• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.3
• /
• pp.14-26
• /
• 2018

The Biotope Area Ratio (BAR) is a quantitative pre-planning index for sustainable development and an integrated indicator for the balanced development of buildings and outdoor spaces. However, it has been pointed out that there are problems in operations management: errors in area calculation, insufficiency in the underground soil condition and depth, reduction in biotope area after construction, and functional failure as a pre-planning index. To address these problems, this study proposes implementing LIM. Since the weights of the BAR are mainly decided by the underground soil condition and depth with land cover types, the study focused on the terrain and pavements. The model should conform to BIM guidelines and standards provided by government agencies and professional organizations. Thus, the scope and Level Of Detail (LOD) of the model were defined, and the method to build a model with BIM software was developed. An apartment complex on sloping ground was selected as a case study, a 3D terrain modeled, paving libraries created with property information on the BAR, and a LIM model completed for the site. Then the BAR was calculated and construction documents were created with the BAR table and pavement details. As results of the study, it was found that the application of the criteria on the BAR and calculation became accurate, and the efficiency of design tasks was improved by LIM. It also enabled the performance of evidence-based design on the terrain and underground structures. To adopt LIM, it is necessary to create and distribute LIM library manuals or templates, and build library content that comply with KBIMS standards. The government policy must also have practitioners submit BIM models in the certification system. Since it is expected that the criteria on planting types in the BAR will be expanded, further research is needed to build and utilize the information model for planting materials.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.218-218
• /
• 2011

낙동강은 4대강 살리기 사업에 의해 8개의 보(상주보, 낙단보, 칠곡보, 강정보, 달성보, 합천보, 함안보)가 하천 내에 건설되고 약 4억톤의 준설이 실시되면서 지형적으로 막대한 변화를 맞이하게 된다. 낙동강은 상류의 안동댐 및 임하댐에서 방류수, 중류의 구미 및 대구 등의 오염원 그리고 하류의 남강에 의한 영향 및 낙동강 하구언에 의한 정체에 의한 영향으로 지역적으로 수질 및 수리 특성이 서로 다르게 나타나고 있다. 낙동강에 건설되는 수중보들 또한 이러한 유입 및 경계 조건에 따라 서로 다른 수질특성을 나타낼 것으로 판단되며 이에 대한 영향을 미리 예측하고 발생 가능한 악영향에 대한 대안을 수립하는 것이 중요하다고 본다. 본 연구에서는 낙동강의 4대강 사업에 의한 지점별 및 시기적 영향을 정확하게 분석하기 위해 3차원 수리동역학 모델 EFDC와 수질모델 WASP을 연계하여 사용하였다. 연구대상지역은 안동댐 방류지점에서 낙동강 하구역까지의 총 334km의 지역을 포함하였으며 하천의 폭 방향, 수심방향 및 흐름방향에 대하여 3차원으로 격자를 구성하여 하천을 표현하였다. 수리 및 수질 보정에 필요 한 입력자료는 국토해양부 및 환경부 등에서 발표 된 자료를 이용하였으며 2007년을 기준으로 모의를 실시하였다. 4대강 살리기 사업에 의한 8개의 보 건설 및 낙동강 전역의 준설의 영향을 예측하여 사업 전 및 사업 후로 각각 구분하여 비교하였으며 사업 후 체류시간의 증가와 준설로 인한 수심증가에 따른 복합적인 원인에 의해 수질에 영향이 미치는 것으로 나타났다. 사업 후 낙동강의 각 수중보 출구 부근 지점에서 예측된 수질 특성은 사업전에 비하여 $BOD_5$는 전반적으로 감소하나, TN 및 TP 는 유사한 특성을 나타내었다. 그러나 Chl-a 농도는 상류와 중류에서는 체류시간의 증가로 증가하는 경향을 나타내었으며 이는 수질이 양호한 상류 지역에서 특히 큰 차이를 나타내는 경향으로 분석되었다. 그러나 낙동강 하구언 지역은 Chl-a 농도가 사업에 의해 약간 감소되는 경향을 나타내어 여타 구간과 다른 경향을 나타내었다. 이는 낙동강 하류의 Chl-a 농도가 이미 매우 높은 상태에서 체류시간에 의한 성장 촉진 보다는 수심증가로 인한 광량제한 효과가 더욱 지배적으로 나타난 것에 의한 영향으로 추정된다.

• Journal of Radiation Protection and Research
• /
• v.29 no.3
• /
• pp.205-212
• /
• 2004

Three-dimensional wind field and atmospheric dispersion models have been developed for estimating the concentration distributions of radioactive materials released into atmosphere. The field tracer experiment near the Kori nuclear power plant located over complex terrain was carried out for validating the atmospheric dispersion model. The wind fields were one of the most important factors for calculating the concentration. Therefore several numerical simulations using the measured wind data were performed to get more accurate concentration distributions compared with the analyzed values of the tracer gas. The calculated concentration distributions agreed well in the case of the usage of the more measured wind data in wind field model.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.2
• /
• pp.101-107
• /
• 2003

Lately, much researches for information management of web GIS base are gone. Specially, disaster Information Management System development of Web-Based for management and offer of disaster information such as flood or earthquake is necessarily necessary for prevention and countermeasure about disaster, disaster information acquisition of interest area. Spatial DB access for plan/analysis/management business of this system should be possible and must become display of disaster information and disaster mapmaking through internet for disaster prevention but research of web GIS base about this field is childhood yet. This research executed research for disaster information offer using HTML and Javascript and ESRI's ArcIMS that is development tools or web GIS. And this research could search disaster information of interest area through various kinds function and offer in display through user selection. Also, topography of interest area could confirm through third dimension topography model who use VRML. And this research could supply disaster information of Chunchon city using various function thorough system of Web-Based.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.3
• /
• pp.245-251
• /
• 2004

Recently, in a field of cadastre, a computerization of cadastral map is in progress with great growth of GSIS field. Also, the needs fer the integration of land and building information are widely increasing for integral-management and its application of various land related information. Through a revision of cadastral laws to replace the existing 2D-Cadastre with the 3D-Cadastre, a legal basis to register the position of buildings and facilities is prepared in the governmental or civil fields. This paper presented 3D-Cadastre theory that has been studied on Europe and surveyed building position directly with Totalstation at cadastral control point after choosing pilot test area, Also, the most efficient surveying method of registering building in a cadastral map is presented with comparing and analyzing building position after surveying digital orthophoto and digital map. And it is constructed a 3D information cadastral map model that can make the integral management of land, building, connecting land recorders, building management ledgers, building titles, building pictures, and related attribute information.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1136-1140
• /
• 2020

As air pollution caused by fine dust becomes serious, interest in the spread of fine dust and prediction of air quality is increasing. The causes of fine dust are very diverse, and some fine dust naturally occurs through forest fires and yellow dust, but most of them are known to be caused by air pollutants from burning fossil fuels such as petroleum and coal or from automobile exhaust gas. In this paper, the CALPUFF model recommended by the US EPA is used, and CALPUFF diffusion modeling is performed by generating a wind field through the CALMET model as a meteorological preprocessing program that generates a three-dimensional wind field, which is a meteorological element required by CALPUFF. Through this, we propose a fine dust diffusion modeling and air quality prediction system that reflects complex topography.

• Tunnel and Underground Space
• /
• v.25 no.5
• /
• pp.462-469
• /
• 2015

This study carried out a topographic survey at a small-scale open-pit limestone mine in Korea (the Daesung MDI Seoggyo office) using a popular rotary-wing unmanned aerial vehicle (UAV, Drone, DJI Phantom2 Vision+). 89 sheets of aerial photos could be obtained as a result of performing an automatic flight for 30 minutes under conditions of 100m altitude and 3m/s speed. A total of 34 million cloud points with X, Y, Z-coordinates was extracted from the aerial photos after data processing for correction and matching, then an orthomosaic image and digital surface model with 5m grid spacing could be generated. A comparison of the X, Y, Z-coordinates of 5 ground control points measured by differential global positioning system and those determined by UAV photogrammetry revealed that the root mean squared errors of X, Y, Z-coordinates were around 10cm. Therefore, it is expected that the popular rotary-wing UAV photogrammetry can be effectively utilized in small-scale open-pit mines as a technology that is able to replace or supplement existing topographic surveying equipments.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.431-446
• /
• 2007

Groundwater flow in a basin is greatly affected by many hydrogeological and hydrological characteristics of the basin. A groundwater flow model for the Kap-cheon basin ($area=648.3km^2$) in the Geum river basin was established using MODFLOW by fully considering major features obtained from observed data of 438 wells and 24 streams. Furthermore, spatial groundwater recharge distribution was estimated employing accurately calibrated watershed model developed using SWAT, a physically semi-distributed hydrological model. Model calibration using observed groundwater head data at 86 observation wells yielded the deterministic coefficient of 0.99 and the water budget discrepancy of 0.57%, indicating that the model well represented the regional groundwater flow in the Kap-cheon basin. Model simulation results showed that groundwater flow in the basin was strongly influenced by such factors as topological features, aquifer characteristics and streams. The streams in mountainous areas were found to alternate gaining and losing steams, while the streams in the vicinity of the mid-stream and down-stream, especially near the junction of Kap-cheon and Yudeong-cheon, areas were mostly appeared as gaining streams. Analysis of water budget showed that streams in mountainous areas except for the mid-stream and up-stream of Yudeong-cheon were mostly fed by groundwater recharge while the streams in the mid and down-stream areas were supplied from groundwater inflows from adjacent sub-basins. Hence, it was concluded that the interactions between surface water-groundwater in the Kap-cheon basin would be strongly inter-connected with not only streams but also groundwater flow system itself.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.3
• /
• pp.157-170
• /
• 2002

To examine the structure and distribution of the Keum River plume produced by continuous river discharge we carried out three-dimensional numerical model experiments with or without Coriolis force and tide. When Coriolis force is included but tide is not the model plume forms the clockwise circulation north of southern channel in the developing stage. As the plume expansion progresses the center of circulation moves to the southwest, with fuming the discharging axis of low-salinity water to the southwest from the mouth of southern channel. These results are explained mainly in terms of barotropic geostrophy by surface slope maintained with accumulated low-salinity(buoyant) water in front of the estuary mouth due to of offshore strong salinity front. When the M$_2$ tide is included the model plume extends farther to the northwest, forming large tongue-like salinity distribution. The tidally averaged surface flows of the offshore plume are mainly in geostrophic balance. These changes in plume distribution are explained in terms of low-salinity water advection by tidal excursion and active tidal mixing; the former supplies low salinity water to the north off the estuary mouth and the later increases mean sea level along the plume and surface salinity in northern shallow coastal area. The main features of observed Keum River plume(Lee et al., 1999; Choi et al., 1999), which showed the northwestward deflection of the plume axis and northward deepening of the plume thickness from the estuary mouth region, are well reproduced by the model in which tide is included.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.12
• /
• pp.1110-1116
• /
• 2013

A 3D-ray tracing tool is a software considering reflection, penetration, and diffraction of the signals to provide accuracy. To provide communication resources effectively, communication standards adopt Heterogeneous Networks (HetNets) that includes small cells. A 3D performance evaluation methodology becomes more and more important since the coverage of the small cell networks is narrower than that of the macro cell networks. It is difficult to directly apply conventional 2D mathematical models due to the complexity of small cell network; since they have many considerations such as topography, placement of buildings and 3D beamforming techniques. In this paper, we introduce an effective performance evaluation methodology for small cell networks using 3D-ray tracing tool. From simulation results, we conclude that new performance evaluation methodologies by using 3D-ray tracing tool is more suitable than conventional methodology for small cell networks.