• 주택과사람들
• /
• no.58 s.75
• /
• pp.95-103
• /
• 1996

• 주택과사람들
• /
• s.3
• /
• pp.120-122
• /
• 1990

• 주택과사람들
• /
• no.31 s.48
• /
• pp.148-166
• /
• 1994

• 주택과사람들
• /
• s.84
• /
• pp.108-118
• /
• 1997

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.5
• /
• pp.110-119
• /
• 2009

In this study magnetic fields near electric power lines with branch lines which have a arbitrary angle were derived and formulated by dipole antenna theory and could be calculated easily using the formula. It seems that those formula could be applicable to the consideration of magnetic fields during the design of distribution lines with branch lines. As an example those formulated equations on elements of magnetic fields were applied to a model of 3 phase distribution lines with branch lines and calculated by Matlab programs and the results were presented The analyzed results are follows. The resultant magnetic field is dominated by the componant By all over y-axis in the case of the smaller branched angle $\alpha$ and the lower observed point z. In case of ${\alpha}=\frac{\pi}{2}$[rad], the resultant field is affected by the componant Bx. The resultant field is dominated by the componant Bz at the vicinity of the power lines and it shows very large value at the branch line position of y-axis in case of ${\alpha}>\frac{\pi}{2}$.

• The KIPS Transactions:PartA
• /
• v.19A no.2
• /
• pp.77-84
• /
• 2012

Speculative execution for improving instruction-level parallelism is widely used in high-performance processors. In the speculative execution technique, the most important factor is the accuracy of branch predictor. Unfortunately, complex branch predictors for improving the accuracy can cause serious thermal problems in 3D multicore processors. Thermal problems have negative impact on the processor performance. This paper analyzes two methods to solve the thermal problems in the branch predictor of 3D multi-core processors. First method is dynamic thermal management which turns off the execution of the branch predictor when the temperature of the branch predictor exceeds the threshold. Second method is thermal-aware branch predictor placement policy by considering each layer's temperature in 3D multi-core processors. According to our evaluation, the branch predictor placement policy shows that average temperature is $87.69^{\circ}C$, and average maximum temperature gradient is $11.17^{\circ}C$. And, dynamic thermal management shows that average temperature is $89.64^{\circ}C$ and average maximum temperature gradient is $17.62^{\circ}C$. Proposed branch predictor placement policy has superior thermal efficiency than the dynamic thermal management. In the perspective of performance, the proposed branch predictor placement policy degrades the performance by 3.61%, while the dynamic thermal management degrades the performance by 27.66%.

• LP가스
• /
• v.21 no.6
• /
• pp.58-61
• /
• 2009

한국가스안전공사가 집계한 2009년 3/4분기 가스사고 발생현황을 게재한다. 본지에 게재되는 내용이 가스사고 예방에 도움이 되기를 기대한다.

• Journal of Chest Surgery
• /
• v.41 no.3
• /
• pp.399-403
• /
• 2008

Carinal resection is technically demanding and the surgical risk is relatively high. When tumor is confined around the carina, then lung parenchymal sparing surgery is technically feasible in selected cases. We performed carinal resection and reconstruction without pulmonary resection for a patient suffering with squamous cell carcinoma that involved the carina and this patient had undergone right upper lobectomy 19 months previously due to lung cancer.

• 주택과사람들
• /
• no.3 s.20
• /
• pp.50-57
• /
• 1992

건설부는 검인계약서를 기초자료로 하여 조사한 ''91. 3/4분기 토지거래현황을 행정구역별, 용도지역별, 매입자 거주지별, 거래주체별 등으로 분석한 결과를 발표한 바, 그 내용은 다음과 같다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.4
• /
• pp.435-450
• /
• 2020

The divergence section of a double-deck tunnel can be divided into a 'widening pre-divergence section', a large cross-section with a cap shape and a 'post-divergence section' where the separation between the main and the branch tunnel is made. Since the cross-section of the widening pre-divergence section is considerably larger than that of the post-divergence section, the influence of excavation due to the different sizes and shapes in the cross-section should be considered in the examination of the tunnel stability. In this study, the effect of the preceding excavation, that is the excavation of the widening pre-divergence section, on excavation stability of the post-divergence section was examined by varying the excavation methods and bench lengths through 3D finite element analysis. The results showed that although the effects of the excavation methods and the bench lengths are not significant on the variation of principal stresses, the preceding excavation causes a relatively large variation on the stresses which may have an impact on the stability of the post-divergence section from the comparison of Stress-Strength Ratio (SSR) between the cases with and without the consideration of the preceding excavation effect by 2D finite element analysis.