• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.100-107
• /
• 2005

The objective of the study is to improve the quality of wheel bearing hub by the rigid-plastic finite element analysis and the response surface methodology. The rigid-plastic finite element codes, AFDEX-2D and DEFORM-3D, were used to analyze the two-dimensional and three-dimensional forging processes, respectively. The response surface analysis is used to find the minimum underfill by the variation of design variables such as the height of billet after upsetting and punch angles of blocker dies. The metal flow of forged product shows good agreement with the results from 2D and 3D analysis. Also, the quality of the wheel bearing hub has been improved by the optimization of design variables and the machining time has been reduced by the machining allowance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.29-33
• /
• 1996

This paper aims to clatify the potimum grinding condition for the electroplated diamond wheel in form grinding of Sr-ferrite. The main conclusions obtained were as follows. (1) The flexural strength and surface roughness of ferrite became the highest at the peripheral wheel speed of 1700m/min. (2) In the case of depth of cut larger than 0.4mm, crack layers is induced in the ground surface, the fracture type of chips exhibits slight ductile mode in the depth of cut smaller than 0.2mm. (3) When the depth of cut exceed 0.6mm, the tool life becomes extermely short due to large chipping and brackage. However, at the depth of cut .geq. 0.05mm, the diamond grain shows abrasive wear. (4) The flexural strength and surface roughness increases in proportion to the feed rate.

• 한국정밀공학회지
• /
• 제26권11호
• /
• pp.35-40
• /
• 2009

This paper presents the geometrical analysis of an inclined ultra-precision grinding technology using simulations about grinding point locus for micro lens manufacturing. Simulation results show the relationship between radius ratios ($R_1/R_2$) and wheel center locus. Furthermore, the critical grinding wheel radius ($R_1$) can be calculated from work-piece radius ($R_2$) and inclined angle ($\theta=-45^{\circ}$). These achievements could be applied to calculate CNC data in ultra-precision grinding and give insight for wheel wear and compensation grinding.

• 한국기계가공학회지
• /
• 제2권2호
• /
• pp.5-13
• /
• 2003

In this study, experiments of high speed grinding had been earned out in a STD11 specimen for evaluating the grindability with designed CBN grinding wheels Ground surfaces were analyzed and evaluated by means of surface Integrities and wheel damages. The surface roughness and 3 dimensional profile had been used for analyzing the micro-surface integrity. The residual stress of the ground surface had been measured by the x-ray diffraction method. Also, the surface state of the ground specimens and the grinding wheels were evaluated by a metallurgical microscope and SEM system after high speed grinding in order to choose the suitable machining conditions.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.76-82
• /
• 2014

In this paper, an optimal power distribution algorithm is proposed for the small electric vehicle with front in-line and rear in-wheel motors. First, it is assumed that the vehicle driving torque and velocity are given conditions. And, an optimal problem is defined that finding the front and rear motor torques which minimizes the battery power. From the above optimization problem, the optimized front-rear motor torque distribution map is obtained. And, the vehicle simulations are performed to verify the performance of the optimal power distribution algorithm which is proposed in this study. The simulations are performed based on the federal urban driving schedule for two cases which are constant ratio power distribution, and optimal power distribution. From the simulation results, it is found that the optimal power distribution shows the 6.3% smaller battery energy consumption than the constant ratio power distribution.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.1-6
• /
• 2014

In-wheel driving inverter inside engine room sometimes operates in the harsh environment like high temperature of about $105^{\circ}C$. Especially, the size and power density of the inverter has become smaller and more increased. Thus, it is essential to manage the temperature of the inverter with IGBT (Insulated Gate Bipolar Transistor) switching devices for performance and endurance, because the temperature can be getting increase. In this paper, we performed the thermal flow analysis of inverter models with wave type and pin fin type cooling channels, and investigated the heat transfer characteristics of the inverter models using cooling water on channels at 8 L/min and $65^{\circ}C$. Also, we compared the thermal performance under various conditions such as coolant flow rate and layered power module structure. Therefore, we determined the feasibility of the initial inverter models and the thermal performance enhancement.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제12권2호
• /
• pp.154-161
• /
• 2012

This article presents experimental studies of fuzzy logic application to control a two-wheel mobile robot(TWMR) system. The TWMR system is composed of two systems, an inverted pendulum system and a mobile robot system. Although linear controllers can stabilize the TWMR, fuzzy controllers are expected to have robustness to uncertainties so that the resulting performances are expected to be better. Nominal fuzzy rules are used to control balance and position of TWMR. Fuzzy logic is embedded on a DSP chip to control the TWMR. Balancing performances of the PID controller and the fuzzy controller under disturbances are compared through extensive experimental studies.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.165-172
• /
• 2003

This study aims to find frequency weighting curves for the evaluation of drivers' discomfort by vertical and rotational steering wheel vibration. Equal sensation curves, inverse of frequency weighting curves, were determined for the two kinds of vibrations respectively by using the sinusoidal signals with reference amplitudes from 0.2 to 0.4 m/s2 in the frequency range from 5 to 100 ㎐. Twelve subjects joined at the tests, and median values of the twelve judgments were used to determine the equal sensation curves. An experiment was followed to compare the relative sensation magnitude between the two kinds of equal sensation curves, which showed discomfort by the rotational vibration was 1.5 times of that by the vertical vibration at 50 ㎐.

• 한국융합학회논문지
• /
• 제9권8호
• /
• pp.179-184
• /
• 2018

자동차의 구동방식은 전륜구동, 후륜구동, 4륜구동의 방식이 있다. 구동방식에서 운전자가 원하는 방향으로 전환하는 것과 바퀴에 동력을 전달하여 구동하는 두 가지의 역할을 수행하는데 있어 가장 중요한 부품이 등속 조인트이다. 도로상에서 주행 시에는 노면의 상태에 따라서 동력을 전달하는 부품들에 충격이 가해질 수 있다. 본 연구에서는 각각 샤프트의 길이가 다른 3개의 등속 조인트 각 모델들은 CATIA로 모델링하였고 ANSYS를 이용하여 구조 및 피로해석을 수행하였다. 본 연구 결과로는 Model 2가 다른 모델 대비 뛰어난 내구성을 가짐을 알 수 있었다. 이러한 결과를 이용하여 충격에 대한 내구성을 가지는 등속 조인트 설계를 할 때에 유용한 자료가 될 것이라고 사료되며, 등속 조인트의 디자인을 융합기술에 접목하여 미적 감각을 나타낼 수 있다.

• 한국기계가공학회지
• /
• 제11권1호
• /
• pp.113-118
• /
• 2012

Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.