• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.252-254
• /
• 2013

When Coming alongside the shallow water or narrow pier, they apply sea area with small mooring facilities and Floating matter because of the diversity of ships and limitation and effective in cutting expenses. However, when ships, applying Small mooring facilities and Floating matter, come alongside, there can be some impulse by waves between the Floating things and ships which possibly leads to mass disaster. Therefore, there should be forecasts and analysis of the movement caused by waves. On this Study, it introduces the composition and principles of the developed system provides the base of the movement traits through measuring 3-D exercise data and acceleration of the Mooring and Floating matters.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.153-160
• /
• 2017

Gait analysis has been conducted in various environments, but the biomechanics during the transition from uphill walking to downhill walking have not been reported. The purpose of this study is to investigate the knee and ankle joint kinematics and kinetics during walking on a triangle-shaped slope compared with those during level walking. Kinematic and kinetic data of eighteen participants were obtained using a force plate and motion capture system. The greater peak ankle dorsiflexion angle and moment and the peak knee extension moment were observed (p<0.05) during both uphill and downhill walking on the triangle-shaped slope. In summary, uphill walking on a triangle-shaped slope, which showed a peak knee flexion of more than $50^{\circ}$ with greater peak knee extension moment, could increase the risk of patellofemoral pain syndrome. Downhill walking on a triangle-shaped slope, which involved greater ankle dorsiflexion excursion and peak ankle dorsiflexion, could cause gastrocnemius muscle strain and Achilles tendon overuse injury.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2989-2995
• /
• 2014

This study was to performed to get the reference data of the kinematic parameters for normal subjects according to the arm movement type. Forty-five normal subjects participated in this study and preformed four sequence according to the arm movement type : normal arm movement, one arm movement, no arm movement, fitness arm movement. The study data was collected from June to August 2010. The kinematic data were measured using Vicon motion system 6MX3 cameras while each subjects walked through a 10m walkway. There were significant differences according arm movement type in the kinematic parameters such as range of motion (ROM) of the right pelvic, hip in sagittal plane, and ROM of the pelvic, hip, lumbar in coronal plane and ROM of the pelvic, thoracic, lumbar in transverse plane. This study can be utilized as the basic reference data in gait analysis for patients with pathologic gaits.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.43-43
• /
• 2011

최근 컴퓨터 기술의 발전으로 수심방향으로 완전한 운동방정식인 Navier-Stokes 방정식을 이용하는 3차원 수치모형에 의한 연구가 기초과학 분야인 수학에서부터 공학은 물론 의학 분야까지 광범위하게 진행되고 있다. 3차원 수치모형을 이용한 연구는 이론적으로 매우 우수하긴 하나 정확도 높은 결과를 얻기 위해서는 매우 조밀한 격자를 필요로 하기 때문에 아직까지 막대한 계산시간이 필요하다는 단점이 있으나 근래의 컴퓨터 기술이 엄청난 속도로 발전하고 있는 점을 감안할 때 적용 가능성은 계속 높아지고 있다. 이러한 흐름에 따라 해안공학 분야에서도 3차원 수치모형을 이용한 다양한 연구가 시도되고 있다. 복잡한 해안구조물로 인한 파랑변형 및 구조물의 안전성 등을 검토할 때 기존의 평면 2차원 수치모형이나 연직 2차원 수치모형으로는 재현이 힘들어 상대적으로 수치모형을 활용한 연구의 효용성이 낮았던 것에 비해 3차원 수치모형을 활용할 경우 복잡한 지형 및 구조물의 형상을 재현할 수 있기 때문에 좀 더 유용하게 사용될 수 있다. 한편, 파랑변형을 다루는 수치모형실험을 수행할 때 외부조파를 사용할 경우 구조물이나 지형에 의해 반사되어 나온 파랑이 조파지점에 도달할 때 실험영역으로 재 반사되는 문제가 발생한다. 이를 해결하기 위해 내부조파기법의 개발에 대한 연구가 필수적이었으며, 2차원 수치모형을 중심으로 그 연구가 매우 활발하게 진행되어 왔으나 Navier-Stokes 방정식 모형의 경우 상대적으로 연구가 미흡하였다. 본 연구에서는 3차원 Navier-Stokes 방정식 모형에서 내부조파기법을 도입하여 목표 파랑을 조파하였다. 수치모형은 Navier-Stokes 방정식을 엇갈림 격자체계에서 계산하는 유한차분모형으로 자유수면 추적에는 2차 정확도의 VOF(volume-of-fluid) 기법을 사용한다. 수치모형실험 결과를 일정한 수심을 전파하는 정현파의 해석해와 비교하였으며, 수치모형실험 결과가 비교적 정확하게 목표 파랑을 조파할 수 있음을 검증하였다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.2
• /
• pp.185-194
• /
• 2008

In this paper, an efficient technique is proposed to integrate the 3D user interface with the tiled display system in PC cluster environment. In the developed 3D user interface software, various menus are provided to increase the user friendliness of the interface, including the several model-control-commands. To eliminate the noise produced from the 3D user interface devices, the box filtering algorithm is employed. Further, a communication splitting algorithm, which is a kind of asynchronous communication method, is proposed to reduce the motion delay between the 3D interface and the tiled display system, and its efficiency is validated through the benchmarking tests.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.2
• /
• pp.137-147
• /
• 2003

The fuzzy control and implementation of a new three-dimensional(3-D) inverted pendulum system are addressed. In comparison with conventional 1-D and 2-D systems, the 3-D inverted pendulum system is a proper benchmark system to simulate human's control action which includes the up and down motion to stabilize an inverted pendulum. To investigate the characteristics of the 3-D inverted pendulum system and to design of a fuzzy controller, we derive dynamic equations of the mechanism including a 3-axis cartesian robot and an inverted pendulum. We propose a design method of a fuzzy controller of the yaw and pitch angles of an inverted pendulum. In the design, the redundant degree-of-freedom(DOF) of the robot and the constrained workspace are taken into account. The performance of the proposed system is proved by experimental results using a developed PC-based Multi-Motion Control(MMC) board.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.241-243
• /
• 2011

인체동작 인식에 대한 연구는 재활치료, 운동선수의 동작 교정 및 모니터링, 3차원 애니메이션 제작등 많은 분야에서 필요로 하고 있다. 동작 인식에 대한 일반적인 방법으로는 반사 마커를 부착하여 여러 대의 적외선 카메라로 관절 운동을 관찰하는 방식이였다. 이러한 방식은 여러 개의 마커를 사용자들이 옷을 벗고 몸에 붙이거나 특수 복장을 착용해야 하는 불편함이 있을 뿐만 아니라 초기 위치 보정에도 많은 시간이 소모된다. 이와 같은 문제점을 해결하기 위하여 본 연구에서는 어떠한 특수 장비를 착용하거나 몸에 부착하지 않고 즉각적으로 인체의 움직임을 트래킹 할 수 있는 마커리스 트래킹시스템을 개발하였다. 이 시스템은 사람의 동작 분석을 하는데 있어 빠르게 측정 및 분석이 가능하고 특수 장비를 착용하지 않아도 됨으로 인해 동작에 방해를 받지 않아서 3차원 영상을 즉각적으로 확인할 수 있는 편리성을 갖추고 있다.

• Korean Journal of Applied Biomechanics
• /
• v.12 no.1
• /
• pp.125-133
• /
• 2002

The purpose of this study was to develop a method for estimating 3-D coordinates of lower trunk muscles using orientation angles during a motion. Traditional 3-D motion analysis system with DLT technique was used to track down the locations of eight reference markers which were attached on the back of the subject. In order to estimate the orientations of individual lumbar vertebrae and musculoskeletal parameters of the lower trunk muscle, the rotation matrix of the middle trunk reference frame relative to the lower trunk reference frame was determined and the angular locations of individual lumbar vertebrae were estimated by partitioning the orientation angles (Cardan angles) that represent the relative angles between the rotations of the middle and lower trunks. When the orientation angles of individual intervertebral joints were known at a given instant, the instantaneous coordinates of the origin and insertion for all selected muscles relative to the L5 local reference frame were obtained by applying the transformation matrix to the original coordinates which were relative to a local reference frame (S1, L4, L3, L2, or L1) in a rotation sequence about the Z-, X- and Y-axes. The multiplication of transformation matrices was performed to estimate the geometry and kinematics of all selected muscles. The time histories of the 3-D coordinates of the origin and insertion of all selected muscles relative to the center of the L4-L5 motion segment were determined for each trial.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.46-55
• /
• 2006

In general, 3-dimensional point-mass equation has been widely used for the trajectory optimization of the fixed-wing aircraft and reentry vehicle. But it should be modified and represent target vehicle's own characteristics. For a lighter-than-air vehicle such as an airship, there exists different and peculiar flight characteristics compared with the aircraft. The first part of this paper is to derive the dynamic equation of motion for the mid-altitude unmanned airship and the second part is to obtain the optimal trajectories under the minimal time flight given constraints. The trajectory optimization problem is converted into the nonlinear programming problem using Sequential Quadratic Programming approach. Finally numerical solutions are presented in the last part of the paper.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.948-956
• /
• 2012

This paper presents the computations of the longitudinal and directional stability derivatives for the SDM(Standard Dynamic Model). The static and dynamic derivatives are evaluated at once using forced harmonic oscillations in the pitch and yaw directions. For the numerical simulations, a 3-D Euler solver that uses a dual time stepping method for unsteady time accurate simulations is applied. This work investigates the variation of the derivatives in terms of the Mach number and the several motion parameters. Good agreement of the pitch and yaw stability derivatives with previously published numerical results and experimental results are observed.