며, 직경은 3인치급이었고, 120시간 동안 성장공정을 수행하여 길이 약 4 mm의 다결정상을 얻었다. 본 연구에서는 성장 조건과 대형의 도가니를 사용하였을 경우의 성장 거동에 대하여 고찰하여 보고자 하였다.

LSI급 소자 제작을 위한 3인치 GaAs MBE 에피택셜 기판의 균일도 특성 연구 (A Study on Characteristics of Si doped 3 inch GaAs Epitaxial Layer Grown by MBE for LSI Application)

  • 이재진;이해권;맹성재;김보우;박형무;박신종
    • 전자공학회논문지A
    • /
    • 제31A권7호
    • /
    • pp.76-84
    • /
    • 1994
  • The characteristics of 3 inch wafer scale GaAs epitaxial wafer grown by molecular beam epitaxy for LSI process application were studied. The thickness and doping uniformity are characterized and discussed. The growth temperature and growth rate were $600^{\circ}C$ by pyrometer, and 1 $\mu$m/h, respectively. It was found that thickness and doping uniformity were 3.97% and 4.74% respectively across the full 3 inch diameter GaAs epitaxial layer. Also, ungated MESFETs have been fabricated and saturation current measurement showed 4.5% uniformity on 3 inch, epitaxial layer, but uniformity of threshold voltage increase up to 9.2% after recess process for MESFET device.

  • PDF

라이오셀방적사의 꼬임수에 따른 담요직물의 압축특성과 마모강도 (The Effect of Number of Twists of Lyocell Yarns on Compression Property and Abrasion Resistance Blanket Fabrics)

  • 송민규
    • 한국의류산업학회지
    • /
    • 제8권3호
    • /
    • pp.363-369
    • /
    • 2006
  • In this the study, Lyocell fabrics for blanket were developed to get high value added goods for elder and Infant. Therefore, the purpose of the study was determine the effect of twist per inch on the physical properties of developed fabrics, including compression property and abrasion resistance on the process for making Lyocell combined yarns. For comparison, commonly used cotton blanket was used. The results were as the follows: 1) Dimensional changes of Lyocell fabrics was in -3% which value was pretty stable, and antistatic property was very good with 10V of electric propensity voltage which means there was no static electricity at all. Pilling property of Lyocell fabrics showed 3 grade which was good and air permeability and moisture vapor transmission rate of Lyocell fabrics were higher than those of cotton fabric and keeping warmth rate of Lyocell fabrics was about 50% which means it very warms. 2) Twist per inch of Lyocell combined yarns increased with tensile strength and elongation of Lyocell fabrics. 3) Twist per inch of Lyocell combined yarns increased with decreasing thickness reduction rate and therefore, compression property of those was pretty good. Specially, compression property of Lyocell fabrics made with yarns of 3.9TPI was better than those of cotton fabric. 4) Twist per inch of Lyocell combined yarns increased with abrasion resistance of Lyocell fabrics.

악관절기능장애자의 방사선학적 연구 (A RADIOGRAPHIC STUDY ON TEMPOROMANDIBULAR JOINT TROUBLE)

  • 최병운
    • 치과방사선
    • /
    • 제9권1호
    • /
    • pp.13-18
    • /
    • 1979
  • The purpose of this study was to investigate the radiographic images of Temporomandibular joint trouble patients. This study included 186 patients with the chief complaints of TMJ pain and dysfunction. Their age ranged from 17 to 68 years. All patients were identified in the department of Dental mary of College of Dentistry, Seoul National University, Apr. 1978 to Jun. 1979. The author has observed the radiographic variations of two positions of condylar head taken by modified transcranial oblique-lateral projection, which are one in centric occlusion and the other in 1 inch(2.54㎝) mouth open. The results were obtained as follows; 1. In centric occlusion, the distances and positional relationship between the summit of condylar head and the deepest point of articular fossa revealed more or less large variations; Normal range is of 37.9%, anterior displacement of 37.3% and posterior displacement of 22.6%. 2. In the horizontal movement of condylar heads when on 1 inch mouth open, it was revealed that normalrange was of 46.5%, anterior displacement of 12.3%, posterior displacement of 41. 1 %. 3. In the positional interrelationship of both condylar heads when on 1 inch mouth open, it was revealed that symmetry(71. 5%) occurred approximately 2.5 times as many as asymmetry. 4. In both centric occlusion and 1 inch mouth open, it was showed that almost all estimated figures were greater in male than in female, and in the horizontal movement of condylar head when on 1 inch open, it was showed that hypermobility was dominant in male and hypomobility in female.

  • PDF

물 순환 및 에어레이션용 에어리프트 펌프의 성능 (Performance of Airlift Pumps for Water Circulation and Aeration)

  • 오세경
    • 한국수산과학회지
    • /
    • 제25권6호
    • /
    • pp.529-537
    • /
    • 1992
  • 본 실험은 에어리프트 펌프의 펌핑 성능과 에어레이션 능력을 조사하기 위해 수행했다. 펌프로는 2, 3, 4, 6인치 내경의 PVC 파이프를 사용했으며 펌프의 길이는 34.5인치였다. 공기 공급장치로는 정격 1 마력의 불로워를 사용하였다. 공기 유량 계측은 유량 게이지(풍속계)를 사용하였으며, 공기 압력은 물이 펌핑될 때 수위 변화로 측정했다. 펌프에 의한 에어레이션 성능 시험은 표준 에어례이션 테스트 방법으로 수행했다. 그 때 펌프출구의 중심선의 위치는 물 표면으로부터 3인치 위가 되도록 설정하였다. 수중의 산소농도는 에어레이션율을 산출하기 위하여 측정되었다. 탱크 속에서 수위 설정은 에어리프트 점프의 위치를 상하로 변경시켜 조절했다. 그 결과 수면에서 펌프의 위치가 높은 상태에서 물의 토출양은 공기의 공급량이 증가함에 따라 감소했다. 물 토출량의 감소율은 4인치와 6인치 펌프에서 높았으며, 직경이 작은 펌프에서 감소율은 그 정도가 미미했다. 시간의 변화에 따라 측정한 각 펌프의 에어레이션 성능은 2인치 펌프를 제외하고 3, 4, 6인치 펌프에서 비슷한 결과를 보았다. 6인치 펌프는 점핑 수두를 최소로 했을 때 가장 우수한 물 순환 효과를 얻을 수 있었다.

  • PDF

교정용 브라켓과 강선 사이의 운동마찰저항력에 관한 실험적 연구 (An experimental study of dynamic frictional resistance between orthodontic bracket and arch wire)

  • 이재환;이기수
    • 대한치과교정학회지
    • /
    • 제31권4호
    • /
    • pp.467-477
    • /
    • 2001
  • 이 연구의 목적은 호선으로 유도되는 치아이동을 실험실에서 실험하는 동안 브라켓과 선재의 운동 마찰저항에 대한 브라켓 수, 브라켓 폭경, 선재 크기가 미치는 영향을 관찰하기 위한 것이다. 상악 제 1, 2소구치, 제 1대구치와 유사한 크기의 레진 치아를 사용하였으며, 치주인대와 탄성계수가 비슷한 폴리 에테르 인상재를 사용하였다. 스테인레스 스틸 트윈 에지와이즈 브라켓으로 좁은 폭경 (2.4 mm), 중간 폭경 (3.0 mm), 넓은 폭경 (4.3 mm)을 사용하였으며, 강선으로는 0.016, 0.018, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$인치의 굵기를 사용하였고, 결찰은 합성고무링을 이용하고, 제1소구치에 부착된 좁은 폭경 브라켓 1개, 제 1, 2소구치에 부착된 2개의 중간 폭경 브라켓 및 제 1, 2소구치와 제 1대구치에 부착된 3개의 중간 폭경 브라켓과 각 강선 사이의 운동 마찰저항력을 계측하여 다음의 결론을 얻었다. 1. 좁은 폭경, 중간 폭경, 넓은 폭경 세 종류의 브라켓 모두에서 교정용 선재의 단면 크기가 증가할수록 마찰저항력도 증가하였다. 2. 0.016, 0.018인치 원형 강선은 브라켓 폭경이 증가하면 운동마찰저항력은 감소하며, $0.016\;{\times}\;0.022,\;0.019\;{\times}\;0.025$인치 각형 강선은 브라켓 폭경이 증가하면 운동마찰저항력이 증가하는 경향이 있었고0.016인치 원형 강선과 폭경이 다른 브라켓과의 운동마찰저항력 사이에는 통계적으로 유의차가 없었다. 3. 중간 폭경 브라켓의 수가 증가할수록 마찰저항력은 크게 나타났으며, 그 증가율은 브라켓의 수에 비례하였으나 정수배로 증가하지는 않았고 강선의 굵기에 따라 차이가 있었다.

  • PDF

Improvement of Color Temperature using Auxiliary Address Pulse Driving Scheme in 42-in. WVGA Plasma Display Panel

  • Park, Ki-Hyung;Lee, Eun-Cheol;Cho, Ki-Duck;Tae, Heung-Sik;Chien, Sung-Il
    • Journal of Information Display
    • /
    • 제6권1호
    • /
    • pp.22-27
    • /
    • 2005
  • Auxiliary address pulse driving scheme is proposed for controlling and improving the color temperature of the 42-inch WVGA ac-plasma display panel (ac-PDP) without sacrificing total luminance. Under a white-background, the color temperature of 42-inch ac-PDP is improved by about 1,700 K, whereas under a black-background, the color temperature of 42-inch ac-PDP is improved by about 3,200 K. In addition, by properly controlling the luminance in the R, G, and B cells, the color temperature of 42-inch ac-PDP can be raised from 5,827K to 10,705K.

플라즈마 디스플레이의 기술과 현황 (Current Status and Technology of Plasma Displays)

  • 강정원;김영섭
    • 반도체디스플레이기술학회지
    • /
    • 제3권4호
    • /
    • pp.1-4
    • /
    • 2004
  • 21세기에 접어들면서 Digital시험방송의 시작과 다양한 Contents의 유입으로 평판디스플레이 (Flat Panel Display)에 관한 관심과 수요가 증가하고 있다. 이 중 PDP는 90년대 후반부터 양산 및 개발을 시작하여 현재는 40 inch에서 60 inch 화면 크기의 제품을 시장에서 구입할 수 있으며, 03년도에는 80 inch 크기의 Proto-type Model을 공개한 바 있다. PDP는 40 inch 이상의 대면적 구현이 용이하다는 점, CRT와 동등 수준의 화상 구현이 가능하다는 점, 제조공법이 간단하고 제조원가가 저렴하다는 점 등을 특징으로 시장을 확대하고 있으나, 좀 더 대중적인 디스플레이가 되기 위해서는 고휘도 및 고효율화, 화질개선 그리고 저가격화 등과 같은 과제를 해결하여야 한다. 본 논문에서는 PDP의 개발역사 및 시장현황, 구조 및 구동 방법 그리고 해결과제 및 전망에 대해서 포괄적으로 살펴보기로 한다.

  • PDF