• Journal of Energy Engineering
• /
• v.10 no.2
• /
• pp.166-175
• /
• 2001

핀-관 열교환기의 효율을 증대시키기 위하여는 열저항을 결정하는데 있어서 중요한 역할을 하는 공기측 열전달 특성의 향상이 필요하다. 본 연구에서는 슬릿핀과 같은 핀 형상의 개선으로 인한 높은 압력손실을 감소시키기 위하여 타원관형 열교환기를 고려하였으며 이를 자체 개발한 3차원 비압축성 Navier-Stokes 코드를 이용하여 공기측 성능을 해석하였다. 이 코드는 시간항에 스칼라 내재적 근사분해법(scalar implicit approximate factorization)절차, 공간항에 유한체적법과 2차의 풍상차분법을 사용한다. 핀 형상이 평판핀인 타원관에 대하여 세장비가 0.3, 0.5, 0.75인 경우와 핀 형상이 슬릿핀이고 세장비가 0.5인 타원관에 대하여 공기측 유동을 해석하였으며 이를 원관의 성능과 비교하였다. 평판핀의 경우, 압력강하량은 원관과 비교하여 세장비가 작아질수록 감소하는 것을 볼 수 있었으며, 열전달 계수는 고려한 유입속도 범위에서 원관을 기준으로 약 5%이하의 변화로 거의 동일하게 유지되는 것을 볼 수 있었다. 슬릿핀의 경우 역시 문제되는 높은 압력강하량은 타원관을 도입함으로써 효과적으로 낮출 수 있음을 볼 수 있었다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1995.11a
• /
• pp.87-96
• /
• 1995

인공위성의 궤도진입에 사용되는 액체추진제 로켓엔진의 개발에서 분사기 설계를 적절히 수정, 보완 할 목적으로 수행된 핵심부품별 유동해석의 내용이 기술되었다. 단일 격자계를 구성하기 어려운 복잡한 형상의 분사기 유동장에 대한 격자계 구성을 용이하게 하고, 3차원의 점성 유동해석을 컴퓨터 기억 용량에 제한없이 수행하기 위한 다중블럭 격자기법이 사용되었다. 분사기의 내부유동은 3차원 비압축성 Navier-Stokes 방정식으로 pseudocompressibility 방법을 이용하여 수치모사되었다. 정상상태의 해는 근사 인자분해에 의한 ADI 기법으로 계산되고, 공간미분항에 대해 nonstaggered 격자계에서 2차 중앙차분을 사용하며 수치해의 안정성을 위해 인공점성항을 추가하였다. 난류계산을 위해 Baldwin- Lomax의 대수적 난류모델에 다수의 벽면효과를 고려하였다. 해석결과는 분사기의 성능에 영향을 미칠 수 있는 유동조건에 따라 분석되었다.

• The KIPS Transactions:PartB
• /
• v.10B no.4
• /
• pp.373-380
• /
• 2003

Most of low cost digital cameras reveal relatively high lens distortion. The purpose of this research is to compensate the degradation of image quality due to the geometrical distortion of a lens system. The proposed method consists of two stages : calculation of a lens distortion coefficient by a simplified version of Tsai´s camera calibration and subsequent image warping of the original distorted image to remove geometrical distortion based on the calculated lens distortion coefficient. In the lens distortion coefficient calculation stage, a practical method for handling scale factor ratio and image center is proposed, after which its feasibility is shown by measuring the performance of distortion correction using a quantitative image quality measure. On the other hand, in order to apply image warping via inverse spatial mapping using the result of the lens distortion coefficient calculation stage, a cubic polynomial derived from an adopted radial distortion lens model must be solved. In this paper, for the purpose of real-time operation, which is essential for embedding into an information device, an approximated solution to the cubic polynomial is proposed in the form of a solution to a quadratic equation. In the experiment, potential for real-time implementation and equivalence in performance as compared with that from cubic polynomial solution are shown.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.846-860
• /
• 2011

The binaural auditory system of human has ability to differentiate the direction and the distance of the sound sources by using the information which are inter-aural intensity difference(IID), inter-aural time difference(ITD) and/or the spectral shape difference(SSD). These information is generated from the acoustical transfer of a sound source to pinna, the outer ears. We can create a virtual sound system using the information which is called Head related transfer function(HRTF). However the performance of 3D sound is not always satisfactory because of non-individual characteristics of the HRTF. In this paper, we propose the algorithm that uses human's auditory characteristics for accurate perception. To achieve this, excitation energy of HRTF, global masking threshold and loudness are applied to the proposed algorithm. Informal listening test shows that the proposed method improves the sound localization characteristics much better than conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.702-711
• /
• 2011

In this paper, we derived a closed-form equation of a Best Linear Unbiased Estimator (BLUE) and its Crammer-Rao Lower Bound (CRLB) for the estimation of the position of the emitter based on the Time Difference of Arrival (TDOA) teclmique. The BLUE and CRLB were derived for the case of estimating 2 dimensional position of the emitter with 3 base stations or sensors, and for this purpose, we nsed an approximated equation of the TDOA hyperbola equation obtained from the first order Taylor-series after setting the reference points of the position. The derived equation can be used for any kind of noises which are uncorrelated in each other in the TOA measurement noises and for a white Gaussian noise also.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.82-87
• /
• 1987

In this study a method of shape optimization is applied to two dimensional heat transfer system. For this the optimization problem is defined in a functional form including cost, constraints and the system governing equation. Then the material derivative concept in continuum mechanics and the adjoint variable method are employed for the shape design sensitivity analysis. With the sensitivity analysis results, an optimum is sought with the gradient projection optimization algorithm. The two dimensional isoparametric finite elements are used for accurate analysis and sensitivity calculations. The above method is employed to find the boundary shape to achieve a desired temperature distribution along a segment of the boundary subject to the maximum area constraint.

• Journal of the Korean Chemical Society
• /
• v.63 no.2
• /
• pp.73-77
• /
• 2019

We compared methodologies based on the density functional theory (DFT), e.g., time-dependent DFT (TD-DFT), TD-DFT within Tamm-Dancoff approximation (TDA-DFT), and spin-unrestricted DFT (UDFT), that are usually employed to optimize the geometries of ${\pi}$-conjugated molecules in their lowest lying triplet excited ($T_1$) state. As a model system for ${\pi}$-conjugated molecules, we employed 1,2,3,4,5-pentacyano-6-phenyl-benzene. In conjunction with 6-31G(d) basis sets, we made use of gap-tuned range-separated ${\omega}B97X$ functional which is often employed recently in the calculations of molecular excited states. Near the equilibrium geometries, we found that the important difference between the geometries derived at UDFT level and those at TD-DFT or TDA-DFT methods: more stable ground-state energies but higher triplet excitation energies for UDFT derived geometries. In the studies, we discuss such differences in more detail.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.1006-1014
• /
• 2000

Hemisphere type Luneberg lens antenna with a reflector(frequency : 9.375 GHz, -3 dB beam width 6$^{\circ}$, diameter 30.3 cm(about 10 A), which is miniaturized and lightweightized by attaching a reflector on a section of half the Luneberg lens antenna, is designed and fabricated on the basis of Luneberg lens antenna from which easy beam pointing is acquired only by movement of 1st radiator. Measurement shows -3dB beamwidth is 6.1$^{\circ}$ in case of E-plane and 5.5$^{\circ}$ in case of H-plane. These are good agreements with expected value. Gain of this antenna is 26dBi(Aperture efficiency for uniform distribution : $\pi$ = 44.97%) which is greater than that of 1st radiator(Rectangular microstrip antenna) by 20.4 dB. And, after calculating the approximated pattern of the 1st radiator, far-field pattern, whose source is the second aperture source farmed from the approximated pattern of the 1st radiator is computed. Comparing this far-field pattern with the expected pattern, a (relatively) good agreement is observed. Circular polarization Luneberg lens antenna is also manufactured by making 1st radiator so that it has the characteristics of LHCP and RHCP radiation. The results are as followings : -3 dB beamwidth 5.8$^{\circ}$ , side lobe level -15.3 dB, isolation between LHCP and RHCP radiation 2543, axial ratio 2 dB bandwidth about 1.4 GHz(14.9%).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1891-1898
• /
• 2013

To efficiently execute 3D graphic APIs, such as OpenGL and Direct3D, special purpose arithmetic unit(SFU) which supports floating-point sine, cosine, reciprocal, inverse square root, base-two exponential, and logarithmic operations is designed. The SFU uses second order minimax approximation method and lookup table method to satisfy both error less than 2 ulp(unit in the last place) and high speed operation. The designed circuit has about 2.3-ns delay time under 65nm CMOS standard cell library and consists of about 23,300 gates. Due to its maximum performance of 400 MFLOPS and high accuracy, it can be efficiently applicable to mobile 3D graphics application.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.8 no.3
• /
• pp.246-255
• /
• 1996

A mild slope equation of parabolic type is derived with the revision of the 2nd order differential term and a new approach for the application to large area is presented. The replacement with long waves can overcome the numerical difficulty due to small waves over the system of large grid sizes. No matter how long the replaced wave length is, the refraction and shoaling are maintained by toeing its own wave speed and group velocity, respectively. However, the diffraction effect is modified by means of Eikonal equation. The developed numerical model was applied to the shoal of Ito and Tanimoto (1972) to yield the satisfactory results.