• Tunnel and Underground Space
• /
• v.27 no.4
• /
• pp.185-194
• /
• 2017

This technical paper is a study on the unique displacements of Shotcrete Lining at the mined tunnel during excavation period through deep consideration with real time data from monitoring instrumentations correlation with the numerical analysis to identify the rock stresses and the rock spring points at the working face of the Conventional tunnelling by the Drill and Blast, based on the geological face mapping results of the project NS2, Transmission cable tunnel project in Singapore. The created geometry of numerical model was prepared to the real mined tunnel construction site including, vertical shaft, construction adit, tunnel junction area, and 2 enlargement caverns. The convergence measurements by the monitoring instrumentation were performed during the tunnel excavation and shaft sinking construction stages to guarantee the safety of complicated underground structures.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.209-212
• /
• 2011

본 논문에서는 평판(plate) 형태를 갖는 부유식 해상구조물의 유탄성해석에 관한 연구를 수행하였다. 유체력 산정을 위해 포텐셜을 입사, 방사, 산란으로 구분하여 계산하였던 기존의 방법 대신 전체 포텐셜을 직접 계산하는 방법을 사용하여 최근의 경향을 반영하였다. 선형 유탄성해석의 특성을 고려하여 해석시간을 감소시키기 위해 일반적으로 사용되고 있는 주파수 영역에서의 해석 기법을 적용하였다. 구조체의 모델링에 소요되는 요소수를 줄이고, 휨 변형 시 전단변형률에 의한 잠김현상을 해소하기 위해 MITC 기법을 적용한 평판 유한요소를 사용하였으며, 3차원 Green 함수법을 적용해 유체력을 산정하였다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.57-74
• /
• 2013

In this study, the virtual fixed point analysis and 3D full-modeling analysis for pile bent structures are conducted by considering various influencing factors and the applicability of the virtual fixed point theory is discussed. Also, a discrete analysis calculating separately both the superstructure and substructure of pile bent structures is performed on the basis of an equivalent base spring model by taking into account the major influencing parameters such as soil conditions, combined loading and pile diameter. The results show that the settlement and lateral deflection of the virtual fixed point theory are smaller than those of 3D full-modeling analysis. On the other hand, the virtual fixed point analysis overestimates the axial force and bending moment compared with 3D full-modeling analysis. It is shown that the virtual fixed point analysis cannot adequately predict the real behavior of pile bent structures. It is also found that discrete analysis gives similar results of lateral deflection and bending moment to those of unified analysis. Based on this study, it is found that discrete analysis considering column-pile interaction conditions is capable of predicting reasonably well the behavior of pile bent structures. It can be effectively used to perform a more economical design of pile bent structures.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.10
• /
• pp.55-62
• /
• 2012

In this research, the algorithm for simulating specific grain size distribution(GSD) with large diameter granular material was developed using the distinct element analysis program $PFC^{3D}$(Particle Flow Code). This modeling approach can generate the initial distinct elements without clump logic or cluster logic and prevent distinct element from escaping through the confining walls during the process. Finally the proposed distinct element model is used to simulate large triaxial compression test of the rockfill material and we compared the simulation output with lab test results. Simulation results of Assembly showed very well agreement with the GSD of the test sample and numerical modeling of granular material would be possible for various stress conditions using this application through the calibration.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2011

This study investigates the performance of composite (steel-concrete) frame structures through numerical experiments on individual connections. The innovative aspects of this research are in the use of connections between steel beams and concrete-filled tube (CFT)columns that utilize a combination of low-carbon steel and shape memory alloy (SMA) components. In these new connections, the intent is to utilize the recentering provided by super-elastic shape memory alloy tension bars to reduce building damage and residual drift after a major earthquake. The low-carbon steel components provide excellent energy dissipation. The analysis and design of these structures is complicated because the connections cannot be modeled as being simply pins or full fixity ones they are partial restraint (PR). A refined finite element (FE) model with sophisticated three dimensional (3D) solid elements was developed to conduct numerical experiments on PR-CFT joints to obtain the global behavior of the connection. Based on behavioral information obtained from these FE tests, simplified connection models were formulated by using joint elements with spring components. The behavior of entire frames under cyclic loads was conducted and compared with the monotonic behavior obtained from the 3D FE simulations. Good agreement was found between the simple and sophisticated models, verifying the robustness of the approach.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.177-189
• /
• 2012

Evaluation of three-dimensional ore body modeling has been performed by applying the geostatistical integration technique to multiple geophysical (electrical resistivity, MT) and geological (borehole data, physical properties of core) information. It was available to analyze the resistivity range in borehole and other area through multiple geophysical data. A correlation between resistivity and density from physical properties test of core was also analyzed. In the case study results, the resistivity value of ore body is decreased contrast to increase of the density, which seems to be related to a reason that the ore body (magnetite) includes heavy conductive component (Fe) in itself. Based on the lab test of physical properties in iron mine region, various geophysical, geological and borehole data were used to provide ore body modeling, that is electrical resistivity, MT, physical properties data, borehole data and grade data obtained from borehole data. Of the various geostatistical techniques for the integrated data analysis, in this study, the SGS (sequential Gaussian simulation) method was applied to describe the varying non-homogeneity depending on region through the realization that maintains the mean and variance. With the geostatistical simulation results of geophysical, geological and grade data, the location of residual ore body and ore body which is previously reported was confirmed. In addition, another highly probable region of iron ore bodies was estimated deeper depth in study area through integrated modeling.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.165-178
• /
• 2000

The simplified model for 3-dimensional analysis of vehicle-bridge interactions is presented in this study. By using the analysis model which includes the eccentricity of axle loads and the effect of the torsional forces acting on the bridge, the more accurate analysis results of the behavior of the bridge can be obtained. The equations of kinetic energy, potential energy and damping energy are expressed by degrees of freedom of the vehicle and the bridge. And then by applying Lagrange's equations of motion, the equations of motion of the vehicle and the bridge are obtained. By deriving the equations of forces acting on the bridge considering the vehicle-bridge vertical interactions and also by identifying the position of vehicle as time goes by, mass matrix, stiffness matrix, damping matrix and load vector of vehicle-bridge system are constructed in accordance with the position of vehicles. Then using Newmark's β-method(average acceleration), the equations of motion for the total vehicle bridge system are solved.

• Geophysics and Geophysical Exploration
• /
• v.12 no.4
• /
• pp.361-366
• /
• 2009

Layered-earth Green's functions in electormagnetic (EM) surveys play a key role in modeling the response of exploration targets. They are computed through the Hankel transforms of analytic kernels. Computational precision depends upon the choice of algebraically equivalent forms by which these kemels are expressed. Since three-dimensional (3D) modeling can require a huge number of Green's function evaluations, total computational time can be influenced by computational time for the Hankel transform evaluations. Linear digital filters have proven to be a fast and accurate method of computing these Hankel transforms. In EM modeling for 3D inversion, electric fields are generally evaluated by the secondary field formulation to avoid the singularity problem. In this study, three components of electric fields for five different sources on the surface of homogeneous half-space were derived as primary field solutions. Moreover, reflection coefficients in TE and TM modes were produced to calculate EM responses accurately for a two-layered model having a sea layer. Accurate primary fields should substantially improve accuracy and decrease computation times for Green's function-based problems like MT problems and marine EM surveys.

• Economic and Environmental Geology
• /
• v.36 no.4
• /
• pp.305-312
• /
• 2003

This study was performed to delineate the subsurface geology, geologic structure, and distribution pattern of the Palgongsan granitic body, and to reveal the relationship between the Kyeongsang basin and Yongnam massif by gravity survey. The study area is located between the latitude of 35$^{\circ}$45'-36$^{\circ}$21'N and longitude of 128$^{\circ}$15'-129$^{\circ}$00'E. Total of 966 gravity data measured by Seoul National University, KlGAM(Korea Institute of Geology, Mining ＆ Materials), Pusan National University and Yonsei University were used. The Bouguer gravity anomaly in the study area ranges from -12.88 to 26.01 mgal with a mean value of 11.27 mgal. A very low anomaly zone is located in the Yongnam massif in west of the study area. The anomaly value increases going from west to east. A low anomaly distribution in Palgongsan granite and Yongnam massif is interpreted as the effect of their lower density than that of Kyeongsang Super Group. Power spectrum analysis is applied to evaluate the average depth of basement the Kyeongsang Basin and Conrad discontinuity from gravity anomaly. The average depths of density discontinuities are calculated 10.45 km and 4.9 km, and these are interpreted as Conrad discontinuity and depth of basement of the Kyeongsang Basin, respectively. The depth of Palgongsan granite is derived by means of 2-dimensional modeling and it decreases gradually toward the east. The gravity anomaly east of the study area decreases abruptly due to Shingryeong fault and Nogosan ring fault. Two deepest and sharp roots of Palgongsan granite are recognized by 2-dimensional modeling of each profiles. The depths of those roots are 5.3 km on a profile AA' and 7 km on a profile BB' which is the maximum depth of Palgongsan granite. Small granitic bodies are also seen to be intruded around the Palgongsan granite. The root of Palgongsan granite is shown by 3-dimensional analysis based on the interpolation of 2-dimensional modeling along each profiles to exist in the southwest vicinity of Palgongsan granite. The total volume of Palgongsan granite is approximately 31.211 $Km^3$.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.5
• /
• pp.85-92
• /
• 2011

The dynamic behavior of piles becomes very complex due to soil-pile dynamic interaction, soil non-linearity, resonance phenomena of soil-pile system and so on. Therefore, the proper numerical simulation of the pile behavior needs much effort and calculation time. In this research, a new modeling method, which can be applied to the conventional finite difference analysis program FLAC 3D, was developed to reduce the calculation time. The soil domain in this method is divided into a near-field region and a far-field region, which is not influenced by the soil-pile dynamic interaction. Then, the ground motion of the far-field is applied to the boundaries of the near-field instead of modeling the far-field region as finite meshes. In addition, the soil non-linearity behavior is modeled by using the hysteretic damping model, which determines the soil tangent modulus as a function of shear strain and the interface element was applied to simulate the separation and slip between the soil and pile. The proposed method reduced the calculation time by as much as one third compared with a usual modeling method and maintained the accuracy of the calculated results. The calculated results by the proposed method showed a good agreement with the prototype pile behavior, which was obtained by applying a similitude law to the 1-g shaking table test results.