• The Korean Journal of Pain
• /
• v.13 no.2
• /
• pp.149-155
• /
• 2000

Background: Pulsed radiofrequency (RF) lesioning is a painless procedure and causes no neurodestruction and neuritis-like reaction are common following conventional RF lesioning. There is little data about the effect of pulsed RF especially with regard to its suitability for the treatment of acute pain. The possibility of a placebo effect cannot be ruled out because a double-blind study was not performed in previous studies. There is also no neuropathologic study about pulsed RF. Methods: The rats were anesthetized with sodium pentobarbital (40 mg/kg, i.p.; supplemented as necessary). The common sciatic nerve was exposed by blunt dissection through biceps femoris. Pulsed RF was administered to the common sciatic nerve using a 30 ms/s pulse with for 120 seconds. The temperature reached was no more than $42^{\circ}C$. Analgesia was determined using hot-plate assay shortly and, 3 days and 1 week before, and 2 weeks after operation. Lesions were examined with LM (light microscope) and EM (electron microscope) 2 weeks later. Results: There were no differences in response latencies between the control and experimental group. There were many vacuoles with hyaline bodies in the Schwann cell cytoplasm rather than axon in LM and larger electron dense bodies. No changes were found in the axon or unmyelinated fibers. Only small changes were found in the sheaths of myelinated fibers and Schwann cells. Conclusions: We therefore do think that any analgesic effect of pulsed RF is not a result of block of neural conduction. But rather than it can be attributed to others factors. It was also ineffective as a treatment for acute pain such as that caused by the hot-plate test.

• Journal of the Korean Academy of Clinical Electrophysiology
• /
• v.1 no.1
• /
• pp.87-100
• /
• 2003

The present studies have been designed to evaluate the effect of acute wound healing that frequency and intensity of pulsed ultrasound application in diabetic rat. Mild diabetes mellitus was induced in rat with 45 mg/kg streptozotocin. The results were analyzed and summarized as follows: 1. The rate of wound length on ultrasonic capacity in $1.0\;W/cm^2$ $SATA_i$ group was more significantly decreased than $0.5\;W/cm^2$ $SATA_i$ group. 2. In the histological change, the $1.0\;W/cm^2$ $SATA_i$ application group was more effective than $0.5\;W/cm^2$ $SATA_i$ group, decrease of inflammatory cell was significantly in several groups. From the conclusions above, in this study application of 3 MHz pulsed ultrasound in acute wound healing, $1.0\;W/cm^2$ $SATA_i$ capacity can be an effective way of promotion wound healing than $0.5\;W/cm^2$ $SATA_i$ capacity in diabetic rat.

• International Journal of Korean Welding Society
• /
• v.3 no.1
• /
• pp.29-33
• /
• 2003

The ferritic stainless steels are generally considered to have poor weldability compared with that of the austenitic stainless steels. However the primary advantages of ferritic stainless steels include lower material cost than the more commonly used austenitic stainless steels and a greater resistance to stress corrosion cracking. Thus, the weldability of ferritic stainless steels was investigated in this study. In concerning the weldability, Grain size measurement test, Erichsen test and Varestraint test were involved. full penetration welds were produced by autogeneous direct current straight polarity (DCSP) and pulsed currents gas tungsten arc welding (GIAW) and the effect of pulsed currents welding on the welds was compared to that of DCSP welding. The results showed that pulsed current was effective to refine grain size in the weld metal and the finest grain size was obtained at the frequency of 150Hz. In addition, the ductility of welds was lower than that of base metal. Finally, autogeneous type 444 welds were less susceptible to macro solidification cracks, but more sensitive to micro cracks; SEM/EDS analysis indicated that all the inclusions in the crack showed enrichment of Mn, Si, O and S.

• 한국연소학회:학술대회논문집
• /
• 1999.10a
• /
• pp.117-128
• /
• 1999

The removal of nitrogen oxides(NOx) from $N_{2}/O_{2}$ gas using a pulsed corona discharge was investigated as a function of the reduced electric field(E/N) and the energy density(J/L). A kinetic model was developed to characterize the chemical reactions taking place in a pulsed corona discharge reactor. The model calculates the fractional concentrations of radical species at each pulse-on period and utilizes the radicals to remove NOx for the subsequent pulse-off period. Electron collision reaction data are calculated using ELENDIF program to solve Boltzmann equation for electron energy distribution function, and the subsequent chemical reactions are calculated using CHEMKIN-II program to solve stiff ODE(ordinary differential equation) problems for species concentrations. The corona discharge energy per pulse and the time-space averaged E/N were obtained by fitting the model to experimental data. The model calculation shows good agreement with the experimental data, and predicts the formation of other species such as $NO_{2}$, $O_{3}$ and $N_{2}O$.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.23 no.3
• /
• pp.78-83
• /
• 2010

Objectives : The purpose of this study is to compare the principles between moxibustion and the 'Intense pulsed light (IPL)' and to investigate the clinical application of the photo-moxa for the Korean medicine fields. Methods : The characteristics of moxibustion, IPL, parabolic reflector moxa and the dermatology surgical use of moxibustion were reviewed in the literature. Results : IPL is one type of light treatments that is employed by radiating the short-pulse wave, which is transformed from the light of high intensity. There has been used parabolic reflector in Asia for more than 2,000 years, and this hand-held device used for moxibustion in traditional medicine. Moxibustion is one of the treatment tools in Korean medicine using the heat energy. The fluence or energy density of IPL in clinical circumstances is similar to parabolic reflector moxa of moxibustion. IPL and parabolic reflector moxa shared same treatment principle employing the heat energy. Therefore IPL could apply for many indications in Korean medicine as a moxibustion tool and acupuncture. Conclusions: IPL may be plausible to be a fascinate method in phototherapy of Korean medicine.

• The Journal of Korean Physical Therapy
• /
• v.21 no.4
• /
• pp.97-102
• /
• 2009

Purpose: The purpose of this study was to investigate the effects of low intensity pulsed ultrasound on TGF-$\beta$1 expression and healing of rat femur penetrating fractures. Methods: Rats were anesthetized with ketamine and xylazine. Using aseptic technique, we exposed the lateral right femoral diaphysis with removal of the periosteum. We made one hole along its long axis with an electrically-driven 1.8 mm diameter drill bit. Postoperatively, rats were divided into two groups (a control group, n=15; an experimental group, n=15). The experimental group was treated with low intensity pulsed ultrasound (pulse rate: 1:4, 0.5 W/$cm^2$, 10 minutes, 1 time per day) for 3 weeks. The control group was treated with sham ultrasound (with the US unit turned off). Results: The experimental group achieved more callus formation and TGF-$\beta$1 expression than the control group at the $7^{th}$, $14^{th}$ and $21^{st}$ days after low intensity pulsed ultrasound treatment. Conclusion: This study suggests that low intensity pulsed ultrasound facilitates bone fracture repair, possibly via increased TGF-$\beta$1 expression.

• Korean Journal of Materials Research
• /
• v.18 no.8
• /
• pp.411-416
• /
• 2008

In this research, fine-structure TiO2 bulks were fabricated in a combined application of magnetic pulsed compaction (MPC) and subsequent sintering and their densification behavior was investigated. The obtained density of $TiO_2$ bulk prepared via the combined processes increased as the MPC pressure increased from 0.3 to 0.7 GPa. Relatively higher density (88%) in the MPCed specimen at 0.7 GPa was attributed to the decrease of the inter-particle distance of the pre-compacted component. High pressure and rapid compaction using magnetic pulsed compaction reduced the shrinkage rate (about 10% in this case) of the sintered bulks compared to general processing (about 20%). The mixing conditions of PVA, water, and $TiO_2$ nano powder for the compaction of $TiO_2$ nano powder did not affect the density and shrinkage of the sintered bulks due to the high pressure of the MPC.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.4
• /
• pp.32-36
• /
• 2018

For various oxygen($O_2$) to argon(Ar) gas ratio, aluminum-doped zinc oxide(AZO) films were deposited for 3 min at different duty ratio by changing reverse pulse times. As the duty ratio increased, the thickness of the AZO film decreased and the sheet resistance increased. It can be concluded that When sputtering AZO Thin film, oxygen interfered with sputtering. When the reverse time was increased, the thickness of AZO was proportional to the real sputtering time and decreased. From the optical transmittance and sheet resistance, it was possible to obtain a higher figure of merits of AZO at a lower reverse pulse time. Even at the short reversed pulse time, it can be concluded that the accumulated charges on the AZO target are completely cleared. At a lower reverse pulse time, pulsed-DC sputtering of AZO is expected to be used instead of DC sputtering in the deposition of transparent conductive oxide(TCO) films without any degradation in thickness and structural/electrical characteristics.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.379-381
• /
• 2002

The major electron transfer cofactors in photosystem II have been studied by pulsed EPR, pulsed electron electron double resonance (PELDOR) and laser excited spin polarized electron spin echo envelope modulation (ESEEM) methods, in non-oriented and oriented photosystem II membranes. Distances between radical pairs were determined trom the observed dipole interaction constants to be 27.3 A for P680-QA, 30 A, etc. with the error within 1 A. Angles between the distance vector and membrane normal was determined by orientation dependence of oriented membranes with the accuracy of 5˚ The results were compared with the recent structural data by X-ray analysis.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1114-1116
• /
• 2002

The characteristics of voltage drop and THD for parallel operating 11 PCRs (Phase Controlled Rectifiers) are analysed. The PCRs are used to drive high current (1.6 kA ${\sim}$ 3.7 kADC) electromagnetic coils for electromagnets. All the PCRs operate simultaneously in pulsed mode, and the pulse shot occurs every 150 seconds. During the pulse operation the PCR output current ramps up for 4 seconds, and then keeps flat top state for 2 seconds, and finally ramps down for 4 seconds. For the flat top mode a severe voltage drop and distortion appear in the power system because transformers for the PCRs are designed considering pulsed mode operation. It is expected that the analysis method can be applied to improve the system performance including power factor and design of high power pulsed mode operating power supply systems.