• Spatial Information Research
• /
• v.22 no.1
• /
• pp.1-7
• /
• 2014

In this paper, we suggested plan that utilize the mobile mapping system data for constructing 3D cadastral information of roads and buildings effectively. 3D cadastral information means conflation of existing cadastral information and spatial information. It also means 3D land management that can register and manage various spatial information with land information effectively. Technically, geometry information and attribute information by image or radar scanner and location information of geographic features calculated by GPS/INS integration technology are useful for constructing 3D cadastral information included in buildings and features on the ground. As a result, the application of mobile mapping system for constructing 3D cadastral information will make a scientification and enhancing of the land information.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2023.11a
• /
• pp.611-614
• /
• 2023

갈비뼈 병변 진단 과정은 방사선 전문의가 CT 스캐너를 통해 생성된 2 차원 CT 이미지들을 해석하며 진행된다. 병변의 위치를 파악하고 정확한 진단을 내리기 위해 수백장의 2차원 CT 이미지들이 세밀하게 검토되며 갈비뼈를 분류한다. 본 연구는 이런 노동 집약적 작업의 문제점을 개선시키기 위해 Biaxial Rib Segmentation(BARS)을 제안한다. BARS 는 흉부 CT 볼륨의 관상면과 수평면으로 구성된 2 차원 이미지들을 U-Net 모델에 학습한다. 모델이 산출한 세그멘테이션 마스크들의 조합은 서로 다른 평면의 공간 정보를 보완하며 3 차원 갈비뼈 볼륨을 재건한다. BARS 의 성능은 DSC, Recall, Precision 지표를 사용해 평가하며, DSC 90.29%, Recall 89.74%, Precision 90.72%를 보인다. 향후에는 이를 기반으로 순차적 갈비뼈 레이블링 연구를 진행할 계획이다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.24 no.4
• /
• pp.39-48
• /
• 2016

An information management system for a solid waste landfill site was developed, in this study, to optimize the operation and management of solid waste landfill in real time in addition to provide the information of landfill status to the landfill operator, public official concerned and local residents. The landfill information management system is composed of two systems (Solid waste landfill history management system and landfill operation and performance management system). The solid waste landfill history management system based on automated RFID/LPR system allows landfill operators to provide information of waste collection vehicles and received waste. In addition, the system aids in the identification of 3-dimensional (3D) position for landfilled solid wastes. Using the landfill operation and performance management system based on 3D laser scanner delivers information about landfill volume, settlement, landfill density, and current landfill capacity to landfill operators in real time, resulting in optimum space utilization. Ultimately, this system would dramatically reduce exposure of landfill operators to hazardous materials and improve the productivity of landfill operations.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.732-737
• /
• 2005

Distal 3D Real Object Duplication System(RODS) consists of 3D Scanner and Solid Freeform Fabrication System(SFFS). It is a device to make three-dimensional objects directly from the drawing or the scanning data. In this research, we developed an office type SFFS based on Three Dimensional Printing Process and a industrial SFFS using Dual Laser. An office type SFFS applied sliding mode control with sliding perturbation observer(SMCSPO) algorithm for control of this system. And we measured process variables about droplet diameter measurement and powder bed formation etc. through experiments. Also, in order to develop more elaborate and speedy system for large objects than existing SLS process, this study applies a new Selective Multi-Laser Sintering(SMLS) process and 3-axis dynamic Focusing Scanner for scanning large area instead of the existing $f\theta$ lens. In this process, the temperature has a great influence on sintering of the polymer. Also the laser parameters are considered like that laser beam power, scan speed, scan spacing. Now, this study is in progress to eveluate the effect of experimental parameters on the sintering process.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.04a
• /
• pp.515-518
• /
• 2011

본 연구는 3차원 인체 데이터 위에 가상 의류를 착장시키는 착장 시뮬레이션 시스템의 구현을 소개 한다. 인체 데이터는 3차원 전신 레이저 스캐너로 계측하였으며 가상의류는 의복의 앞뒷면 촬영 영상으로 하였다. 대상 의류는 원피스, 티셔츠, 바지 등과 같은 비교적 복잡하지 않은 구조의 의류이며, 본 논문에서는 상의 및 원피스의 착장 과정과 바지의 착장 그리고 바지위에 상의를 착장하는 중첩 착장의 과정을 보여준다. 가상 착장 결과로 실제 착장과 동일한 결과를 제공하기 때문에 치수가 자신에게 맞는지의 정보와 착장시의 어울림의 정보가 온라인상에서 육안으로 확인되도록 제공되며, 디지털 의류의 준비도 간단하여, 본 논문의 결과로 새로운 형태의 온라인 의류 판매 방식이 제시될 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2681-2690
• /
• 2010

This paper proposes 3D facial modeling system without using 3D scanner and camera or expensive software. This system enables efficient 3D facial modeling to cost reduction and effort saving for natural facial modeling. It detects edges of component of face using edge detection based on fuzzy logic from any 2D image of front face. It was mapped fitting position with 3D standard face model by detected edge more correctly. Also this system generates 3D face model more easily through floating and flexible control and texture mapping after fitting that connection of control point on detected edge from 2D image and mesh of 3D standard face model.

• Progress in Medical Physics
• /
• v.25 no.4
• /
• pp.233-241
• /
• 2014

The aim of this study is to develop a new software tool for 3D dose verification using $PRESAGE^{REU}$ Gel dosimeter. The tool included following functions: importing 3D doses from treatment planning systems (TPS), importing 3D optical density (OD), converting ODs to doses, 3D registration between two volumetric data by translational and rotational transformations, and evaluation with 3D gamma index. To acquire correlation between ODs and doses, CT images of a $PRESAGE^{REU}$ Gel with cylindrical shape was acquired, and a volumetric modulated arc therapy (VMAT) plan was designed to give radiation doses from 1 Gy to 6 Gy to six disk-shaped virtual targets along z-axis. After the VMAT plan was delivered to the targets, 3D OD data were reconstructed from 512 projection data from $Vista^{TM}$ optical CT scanner (Modus Medical Devices Inc, Canada) per every 2 hours after irradiation. A curve for converting ODs to doses was derived by comparing TPS dose profile to OD profile along z-axis, and the 3D OD data were converted to the absorbed doses using the curve. Supra-linearity was observed between doses and ODs, and the ODs were decayed about 60% per 24 hours depending on their magnitudes. Measured doses from the $PRESAGE^{REU}$ Gel were well agreed with the TPS doses at central region, but large under-doses were observed at peripheral region at the cylindrical geometry. Gamma passing rate for 3D doses was 70.36% under the gamma criteria of 3% of dose difference and 3 mm of distance to agreement. The low passing rate was resulted from the mismatching of the refractive index between the PRESAGE gel and oil bath in the optical CT scanner. In conclusion, the developed software was useful for 3D dose verification from PRESAGE gel dosimetry, but further improvement of the Gel dosimetry system were required.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.359-366
• /
• 2005

Airborne LiDAR integrated with on-board GPS/INS and scanning technology is a state-of the-art system for direct 3D geo-spatial data acquisition. In this study, LiDAR data were calibrated using ground points in calibration site for the higher system accuracy. The accuracy results are ${\pm}15{\sim}30\;cm$ in horizontal and ${\pm}15\;cm$ in vertical. The results show that LiDAR system has capability for precise DEM and contour generation, 3D urban modeling and engineering design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.160-161
• /
• 2019

As a method for modeling a three-dimensional object, there are a method using a 3D scanner, a method using a motion capture system, and a method using a Kinect system. Through this method, a portion that is not captured due to occlusion occurs in the process of creating a three-dimensional object. In order to implement a perfect three-dimensional object, it is necessary to arbitrarily fill the obscured part. There is a technique to fill the unexposed part by various image processing methods. In this study, we propose a method using GANs, which is the latest trend of unsupervised machine learning, as a method for more natural hole-filling.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.138-141
• /
• 2003

최근 어패럴 캐드 시스템을 지원하기 위해 3차원 레이저 스캐너로부터 획득된 데이터를 해석적 곡면으로 재구성하는 연구가 활발히 진행되고 있다. 이를 위해 역공학(reverse engineering)을 이용하여 인체를 모델링 하는 시도는 패션, 의료 둥의 분야에서 그 수요가 증가하고 있지만, 그 대상이 되는 인체가 매우 불규칙하기 때문에 기하학, 해석학적으로 접근하기가 어렵고, 시도 또한 미비한 실정이다. (중략)