• The Journal of Sustainable Design and Educational Environment Research
• /
• v.23 no.2
• /
• pp.1-10
• /
• 2024

This study presents a model for educational planning based on user participatory design for the purposes of curriculum development and educational space innovation. It reviewed previous research and practices related to educational space innovation, educational planning processes, and user participation design and suggested a draft model. This model was applied in the renovation project of an elementary school, and the problems encountered during the application were reflected upon and used to improve the model. The final model comprises four phases. Phase 1 is an initial exploratory phase foruser participation, where educational planners and users form a shared perspective regarding the future of education. Phase 2 is a needs-analysis phase for the transition to future education, which focuses on setting the overall direction of the school-level curriculum. Phase 3 specifies the direction of future school curricula and identifies needs for educational spaces. Finally, Phase 4 focuses on the interaction between educational and space planners. Based on the above discussion, the study discussed the benefits and limitations of this educational planning model for school space innovation.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.3 s.7
• /
• pp.58-66
• /
• 2001

Turnkey project, also called Design-Build project, has been expanding and diversifying its business into the Korean market. However, it has been experiencing numerous difficulties due to a large number of change orders on the public turnkey project. Change order during the construction phase impact on time deliveries, budget and quality on a turnkey project. In preparation for this, the government has to improve the awarding procedure and general conditions for turnkey projects. Contractors should also cooperate with their co-working partners and establish a standardized procedure, which provides change order control for efficient implementation on the construction site.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.2
• /
• pp.115-121
• /
• 2015

The objective of this study is to present the design approach of low $CO_2$ concrete structures for reduction of $CO_2$ emissions. The design approach was implemented considering the system boundary for each processing presented in the ISO 13315-2. As for life-cycle inventory(LCI) for $CO_2$ assessment of concrete structures, data provided from domestic LCI DB was used. Based on the process presented in this study, case studies on the life-cycle $CO_2$ assessment of shear wall concrete structure was conducted. As substitution level of GGBS is 25%, the amount of $CO_2$ emissions and $CO_2$ uptake by concrete carbonation was decreased in the material, demolition and crushing, and transport phase. The amount of $CO_2$ emissions of column and total member was decreased by 26% and 22% respectively, compared to that of OPC.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.422-424
• /
• 2012

본 연구에서는 수상위에 진수된 콘크리트 플로팅 폰툰에 상부골조를 단계별로 시공함에 따라 발생하는 추가 처짐이 상부골조에 미치는 영향을 고찰하고 하였다. 이러한 추가변형에 의한 상부골조에 추가 모멘트량을 산정하는 해석절차를 제시하였으며 제시된 절차에 따라 3층 예제 철골 건물을 해석하고 분석하였다. 제시된 시공단계를 고려한 해석 방법과 비교하여, 상부골조를 지반위에 고정하여 모델링하는 일반적인 해석은 수직하중에 의한 변형을 무시하여 설계하중을 과소평가 하며, 플로팅 구조물을 전체적으로 모델링하고 하부 폰툰에 등가의 스프링으로 치환하여 하중을 동시에 재하하는 모델은 과대한 처짐의 영향으로 설계하중을 과대 평가함을 알게 되었다.

• Construction Engineering and Management
• /
• v.20 no.3
• /
• pp.26-33
• /
• 2019

• 기계와재료
• /
• v.25 no.3
• /
• pp.68-85
• /
• 2013

나노제품의 안전성은, 나노제품에 사용된 나노물질의 독성과 나노물질의 노출가능성을 동시에 고려함으로써 평가할 수 있다. 본 문서는 나노물질의 독성 데이터는 이미 확보된 것으로 가정하고, 나노제품의 안전성을 향상시키는 설계 절차에 대하여 기술한다. 나노제품에서 나노물질이 노출되는 정도를 기계적인 손상의 관점에서 평가함으로써 노출 가능성을 추정하고, 이 추정치를 나노물질의 독성값 및 노출 한계와 비교함으로써 나노제품의 안전성을 평가하거나 예측한다. 나노제품의 설계 단계에서 이러한 안전성 평가 및 예측 방안을 적용하는 방법을 설명한다.

• Journal of the Korean GEO-environmental Society
• /
• v.10 no.3
• /
• pp.29-36
• /
• 2009

In this paper, a case of a high-rise building supported by a large-diameter drilled shaft socketed in a weathered ground has been studied. The design case of pile foundation presented in this paper could be a representative example of execution of pile design through three(3) design stages of "preliminary design-proof test-supplementary design". As proof test, two(2) BDH PLT (Bi-directional High Pressure Pile Load Test) were performed at the early construction stage. By following the design process of this way, the economic pile design could be carried out and a large amount of construction cost saving could be realized.

• Journal of Navigation and Port Research
• /
• v.36 no.3
• /
• pp.225-232
• /
• 2012

In this research, the influence of additional vertical deformation of floating pontoon when dead load of each story is loaded during construction was investigated. The analysis procedure is presented for considering the influence of the additional deformation to calculate the additional moment of super-frame. Following the procedure, an example building with 3 storied steel frame was analyzed. Analysis method that taking no account for deformation of pontoon to the modeling was underestimated by ignoring design load following deformation of vertical load. By operating the load at the same time, design load under the influence of large deflection of model which whole modeling of floating structure was overestimated. So analysis method of floating structure considering the construction sequences demonstrated the suitable method.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.3 s.25
• /
• pp.156-166
• /
• 2005

The purpose of this study is to present proper VE application methods to euly design phases. Since VE methodology is more effective on early stage of design phase, the study focused on application of VE methodology in early stage of design process. With the examination of past studies, obstacles of VE application in domestic construction industry are defined. To solve these problems, this paper presents (1) subdivision of VE execution time, (2) an appropriate VE targeting method for construction industry, (3) a resonable and practical function analysis process, and (4) modified design-VE job plan.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.68-73
• /
• 2008

Recently, construction management technology based on information technology is being changed from numerical information management to visual information management with virtual reality (VR) method. This study suggests a IDEF0 model for development process of VR system for the planning, design and construction phases of civil engineering project. And the simulation functions by each phase based on VR were developed by using the suggested IDEF0 model. The developed virtual construction system can be used as an effective design review tool by visualization of design information based on 3D object.