• 한국전문물리치료학회지
• /
• 제6권3호
• /
• pp.1-10
• /
• 1999

The purpose of this study was to determine whether high voltage pulsed current stimulation (HVPCS) would enhance wound healing in neuropathic rabbits. Ten rabbits were assigned to either an experimental or a control group. The wounded part around the peripheral neuropathy of the experimental rabbits was stimulated for two hours twice a day for six days under the following conditions: pulse frequency 80 pps, pulse duration $100{\mu}s$, and stimulation intensity 30~40 V. The results indicated that there was no difference in the wound closure between the experimental and control groups. The two groups showed similar aspects in collagen and reticulum, which were observed by colored Masson's trichome. While the rabbits in the control group had more or less thick fibers, the rabbits in the experimental group had thin and branched-shape fibers. The rabbits in the experimental group showed both strong responses in the shaping of elastic fibers and the increased aspects in fibroblast when compared with the control group.

• Journal of Advanced Marine Engineering and Technology
• /
• 제28권8호
• /
• pp.1270-1278
• /
• 2004

This paper describes the effectiveness of laser pulse shaping in eliminating weld defects such as porosity, cracks and undercuts in pulsed Nd:YAG laser welding. A large porosity was formed in a keyhole mode of deeply penetrated weld metal of any stainless steel. Solidification cracks were present in STS 310S with above 0.017%P and undercuts were formed in STS 303 with about 0.3%S. The conditions for the formation of porosity were determined in further detail in STS 316. With the objectives of obtaining a fundamental knowledge of formation and prevention of weld defects, the fusion and solidification behavior of a molten puddle was observed during laser spot welding of STS 310S through a high speed video photographing technique. It was deduced that cellular dendrite tips grew rapidly from the bottom to the surface, and consequently residual liquid remained at the grain boundaries in wide regions and enhanced the solidification cracking susceptibility. Several laser pulse shapes were investigated and optimum pulse shapes were proposed for the reduction and prevention of porosity and solidification cracking.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제2C권6호
• /
• pp.304-308
• /
• 2002

We demonstrate a simple pulsed $CO_2$ laser with millisecond long pulse duration in a tube at a low pressure of less than 30 Torr. The novel power supply for our laser system switches the voltage of the AC power line (60Hz) directly. The power supply doesn't need elements such as a rectifier bridge, energy-storage capacitors, or a current-limiting resistor in the discharge circuit. To control the laser output power, the pulse repetition rate is adjusted up to 60Hz and the firing angle of SCR(Silicon Controlled Rectifier) gate is varied from 30。 to 150。. A ZCS (Zero Crossing Switch) circuit and a PIC one-chip microprocessor are used to control precisely the gate signal of the SCR. The maximum laser output of 35 W is obtained at a total pressure of 18 Torr, a pulse repetition rate of 60 Hz, and a SCR gate firing angle of 90。 . In addition, the resulting laser pulse width is approximately 3㎳(FWHM). This is a relatively long pulse width, compared with other repetitively pulsed $CO_2$ lasers.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.60-65
• /
• 2000

The structural and electrical characteristics of PLZT thin films fabricated onto Pt/Ti/SiO\ulcorner/Si substrates by a pulsed laser deposition were investigated to develop the high dielectric thin films were fabricated with different energy density by pulsed laser deposition. This PLZT thin films of 5000 thickness were crystallized at 600 $^{\circ}C$, 200 mTorr O\ulcorner pressure for 2 J/$\textrm{cm}^2$ laser energy density, the arain structure was transformed from planar to columnar grain. It was clearly noted from the SEM observations that oxygen pressured laser powers affect microstructures of the PLZT thin films. 14/50/50 PLZT this film showed a maximum dielectric constant value of $\varepsilon$\ulcorner=1289.9. P-E hysteresis loop of 14/50/50 PLZT thin film was flim ferro-electric. Leakage current density of 14/50/50 PLZT thin film was 10\ulcorner A/$\textrm{cm}^2$.

• 대한수의학회지
• /
• 제39권4호
• /
• pp.811-818
• /
• 1999

A total of 16 Staphylococcus epidermidis isolates collected from 14 dogs admitted to the Veterinary Medicial Teaching Hospital in Seoul National University over eleven months were examined for in vitro antibiotic susceptibility pattern with minimum inhibitory concentration (MIC) and slime production, a virulence-associated phenotype, and were genetically characterized by pulsed-field gel electrophoresis (PFGE). The frequency of resistance to antimicrobial agents tested was not high, with a susceptibility ranging from 56.3% to 100%. Three strains exhibited multiple drug resistance against amikacin (MIC, $32-64{\mu}g/ml$), ampicillin ($32{\mu}g/ml$), fosfomycin ($32-128{\mu}g/ml$) and gentamicin ($16{\mu}g/ml$). Vancomycin, ciprofloxacin and rifampin were effective antibiotics against the isolates. All isolates were slime producers ; strains isolated from dogs which died of bacteremia were more likely to produce slime than those isolated from dogs which survived. Chromosomal DNA fingerprinting of the isolates yielded 16 different genomic types with few common bands, indicating a variety of clones of S epidermidis were prevalent in the hospital. This study revealed that PFGE is an useful method for the genotype characterization of S epidermidis strains and this organism could probably be pathogenic in some dogs with severe disorders. Further works on a larger number of epidemiologically defined strains are required to assess these results.

• Food Science and Biotechnology
• /
• 제18권6호
• /
• pp.1358-1364
• /
• 2009

Electric polarity of working electrode and counter electrode was periodically switched at the intervals of 30 sec. Electric current generated by anodic and cathodic reaction of working electrode was reached to +30 and -12 mA in low intensity pulsed electric field (LIPEF). The yeast growth, ethanol production, and malate consumption in the initial cultivation time were more activated in the LIPEF than the conventional condition (CC). Polyphenol, total phenolic contents (TPC), and total flavonols (TF) were gradually decreased in all cultivation conditions during incubation for 2 weeks but antioxidation activity was not. TF was significantly lower in 3 and 4 V of LIPEF than CC and 2 V of LIPEF; however, the polyphenol, TPC, and antioxidation activity were a little influenced by the LIPEF. After ripening of the winemaking culture for 15 days, polyphenol, TPC, and TF were a little increased but the antioxidation activity was not.

• 한국표면공학회지
• /
• 제44권5호
• /
• pp.185-189
• /
• 2011

$Cu_2ZnSnSe_4$ thin films for solar absorber application were prepared by pulsed laser deposition of a synthesized $Cu_2ZnSnSe_4$ compound target. The film's composition revealed that the deposited films possess an identical composition with the target material. Further film compositional control toward a stoichiometric composition was performed by optimizing substrate temperature, deposition time and target rotational speed. At the optimum condition, X-ray diffraction patterns of films showed that the films demonstrated polycrystalline stannite single phase with a high degree of (112) preferred orientation. The absorption coefficient of $Cu_2ZnSnSe_4$ thin films were above 104 cm.1 with a band gap of 1.45 eV. At an optimum condition, films were identified as a p type semiconductor characteristic with a resistivity as low as $10^{-1}{\Omega}cm$ and a carrier concentration in the order of $10^{17}cm^{-3}$.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.179-180
• /
• 2012

Aluminum alloys are widely known as non-ferrous metal with light weight and high strength. Consequently, these materials take center stage in the aircraft and automobile industry. The Al7075 aluminum alloy is based on the Al-Zn-Mg-Cu and one of the strongest wrought aluminum alloys. Aluminum nitride has ten times higher thermal conductivity($319W/m{\cdot}K$) than Al2O3 and also has outstanding electric insulation($1{\times}1014{\Omega}{\cdot}cm$). Furthermore, it has high mechanical property (430 MPa) even though its co-efficient of thermal expansion is less than alumina For these reasons, it has great possibilities to be used for not only the field which needs high strength lightweight but also electronic material field because of its suitability to be applied to the insulator film of PCB or wafer of ceramic with high heat conduction. This paper investigates the mechanical properties and corrosion behavior of aluminum alloy Al7075 deposited with aluminum nitride thin films To improve the surface properties of Al7075 with respect to hardness, and resistance to corrosion, aluminum nitride thin films have been deposited by pulsed DC reactive magnetron sputtering. The pulsed DC power provides arc-free deposition of insulating films.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2192-2194
• /
• 1999

In this study, We have accomplished a new approach to develope a cheap and compact pulsed $CO_2$ laser system. We used a fast SCR as switching device instead of a thyatron in the pulsed power supply. Using the Pulse transformer, energy in the condenser is tranferred to the secondary, electrodes of discharge tube, from the primary. An axial and water cooled type was adopted as the laser cavity. The laser performance characteristics as various parameters, such as gas pressure and pulse repetition rate, have been investigated. As a result, the maxium laser output was 12.3[W] at a pulse repetition rate of 120[pps] and a filling pressure of 12[Torr].

• 한국재료학회지
• /
• 제17권9호
• /
• pp.475-479
• /
• 2007

Pulsed laser deposition was utilized to grow MnS thin films on c-sapphire substrate using a KrF excimer laser at growth temperatures that ranged from room temperature to $700^{\circ}C$. The results of X-ray diffraction (XRD) and UV-visible spectroscopy were employed to investigate the structural and optical properties of the MnS films. While the growth rate decreased as $T_s$ increased, the overall quality of the film improved. The highest quality MnS film was obtained at $700^{\circ}C$. Variations in the $T_s$ resulted in the MnS films exhibiting different growth mechanisms. The oriented (200) rocksalt MnS film was grown at room temperature. In the case of higher $T_s,\;200{\sim}500^{\circ}C$, the films consisted of mixed phases of rocksalt and wurtzite. The main structure of the films was altered to (111) rocksalt when the temperature was increased to in excess of $600^{\circ}C$. This behavior may very well be the result of elements such as surface energy and atomic arrangement during the growth process. The optical band gap of the obtained ${\alpha}-MnS$ film was estimated to be 3.32 eV.