• Journal of Korean Ophthalmic Optics Society
• /
• v.15 no.3
• /
• pp.213-217
• /
• 2010

Purpose: To emphasize the necessity of post-fitting by follow-up test, the mis-alignment was analyzed after initial wearing of toric soft contact lenses (TSCL). Methods: After trial contact lenses were worn to 87 eyes with myopic astigmatism for 1 week, we observed the alignment of axis mark on trial contact lenses using slit lamp and corrected the rotated axis by method of LARS. After final fitting, rotation ratio, rotation degree and rotation position were analyzed compared to initial prescription divided to amount of cylinderical and spherical powers. Results: Rotation ratio of TSCL's axis was increased as increment of both cylinderical powers and (-)spherical powers. An average of rotation degree was $10^{\circ}{\sim}13^{\circ}$ which was not related to amount of their powers. Rotation position of TSCL's axis was more to temporal than to nasal. Conclusions: Because mis-alignment of axis after TSCL wearing induce the poor sight, adjustment of axial alignment as a result of follow-up must be performed.

• Journal of the Korean Magnetics Society
• /
• v.13 no.2
• /
• pp.70-75
• /
• 2003

Non-linear anisotropic materials were used to simulate the effects of bulk tensile stress in 3D finite element analysis (FEA). FEA was used to calculate the effects of near and far-side racetrack pit depth and simulated bulk tensile stress on magnetic flux leakage (MFL) signals. The axial and radial MFL signals were depended on near and far-side racetrack pit depth and on the bulk stress, but the circumferential MFL signal was not depended on them. The axial and radial MFL signals increased with greater pit depth and applied bulk stress, but the circumferential MFL signal was scarcely changed.

• 한국게임학회지
• /
• v.10 no.1
• /
• pp.12-23
• /
• 2013

본 논문에서는 컴퓨터 게임공간의 레벨디자인을 기반으로 3D 공간에서 설계될 수 있는 트랩 유형을 제시하였다. 트랩은 게임 내의 장애물로서 3D 공간에서의 X, Y, Z 축으로의 이동방향, 고정, 운동, 회전, 스케일의 트랩 자체의 상태, 일회성, 반복, 순환의 작동타입 등의 요소를 바탕으로 표현된다. 트랩의 상태를 기준으로 작동 타입과 이동방향의 경우의 수를 조합한 결과 28가지의 트랩 유형이 도출되었다. 그리고 도출해낸 28가지의 트랩 유형이 실질적으로 게임공간에 적용되어 쓰이고 있는지 알아보기 위해 발리언트와 트라인 게임을 대상으로 트랩 유형을 살펴보았다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1564-1572
• /
• 2010

In this study, the falls detection and direction classification system was implemented using 3-axial acceleration signal. The acceleration signals were acquired from the 3-axial accelerometer(MMA7260Q, Freescale, USA), and then transmitted to the computer through USB interface. The implemented system can detect falls using the newly proposed algorithm, and also classify the direction of falls using fuzzy classifier. The 6 subjects was selected for experiment and the accelerometer was attached on each subject's chest. Each subject walked in normal pace for 5 seconds, and then the fall down according to the four direction(front_fall, back_fall, left_fall and right_fall) during at least 2 second. The falls was easily detect using the newly proposed algorithm in this study. The acquired signals were analyzed after 1 second from generating falls. The fuzzy classifier was used to classify the direction of falls. The mean value of the falls detection rate was 94.79%. The classifier rate according to falls direction were 95.83% in case of front falls, 100% incase of back falls, 87.5% in case of left falls, and 95.83% in case of right falls.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.3
• /
• pp.113-119
• /
• 1984

In the scattering of a monochromatic plane wave from a dielectric column oscillating sinusoidally prependicular to its axis, one could assume that the boundary moves with a uniform velocity equal to its instantaneous oscilaating velocity. The scattered fields are abtained according to the postulates of special relativitiy and extended for the osdillating period. The angle distribution of average scattering radiation, the average of total scattering cross sections and radar cross sections for a period are illustrated as the function of the relative maximum oscillating velocity and the incident angles of plane waves.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.722_723
• /
• 2009

본 논문은 FEM(Finite elements Method)을 활용하여 가로축길이/외경지름 비가 약 2 정도로, 넓적한 평판형 전동기 해석을 할 때 고려해야 할 사항이다. 즉, 오차 발생 요인중의 하나인 축방향 누설을 고려한 해석 방법으로, 이를 위해 2차원해석과 3차원해석을 비교함은 기본이고, 일반적으로 사용하는 방법보다 효율적인 방법을 제안한다. 그후 일반화의 가능 여부와 다른 방안들을 고려하여 본다.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.129-135
• /
• 2000

Air-dynamic bearings are increasingly used in supporting small high-speed rotating bodies. This study investigates the effects of design parameters on the axial stiffness of spiral-grooved air bearings of various curvatures. Design parameters are fundamental clearance, groove depth, and bearing number. The pressure distribution at the clearance between the stator and rotor of the bearing is obtained by solving the Reynolds equation, and the supporting load and the axial linear stiffness are calculated from the pressure distribution. It is found that a larger curvature increases the axial linear stiffness more and that there exist an optimal groove depth for the linear stiffness of the air bearing. It is also found that the linear stiffness has a linear relationship with the bearing number.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.9
• /
• pp.437-442
• /
• 2006

Cogging torque, the primary ripple component in the torque generated by permanent magnet (PM) motors, is due to the slotting on the stator or rotor. This article shows the reduction of cogging torque in a novel axial flux permanent magnet (AFPM) motor through the various design schemes. 3D finite element method is used for the exact magnetic field analysis. The effects of slot shapes and skewing of slot on the cogging torque and the average torque have been investigated in detail.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.143-148
• /
• 2003

This paper provides two types of engineering J estimation equations for cylinders with finite internal axial surface cracks under internal pressure. The first type is the so-called GE/EPRI type J estimation equation based on Ramberg-Osgood materials. Based on detailed 3-D FE results the GE/EPRI-type J estimation equation along the crack front is proposed and validated for Ramberg-Osgood materials. For more general application, the developed GE/EPRI-type solutions are then re-formulated based on the reference stress concept. The proposed reference stress based J estimation equation has good agreement between the FE results and the proposed reference stress based J estimation provides confidence in the use of the proposed method for elastic-plastic fracture mechanics of pressurised piping

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.389-395
• /
• 1995

기존의 천이노심 DNBR 벌점 평가 방법을 개선하여 불확실도를 줄이고 신뢰도를 향상시키며, 적용범위를 확대함으로써 보다 실제적인 DNBR 벌점 평가 방법을 제시하고자 하였다. 이를 위하여 영광 1호기 JDFA-V5H 의 천이노심을 대상으로 하는 일련의 분석이 수행되었다. 먼저 균일노심과 천이노심을 모형화 한 기준 제어군에서의 상대적인 물성치의 변화와 축방향에서의 DNBR 거동을 분석하였고 이에 따른 최소 DNBR 의 상대적 차이로부터 최대 럴점 조건 및 벌점이 적용되는 집합체를 선정하였다. 변수 민감도 분석 결과, 최대 벌점 조건은 과출력 (120% 출력), 고압 (2420 psia) 그리고 상부노심에서 상대출력이 많은 축방향 출력 분포를 갖는 조건이 선정되었고 천이노심 벌점은 V5H에만 부과된다. 천이노심 DNBR 벌점은 배열 민감도 분석을 통하여 노심내 V5H 분율의 함수로 표현됨을 알 수 있었으며, 기존의 보수적인 방법론에 비해 최소 3% 이상의 천이노심 벌점이 감소되는것으로 나타나 추가적인 여유도의 확보로 인한 설계의 탄력성을 기대할 수 있다. 이 결과는 IFM이 존재하는 원전연료 집합체 상부에 대하여 노심의 V5H 분율이 0.02 부터 1.0 까지의 정상 및 과도상태 노심에 대하여 적용할 수 있다.