• Journal of Science Education
• /
• v.46 no.3
• /
• pp.223-236
• /
• 2022

The purpose of this study is to investigate pre-service elementary teachers' awareness on the sources of microplastics. The participants were 75 male and 91 female undergraduates. A 15-item survey questionnaire was developed based on prior researches regarding microplastics emission sources and were modified through expert review and preliminary research. The survey results show that over 80% of the respondents had heard of microplastics before through news, internet, TV, etc. However, they tended not to be aware that things such as lab coats, wet tissue, dust protective mask, or paper cup were made of microplastics-causing substances. For the questions on the expected situation of microplastics contamination, the frequency of their choices were relatively low in 'Tires of cars running are worn out' and 'The gum stuck to the floor becomes smaller.' These results show that many of them were not aware that synthetic fiber or synthetic rubber was one of the microplastics emission sources. Gender differences were found in the attitudes toward microplastics problems. Female students are more interested in the issues and are more willing to participate in the solution, and recognize the need for more education on microplastics. The implications and future directions for science education were discussed.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.629-635
• /
• 2015

In this paper, we propose the reefer container monitoring system that not only monitors internal temperature, humidity of reefer container but also tracks the real-time location using GPS. It consists of a tag of information of situation using 433MHz RF transmitter(communication), GPS to track the real-time location and a device using WCDMA/GSM communication to transmit information to the server. We tested by applying the proposed system in reefer containers with yellow melons, melons transported from Korea to Singapore to track the location and check the temperature and the humidity. The result of this test is that there is a temperature difference around 1.7 degree depending on the position of inside of container and maintains the humidity stably about 97%. If we apply this proposed system to agricultural marketing, it is possible to get the time that fruits start to decay and minimize the loss of fruits by decaying during shipping.

• The Journal of Society for e-Business Studies
• /
• v.27 no.2
• /
• pp.205-218
• /
• 2022

Recently, digital transformation in manufacturing has been accelerating. It results in that the data collection technologies from the shop-floor is becoming important. These approaches focus primarily on obtaining specific manufacturing data using various sensors and communication technologies. In order to expand the channel of field data collection, this study proposes a method to automatically collect manufacturing data based on vision-based artificial intelligence. This is to analyze real-time image information with the object detection and tracking technologies and to obtain manufacturing data. The research team collects object motion information for each frame by applying YOLO (You Only Look Once) and DeepSORT as object detection and tracking algorithms. Thereafter, the motion information is converted into two pieces of manufacturing data (production performance and time) through post-processing. A dynamically moving factory model is created to obtain training data for deep learning. In addition, operating scenarios are proposed to reproduce the shop-floor situation in the real world. The operating scenario assumes a flow-shop consisting of six facilities. As a result of collecting manufacturing data according to the operating scenarios, the accuracy was 96.3%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.131-135
• /
• 2017

We developed a portable card reader for the visually impaired. In South Korea, there is insufficient development of lifestyle aids for people with disabilities. Living aids for people with disabilities are being developed using information technology, smart phones, Internet of Things(IoT) devices, 3D printers, and so on. Blind people were interviewed, which showed that the card recognition function using a currently developed smart phone app was not able to recognize the screen of the smart phone by the hand of the visually impaired, and it was inconvenient to operate. In recent years, devices that enable the visually impaired to recognize cards have been studied in foreign countries and are emerging prototypes. But what is currently available is expensive and inconvenient. In addition, visually impaired people are most vulnerable to low-income families, which makes it difficult to purchase and use expensive devices. In this study, we developed a card reader that recognizes a card using a Raspberry Pi, which is an open-source hardware that can be applied to IoT. The card reader plays it by voice and vibration, and the visually impaired can use it at a low price.

• The Journal of the Korea Contents Association
• /
• v.20 no.1
• /
• pp.356-363
• /
• 2020

As a becoming era of Internet-of-Things, various devices are connected via wire or wirless networks. Although every day life is more convenient, security problems are also increasing such as privacy, information leak, denial of services. Since ECC, a kind of public key cryptosystem, has a smaller key size compared to RSA, it is widely used for environmentally constrained devices. The key of ECC in constrained devices can be exposed to power analysis attacks during scalar multiplication operation. In this paper, a key-randomization method is suggested for scalar multiplication on SECG parameters. It is against differential power analysis and has operational efficiency. In order to increase of operational efficiency, the proposed method uses the property 2^lP=∓cP where the constant c is small compared to the order n of SECG parameters and n=2^l±c. The number of operation for the Coron's key-randomization scalar multiplication algorithm is 21, but the number of operation for the proposed method in this paper is (3/2)l. It has efficiency about 25% compared to the Coron's method using full random numbers.

• Land and Housing Review
• /
• v.14 no.3
• /
• pp.125-135
• /
• 2023

In South Korea, it has been increased the necessity of supplying housing services to meet the needs and desires of various residents by reflecting various demographic and social changes. In particular, various smart device has been widely utilized in South Korea and the smart technologies, such as artificial intelligence and the Internet of Things has been developed rapidly. These smart technologies could support smart housing that allows residents to easily and comfortably employ residential services. However, it is necessary to improve the awareness of users in order to spread the smart housing residential services connected to smart technologies. For this reason, this study observed changes in users' perceptions of smart housing residential service technology using Living Lab. As a result, after experiencing the Living Lab, users' awareness of smart housing housing service increased, and it was observed that the preferred housing service technology was more detailed than before the Living Lab experience. This study shows that it is important to raise users' awareness for the dissemination of smart housing residential service technology, and that Living Lab can be an effective means for this purpose.

• Journal of Digital Convergence
• /
• v.21 no.3
• /
• pp.49-62
• /
• 2023

Due to social and cultural changes and the growth of aging people living as a single because of aging, lonely deaths are steadily increasing, and each local government has begun to define them as a social problem. The legal basis began to be established. In order to explore policy measures to prevent lonely deaths, this study examined cases of lonely death prevention policies using smart digital information technology (AI, IOT), which is being promoted by Daegu Metropolitan City to promote non-face-to-face policies to prevent lonely deaths. Policies related to lonely deaths are divided into two axes: lonely death prevention projects and post-excavation support projects. In order to operate these businesses efficiently, the provision of non-face-to-face services through artificial intelligence and the Internet of Things is recognized as a new service delivery system, so the importance and necessity of non-face-to-face services is increasing. It is time that multifaceted changes and preparations are needed, such as establishing a system to expand the non-face-to-face industry at the national level. In order to respond to another national disaster situation in the future, the non-face-to-face smart care system is being expanded in various welfare policies such as preventing lonely deaths. It will have to be activated.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.323-328
• /
• 2014

ZigBee based on the most vulnerable part of u-Healthcare system that uses the ZigBee communication is the wireless section. ZigBee communication sectors to identify vulnerabilities in this paper, we propose to compensate. ZigBee has been raised from the existing vulnerabilities organize and ZigBee also uses the 64bit address that uniquely identifies a vulnerability that was defined as exposure. And to prevent the exposure of a unique identifying address was used to address a temporary identification. ZigBee security services, the proposed system during the Network Key for encryption only use one mechanism of Residential Mode is used. Residential Mode on all nodes of the entire network because they use a common key, the key is stolen, your network's security system at a time are at risk of collapse. Therefore, in order to guard against these risks to the security policy Network Key updated periodically depending on the method used to. The proposed evaluation and comparative analysis of the system were exposed in the existing system can hide the address that uniquely identifies a public key Network Key also updated periodically, so that leaks can occur due to reduced risk.

• Journal of Convergence for Information Technology
• /
• v.11 no.4
• /
• pp.83-101
• /
• 2021

This study is to investigate, using AHP, what technologies should be applied first to Korean SMEs in order to respond to the 4th industrial revolution and change to a smart enterprise. To this end, technologies related to the 4th industrial revolution and smart factory are synthesized, and the classification criteria of Dae-Hoon Kim et al. (2019) are applied, but additional opinions of experts are collected and related technologies are converted to artificial intelligence (AI), Big Data, and Cloud Computing. As a base technology, mobile, Internet of Things (IoT), block chain as hyper-connected technology, unmanned transportation (autonomous driving), robot, 3D printing, drone as a convergence technology, smart manufacturing and logistics, smart healthcare, smart transportation and smart finance were classified as smart industrial technologies. As a result of confirming the priorities for technical use by AHP analysis and calculating the total weight, manufacturing companies have a high ranking in mobile, artificial intelligence (AI), big data, and robots, while service companies are in big data and robots, artificial intelligence (AI), and smart healthcare are ranked high, and in all companies, it is in the order of big data, artificial intelligence (AI), robot, and mobile. Through this study, it was clearly identified which technologies should be applied first in order to respond to the 4th industrial revolution and change to a smart company.

• Science of Emotion and Sensibility
• /
• v.20 no.1
• /
• pp.105-114
• /
• 2017

Nowadays, novel and innovative technology including 3D printers, internet of things (IoT), and wearable devices are rapidly emerging. As we must constantly keep up with the most recent trends, words like convergence, multidisciplinarity, and design revolution indeed define society today. Due to the expansion of such diverse technological, industrial, and academic convergence trends, the role of design is becoming evermore essential in development of products as well as creative services. Even the government is pushing towards a 'creative economy' by encouraging ICT convergence to create novel industries as well as advanced jobs. In order to adapt flexibly to such changes in global trends, a solid academic curriculum centered around 'ICT+Design' must be developed. In the current research, we analyzed various literature and benchmarked the major universities both domestic and foreign. Also we utilized a survey-based approach against subjects who are experts or design specialists working in environments related to industry and research. In our proposed integrated ICT+Design educational curriculum, students familiarize themselves with design perspectives and methodology to creatively carry out the course. Moreover, experts from design and ICT came together in an act of 'Radical Collaboration' in which they shared their unique 'Design Thinking' in order to promote understanding and cooperation. Furthermore, industry experts have also taken part as mentors in order to create a workplace-oriented course with various integrated projects. Most importantly, the course was designed so that in addition to research, students can really get hands-on with their ideas in the creativity-integrated workplace.